基于键合图的车用蓄电池建模与仿真

按照键合图的规则,分别建立了蓄电池等效电路的键合图模型和冷却系统的键合图模型,然后将电系统和热系统耦合在一起,实现了蓄电池系统的键合图模型,最后建立了蓄电池的数学模型和仿真模型,并实现了动态仿真。     

高压喷射注浆技术在基坑管涌处理中的运用

高压喷射注浆法是在注浆法的基础上，应用高压喷射技术而发展起来的一项新的地基加固方法。本文针对武汉市泰合广场基坑在开挖过程中形成管涌或流上而致使附近建筑物遭受严重破坏的问题，采用高压喷射注浆法施工工艺方法，杜绝了基坑壁管涌或流立现象，使基坑开挖和基础施工得以安全进行。     

关于一、三级公路安全性认知因素的试验建模研究

在实测86处一级公路典型路段和188处三级公路典型路段道路结构基础上,确定驾驶员对国道一、三级公路的安全性认知因素集,进而针对一级公路的38处样本路段和三级公路的77处样本路段,组织47名驾驶人员进行现场认知评价试验,并应用模糊集合原理和模糊统计方法对评价试验得到的2829组(一级路673组、三级路2156组)有效认知试验评语数据进行分析处理,得到一、三级公路安全性认知因素的模糊评价隶属函数,从而给出驾驶人员对一、三级公路道路条件和交通环境的安全性模糊评价模型。     

超大跨度斜拉桥施工过程力学行为

斜拉桥结构效应在施工过程中具有典型的时空变化特性，但目前对效应的时程特性及时空包络关注较少。建立精细的几何非线性分析模型，分析主跨1088m的苏通大桥施工过程力学行为，包括施工阶段效应增量、效应时程、效应包络及恒载效应。研究结果有助于结构设计和施工控制。     

Predicting the adoption of connected autonomous vehicles: A new approach based on the theory of diffusion of innovations

On the grounds that individuals heavily rely on the information that they receive from their peers when evaluating adoption of a radical innovation, this paper proposes a new approach to forecast long-term adoption of connected autonomous vehicles (CAVs). The concept of resistance is employed to explain why individuals typically tend to defer the adoption of an innovation. We assume that there exists a social network among individuals through which they communicate based on certain frequencies. In addition, individuals can be subject to media advertisement based on certain frequencies. An individual’s perceptions are dynamic and change over time as the individual is exposed to advertisement and communicates with satisfied and dissatisfied adopters. We also explicitly allow willingness-to-pay (WTP) to change as a result of peer-to-peer communication. An individual decides to adopt when (i) there is a need for a new vehicles; (ii) his/her WTP is greater than CAV price; and (iii) his/her overall impression about CAVs reaches a cutoff value. Applicability of the proposed approach is shown using a survey of employees of the University of Memphis. Our results show that the automobile fleet will be near homogenous in about 2050 only if CAV prices decrease at an annual rate of 15% or 20%. We find that a 6-month pre-introduction marketing campaign may have no significant impact on adoption trend. Marketing is shown to ignite CAV diffusion but its effect is capped. CAV market share will be close to 100% only if all adopters are satisfied with their purchases; therefore, the probability that an individual becomes a satisfied adopter plays an important role in the trend of adoption. The effect of the latter probability is more pronounced as time goes by and is also more prominent when CAV price reduces at greater rates. Some caveats may be inserted when considering the study results as the findings are subject to sample bias and data limitations.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

桩基建模方法对自升式钻井平台动力响应的影响

随着海洋油气开采作业水深的不断增加,海洋平台固有频率随之降低,易与相同频率成分的波浪产生共振,因此对平台动力响应特性研究是非常有必要的,而桩基模型在平台动力响应分析中发挥着关键作用。以某400英尺自升式钻井平台研究对象,基于等效建模的思想,分别建立了固支桩基、铰接桩基、线性弹簧桩基及非线性弹簧桩基四种有限元模型,并对其进行静力分析、模态分析及瞬态动力学分析,通过对比得到的振动频率、动力放大因子及波流惯性力,得出弹簧桩基模型在平台动力响应分析中的有效性及合理性结论。     

基于工作过程系统化的汽车车身修复技术课程设计

本文以基于工作过程系统化思想,对汽车车身修复技术课程进行了设计.阐述了本课程基于工作过程系统化的课程设计思路、学习情境设计、课程教学方法及考核方法设计.     

轨道交通车辆的工艺流程标准化

从生产线建立、工艺流程编制、工艺布局设计和生产能力等方面进行分析,提出了轨道交通车辆工艺流程标准化设计方法和优化方法。基于精益管理理念和工序能力测算法,可以合理编制标准化工艺流程,从而降低劳动强度,提高生产效率。     

散粮输送工艺设备分析

通过对散粮输送行业中常见的工艺设备进行探究,分析设备运行过程中可能存在的问题,提出合理的解决方案,为散粮系统工艺设计及工程运行提供重要参考意义。