下穿既有公路的土江冲隧道双层管棚设计及监测分析

位于常—吉高速公路上的土江冲隧道是一座下穿既有公路的四车道连拱隧道,施工中为了控制地面沉降,在洞口段采用双层管棚作为辅助施工方法,保证了隧道施工安全和319国道的畅通;在隧道开挖过程中,掌子面附近的管棚变形最大,隧道开挖纵向影响范围为1.5~2.0倍开挖高度。文章介绍了管棚设计、施工情况和监测结果。     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

基于层次分析法的交通运输节能减排示范项目绩效评价研究

交通运输是国家节能减排工作的重点领域,为促进交通运输节能减排技术发展,开展交通运输节能减排示范项目是政府部门一项重要的政策措施。对示范项目进行绩效评价工作能衡量财政资金投入政策实施效果,也是交通运输主管部门非常关注的问题。在交通运输节能减排示范项目绩效评价的逻辑框架下,运用层次分析法建立交通运输节能减排示范项目绩效评价指标体系及权重值,具有较好的实操性,能为开展同类型项目的绩效评价工作提供参考。     

综合交通线网规划方案合理性评价内涵探讨

文章从合理性的一般哲学解释出发,论证出综合交通线网规划方案合理性存在的必然性,然后分别从多方式合理分工、各交通线路分阶段整体推进、交通线网投资实施总体控制、交通网络构建符合OD分布规律、以及线网规划目标考虑资源消耗限制等方面,深入分析合理的综合交通体系应具备的特征,并由此推荐系列评价指标集,从而为综合交通线网规划方案合理性评价提供理论依据。     

成品油管道水击保护

长距离成品油管道在密闭输送过程中,出现非正常停泵、误关阀门及混油界面经过泵等均会引起水击现象发生。水击波沿管道传播,极易导致管道局部超压而造成管道破裂、损坏设备等,故水击保护成为成品油管道密闭输送关键性的工艺技术之一。金嘉湖成品油管道在全线水击保护控制方面采用了进出站压力调节系统、分输站分油流量调节系统、出站压力超高泄放系统、进站低压泄放保护系统、进出站压力超限停泵联锁保护系统来保证管道事故工况时的安全。     

大城市中心区实施拥堵收费的影响评价研究

文章在分析大城市中心区拥堵收费实施条件与方式的基础上,定性分析实施拥堵收费对居民出行行为以及中心区动静态交通的影响,最后提出基于模糊评价理论的中心区拥堵收费影响评价模型.     

隧道长度对瞬变压力的影响

与阻塞比和车速不同,隧道长度对瞬变压力的影响呈现出明显的非单调性。这是在高速铁路隧道设计中必须考虑的问题。根据现场实测资料,研究分析了压力波的传播、反射和叠加规律,提出了单线隧道相应于压力变化不同情况的"最不利隧道长度"的计算图表及公式。     

Assessing asymmetric response effect of behavioral intention to service quality in an integrated psychological decision-making process model of intercity bus passengers: a case of Taiwan

This study introduces the concept of loss aversion to consumer behavioral intention at the personal psychological level to develop an integrative structural equation model for analyzing traveler psychological decision making. In this model, the relationship between behavioral intention and service quality is a non-smooth function based on the theory of loss aversion. The expectation service quality in the SERVQUAL model proposed by Parasuraman, Zeithaml, and Berry (PZB) serves as a reference point. This model can be applied to analyze the effect of non-smooth response of behavioral intention to service quality in a traveler psychological decision-making process model. Intercity travel among cities in Taiwan is used as an empirical example. Data were gathered in cities in Taiwan via a questionnaire survey, and the model was tested using path analysis performed by LISREL. The empirical result shows that all causal relationships are statistically significant. Service quality loss influences repurchase intention more than does Service quality gain. Finally, this study concludes by discussing managerial implications and suggesting directions for future research.

The problem of cold starts: A closer look at mobile source emissions levels

While the phenomenon of excess vehicle emissions from cold-start conditions is well known, the magnitude and duration of this phenomenon is often unclear due to the complex chemical processes involved and uncertainty in the literature on this subject. This paper synthesizes key findings regarding the influence of ambient and engine temperatures on light-duty vehicle (LDV) emissions. Existing literature, as well as analytical tools like the U.S. Environmental Protection Agency’s Motor Vehicle Emission Simulator (MOVES), indicate that while total vehicle emissions have dropped significantly in recent years, those associated with cold starts can still constitute up to 80% for some pollutant species. Starting emissions are consistently found to make up a high proportion of total transportation-related methane (CH₄), nitrous oxide (N₂O), and volatile organic compounds (VOCs). After 3–4 min of vehicle operation, both the engine coolant and the catalytic converter have generally warmed, and emissions are significantly lower. This effect lasts roughly 45 min after the engine is shut off, though the cooling rate depends greatly on the emission species and ambient temperature. Electrically (pre-)heated catalysts, using the bigger batteries available on hybrid drivetrains and plug-in vehicles, may be the most cost-effective technology to bring down a sizable share of mobile source emissions. Trip chaining (to keep engines warm) and shifting to non-motorized modes for shorter trips, where the cold start can dominate emissions, are also valuable tactics.