福州轨道交通建设安全管控平台的设计与应用

福州城市轨道交通建设规模不断增大，复杂的地质、环境条件以及众多工种施工的交叉作业和人员活动，给安全生产带来挑战。针对建设全过程安全管控的具体业务关系和需求分析，梳理和固化工作岗位、职责、流程、响应、整改等安全管理的事项和要求，强化对管控过程的追溯和考核管理。研究信息平台的业务需求、平台架构、网络拓扑、功能模块、数据库设计方法和实现思路，利用Ssm框架、Quartz框架、Encache技术以及SQLServer数据库技术，设计开发基于B/S模式的城市轨道交通安全管控信息系统，应用于在建的5条线路。信息平台的应用，可实现安全管理的标准化、科学化和精细化，极大地提高管理水平和工作效率。     

考虑收益管理的高铁平行车次动态差别定价

基于RP(Revealed Preference)和SP(Stated Preference)调查数据，利用潜在类别模型对高铁旅客进行细分，得到旅客对平行车次不同服务属性，如列车运行时间、发车时段和舒适度的偏好程度，并对其进行量化；引入收益管理，以多列车整体收益最大为目标，构建平行车次动态差别定价模型，并设计模拟退火算法进行求解；最后，通过京沪高铁进行实例验证.结果表明：与固定票价进行客票销售相比，所提方案能够适应高峰期和平峰期不同客流特点，提高铁路客票总收益，为高铁平行车次灵活定价提供参考.     

BIM技术在清华珠三角公建项目施工中的应用研究

随着科技的进步及项目管理水平的提高,BIM技术应运而生。本文以清华珠三角研究院粤港澳大湾区创新基地项目为依托,从应用目标、应用前准备工作、前期策划管理、技术管理、质量安全管理、物资设备管理、进度管理、经济成本管理等方面开展BIM技术在公建项目施工中的应用研究,结果表明:使用BIM技术,使项目管理走向精细化、全面化、高效化,并提高质量标准,增加安全保障,减少项目成本,提高项目利润率;同时与AI技术相结合,使BIM技术更加具有简便性,产出更大效益。     

轨道交通信号控制系统LCC估算方法研究与应用

从产品全生命周期成本概念出发,阐述了轨道交通信号控制系统生命周期的特点和成本构成;从企业视角提出了一种轨道交通信号控制系统的LCC估算方法;通过企业项目成本管理信息化系统统计产晶LCC的各项数据,结合财务数据进行归一化估算,并定期进行回归迭代,规范化实施分析与评价,从而得出产話的LCC改进建议,为公司战略决策提供了重要参考依据。     

Optimal bus fleet management strategy for emissions reduction

Transportation is a major cause for environmental degradation via exhaust emissions. For many transit-oriented metropolitan areas, bus trips often constitute a sizeable mode share. Managing the bus fleet, in particular updating buses to comply with the newer emissions standards, therefore, can have a substantial impact on transportation-induced air quality. This paper presents the approach of remaining life additional benefit–cost (RLABC) analysis for maximising the total net benefit by either early-retiring or retrofitting the current bus fleet within their lifespans. By referring to the net benefits for different bus types estimated by RLABC analysis, the most beneficial management scheme for the current bus fleet can be identified. Optimal bus fleet management (BFM) models based on the RLABC analysis for the operator and the government are developed. Then a government subsidy plan is produced to achieve win–win solutions, which will offer efficient and flexible management schemes. To illustrate the approach, the largest bus company in Hong Kong, which carries more than 23% of the total trips in Hong Kong, is taken as a case study example. Instead of adopting a fixed retirement plan, such as replacing buses at the age of 17 as is currently practised, the proposed method develops an optimal BFM scheme that progressively phases out buses or retrofits them. This study produces promising results to demonstrate the large benefit of this approach for optimal bus fleet management.     

双块式轨枕外形质量快速检测系统研制及应用

SK?2型双块式混凝土轨枕是高速铁路无砟轨道结构中的重要预制件,单一生产厂日均产量达到800~1400根,但目前的人工检测方式无法满足双块式轨枕的出厂检验要求。本文提出的双块式轨枕外形质量快速检测系统可满足TB/T 3397—2015《CRTS双块式无砟轨道混凝土轨枕》的出厂检验要求,与双块式轨枕生产线相匹配,大大提高了检测效率,实现了双块式轨枕全参数、自动化、智能化检测。检测数据自动上传至生产管理平台,可对双块式轨枕生产质量进行跟踪管理。     

重大铁路工程标准化开工组织清单化管理研究

随着铁路建设的发展,标准化管理水平越来越高,对工程质量的提升效果也越来越明显。但目前铁路工程开工标准化在操作过程上缺少科学管理方法和管理手段,开工标准化流于形式,影响后续主体工程施工。对此,文章创新性地提出重大铁路工程标准化开工组织清单化管理的思路,提出工作流程,设计管理实施方案,并在某重大铁路工程进行运用,取得良好效果。标准化开工组织清单化管理对于重大铁路工程的高质量、快速开工具有重要的指导意义。     

面向生产管理信息化的涂装智能设计系统

研究分析涂装设计工艺流程、涂装生产管理流程及涂装机器人工艺参数，整理分析涂装工艺数据、生产管理信息和涂装机器人的工艺特征，对这些数据进行整理归纳，理清他们之间的逻辑关系，形成数据接口，通过数据库系统完成涂装规范化设计和生产管理以及涂装机器人的对接。     

The problem of cold starts: A closer look at mobile source emissions levels

While the phenomenon of excess vehicle emissions from cold-start conditions is well known, the magnitude and duration of this phenomenon is often unclear due to the complex chemical processes involved and uncertainty in the literature on this subject. This paper synthesizes key findings regarding the influence of ambient and engine temperatures on light-duty vehicle (LDV) emissions. Existing literature, as well as analytical tools like the U.S. Environmental Protection Agency’s Motor Vehicle Emission Simulator (MOVES), indicate that while total vehicle emissions have dropped significantly in recent years, those associated with cold starts can still constitute up to 80% for some pollutant species. Starting emissions are consistently found to make up a high proportion of total transportation-related methane (CH₄), nitrous oxide (N₂O), and volatile organic compounds (VOCs). After 3–4 min of vehicle operation, both the engine coolant and the catalytic converter have generally warmed, and emissions are significantly lower. This effect lasts roughly 45 min after the engine is shut off, though the cooling rate depends greatly on the emission species and ambient temperature. Electrically (pre-)heated catalysts, using the bigger batteries available on hybrid drivetrains and plug-in vehicles, may be the most cost-effective technology to bring down a sizable share of mobile source emissions. Trip chaining (to keep engines warm) and shifting to non-motorized modes for shorter trips, where the cold start can dominate emissions, are also valuable tactics.     

Including congestion effects in urban road traffic CO2 emissions modelling: Do Local Government Authorities have the right options?

Tailpipe emissions from vehicles on urban road networks have damaging impacts, with the problem exacerbated by the common occurrence of congestion. This article focuses on carbon dioxide because it is the largest constituent of road traffic greenhouse gas emissions. Local Government Authorities (LGAs) are typically responsible for facilitating mitigation of these emissions, and critical to this task is the ability to assess the impact of transport interventions on road traffic emissions for a whole network.This article presents a contemporary review of literature concerning road traffic data and its use by LGAs in emissions models (EMs). Emphasis on the practicalities of using data readily available to LGAs to estimate network level emissions and inform effective policy is a relatively new research area, and this article summarises achievements so far. Results of the literature review indicate that readily available data are aggregated at traffic level rather than disaggregated at individual vehicle level. Hence, a hypothesis is put forward that optimal EM complexity is one using traffic variables as inputs, allowing LGAs to capture the influence of congestion whilst avoiding the complexity of detailed EMs that estimate emissions at vehicle level.Existing methodologies for estimating network emissions based on traffic variables typically have limitations. Conclusions are that LGAs do not necessarily have the right options, and that more research in this domain is required, both to quantify accuracy and to further develop EMs that explicitly include congestion, whilst remaining within LGA resource constraints.