基于对流效应的寒区路堤块石层临界高度研究

为了研究块石路堤降温效应与块石层高度之间的关系,基于多孔介质自然对流理论和热传导理论引入了表征寒区块石路堤自然对流降温效应的自然对流指数,利用热传导温度分布函数获得了路堤自然对流指数随块石层高度变化的近似公式。分析表明:自然对流指数最小值对应于路堤块石层的最小高度,而其最大值对应于路堤块石层的最大高度。另外介绍了一种利用自然对流指数近似公式估算路堤块石层临界高度的方法,并具体给出了算例,最后进行了数值验算。结果表明:通过自然对流指数确定的临界高度可为寒区工程的路堤设计提供参考。     

治理公路超载超限运输的长效机制和对策研究

为建立治理超载超限运输的长效机制,首先建立了运输企业收入的计量模型,分析了企业利润与运输价格、运输成本、超载罚款等变量之间的互动关系及企业获得最大利润的条件。在此基础上,针对中国道路货运市场结构的特点,从理性经济人的角度,对运输企业在“惩罚博弈”下可能的行为选择进行了研究;其次结合美国治理超载超限运输的经验,分析了不同执法强度和执法密度组合的执法策略及其适用条件、执法效果等,对中国治理超载超限运输提出了解决方案和具体的政策建议,对中国治理超载超限运输具有指导意义。     

内燃机活塞-缸套-活塞环系统工作状态的识别方法

提出了一种基于证据理论方法的内燃机活塞—缸套—活塞环系统工作状态的识别方法。通过搭建试验台架,从实车试验中获取曲轴箱压力信号和机身振动加速度信号;提取试验特征值,组建模型样本和试验样本,并运用证据理论信息融合方法对内燃机的工作状态进行识别。研究结果表明:应用证据理论信息融合方法融合曲轴箱压力信号和机身振动加速度信号,进而识别活塞—缸套—活塞环系统的工作状态这一方法有效、可行。     

基于Vesic圆孔扩张理论的桩周土抗力计算方法研究

随着目前城市建筑物容量的增大,对作为其主要承载构件的桩基础的承载性能提出了更高的要求.桩-土相互作用问题是桩基水平承载性能研究中必须考虑的重要内容,该问题的研究对于完善桩基础设计理论和指导工程实践具有重要意义.基于Vesic圆孔扩张理论,分析水平荷载作用下桩侧土体的实际受力状态,根据桩身产生水平位移后桩周土应力为近似椭...     

Shockwave-based queue estimation approach for undersaturated and oversaturated signalized intersections using multi-source detection data

With the progress of information and sensing technologies, estimating vehicular queue length at signalized intersections becomes feasible and has attracted considerable attention. The existing studies provided a solid theoretical foundation for the estimation; however, the studies have some restrictions or limitations more or less. This paper presents a new methodology for estimating vehicular queue length at signalized intersections using multi-source detection data under both undersaturated and oversaturated conditions. The methodology applies the shockwave theory to model queue dynamics. Using data from probe vehicles and point detectors, analytical formulations for calculating the maximum and minimum (residual) queue lengths of each cycle are developed. Ground truth data were collected from numerical experiments conducted at two intersections in Shanghai, China, to verify the proposed methodology. It is found that the methodology has mean absolute percentage errors of 17.09% and 12.28%, respectively, for maximum queue length estimation in two tests, which are reasonably effective. However, the methodology is unsatisfactory in estimating the residual queue length. Other limitations of the proposed models and algorithms are also discussed in the paper.     

信息影响条件下考虑出行异质性的路径选择模型

出行者路径选择行为的研究对于预测城市交通流时空分布规律及维持网络经济、高效运转具有重要意义.为了探究多类型异质出行者路径选择行为的异同,研究了基于累积前景理论的多类别异质出行者路径选择模型.通过定义出行者参考点,引入考虑时间价值系数的风险敏感系数计算方法,以保证异质出行者拥有异质的风险偏好,研究分析了是否提供实时路况信息2种情境下常规通行者与通勤者路径选择行为的异同.数值算例表明,拥有较大参考点的出行者更倾向于保守地选择一条出行时间较长的道路,而其他人则更加冒险.此外,与通勤者相比,当备选方案均可以满足自身出行需求且自身参考点足够大时,常规出行者更愿意忽视风险,以获得更高的出行收益.     

船舶能效数据清洗方法研究

船舶能效数据清洗对于建立准确的船舶能效模型,提高船舶能效计算和分析的准确度,指导船舶节能航行具有重要意义.对船舶能效数据的故障特征进行了分析,运用阈值理论、船舶航行关联理论对故障数据进行了识别,运用插值法和灰色关联理论方法对水深、对水航速以及主机油耗数据中的异常数据进行修正,并且根据数据错误特征和数据清洗方法制定了船舶能效数据清洗流程,以内河邮轮"凯娅号"船舶上安装的船舶能效数据采集系统采集到的能效数据为研究对象,对数据清洗结果进行了分析.结果表明,水深数据修正值与实测值平均误差为1.58%,油耗数据、对水航速数据修正值与实测值平均误差为2.8%,1.5%,误差较小,能够满足后续建模以及数据挖掘等工作.     

Method for obtaining the wheel–rail contact location and its application to the normal problem calculation through ‘CONTACT’

This work presents a robust methodology for calculating inter-penetration areas between railway wheel and rail surfaces, the profiles of which are defined by a series of points. The method allows general three-dimensional displacements of the wheelset to be considered, and its characteristics make it especially suitable for dynamic simulations where the wheel–rail contact is assumed to be flexible. The technique is based on the discretisation of the geometries of the surfaces in contact, considering the wheel as a set of truncated cones and the rail as points. By means of this approach, it is possible to reduce the problem to the calculation of the intersections between cones and lines, the solution for which has a closed-form expression. The method has been used in conjunction with the CONTACT algorithm in order to solve the static normal contact problem when the lateral displacement of the wheelset, its yaw angle and the vertical force applied in the wheelset centroid are prescribed. The results consist of smooth functions when the dependent coordinates are represented as a function of the independent ones, lacking the jump discontinuities that are present when a rigid contact model is adopted. Example results are shown and assessed for the normal contact problem for different lateral and yaw positions of the wheelset on the track.     

钢管混凝土拱桥在车辆荷载作用下的非线性动力响应分析

根据随动硬化理论和钢管混凝土组合材料恢复力模型 ,提出了复杂应力状态下钢管混凝土组合材料的弹塑性应力应变关系。采用非线性有限元法 ,对一钢管混凝土拱桥进行移动车辆荷载作用下车—桥体系的动力响应分析 ,并进一步研究钢管混凝土组合材料进入塑性后对体系振动的影响 ,取得了较满意的结果 ,为钢管混凝土拱桥动力性能评价提供参考。     

沥青混合料转运车模型试验研究

在分析沥青混合料转运车的工作原理及作用的基础上,根据相似理论,设计了沥青混合料转运车相似模型,试验揭示了其结构参数对改善沥青混合料离析程度的影响,得出了材料离析率与螺旋轴转速、螺距及螺旋半径之间的关系,为沥青混合料转运车的设计开发提供科学可靠的依据。