运河漕舫木包钢技术研究

在充分考虑建造工艺的基础上提出三种木包钢方案,采用有限元软件进行连接构件的结构强度计算,以此为基础选择了最为可行的方案,论文研究为木包钢技术提供了理论依据及设计参考。     

如何应对化学品分类协会检查

为了帮助散装化学品船舶船长和岸基管理人员更细致、更深入地了解化学品分类协会检查,介绍其背景,检查目的、要求和程序。通过分析某公司近年来20余条散装化学品船舶CDI检查结果,总结出CDI检查前的应做的准备工作、检查过程中具体应对措施,并给出了如何减少CDI检查中遗留的观察项的建议。     

光电码盘脉冲信号四倍频检测方法的分析与研究

基于各类汽车、船艇、以及机电系统中大量涉及的角度测量问题,着重介绍了一种利用增量式光电码盘进行角度测量以及提高测量精度的原理和方法。针对实际应用中因电路设计不当造成较多误码的问题,进行分析和研究,并设计了相应的电路。该方法已成功应用于实船测角系统中,实际应用验证了该方法的有效性。     

低液限粉质粘土改良方法初探

按照一定的比例。将石灰或砂砾与低液限粉质粘土掺拌,能有效地减小低液限粉质粘土的胀缩性,具有较高的实用价值。     

海流能轮机叶片翼型的水动力学特性模拟

基于卧式海流能发电装置,采用雷诺平均N-S方程,对来流攻角从0°~26°情形下的叶片翼型进行数值模拟,分析比较不同攻角下水动力学特性的变化规律。结果表明:一定范围内增加攻角可有效提高升阻比,但升力系数最大时,升阻比、水翼捕能效率不一定最高,失速角也不一定是最佳攻角,验证了水翼失速的根本原因是边界层的分离;水翼吸力面与压力面的压差较大,此压差为水翼提供较高的升力系数,主要来自于水翼的前半部。此外,还分析了水翼周围流场的速度分布、压力分布等水动力特性与攻角的关系,为设计高效的海流能转换叶片提供了理论参考。     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A Study of Prevention Techniques for Tunnel Lining Defects北大核心CSCD

Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

整体推进式桩基码头结构设计与施工

针对在拉美和非洲地区部分码头建设中,存在大型船机设备缺乏和长周期波较为明显、常规打桩船作业和预制构件安装困难的问题,基于一般桩基码头结构,在设计和施工两个方面进行优化,采用桩顶施工行走平台方法施工,利用桩基自身作为支撑结构,大量采用叠合式上部结构,实现将海上施工转化为陆上施工的创新,形成整体推进式桩基码头结构,规避大型船机设备缺乏和长周期波较为明显的问题,具有良好的经济性和对强震区的适应性。     

制动器在水力式升船机中的应用

依托景洪升船机工程,探讨水力式升船机制动器的应用。通过对比分析电力驱动和水力驱动式升船机制动器的布置特点及工作方式,阐述制动器在水力式升船机中面临的新的技术问题,据此对水力式升船机制动器的制动力、同步性以及制动方式提出设计指标和要求,并探讨制动器的使用范围。建议水力式升船机制动器采用常开式,升船机正常运行时,制动器在船厢上、下游对接时投入使用。     

中外航道设计中波浪富裕水深确定方法对比

通过对比国内外航道设计规范中波浪富裕水深的确定方法,系统分析影响波浪富裕水深的主要因素,结合全球波浪要素的分布情况讨论各国方法的适用范围,并通过实例计算对波浪要素的影响进行对比分析。结果表明,各国规范大多以波高、船浪夹角、波周期为自变量来确定波浪富裕水深,波浪富裕水深与波高成正比,最不利船浪夹角通常是90°或45°左右,波浪富裕水深通常会随波浪周期的增大而增大,当船舶固有周期接近遭遇波浪周期时有极大值。