基于行为识别的智能车纵向决策研究

针对智能车纵向决策问题,提出基于环境车辆偏离车道程度识别运动模式的方法;构建动态环境车辆横纵向轨迹预测模型,并求解;构建保持、先行、避让在内的决策集,提出基于预测轨迹的单个车辆决策方法,并基于所有动态环境车辆的决策结果在加速、减速和匀速3 种结果中做出综合决策. 实车实验表明：在直行、换道和转弯运动模式下轨迹预测平均误差分别为0.11,0.29,0.80 m,预测精度较高;复杂动态环境下,本文提供的纵向决策信息提升了智能车行驶的安全性和舒适性.     

路侧公交专用车道模式下右转交织长度建模

在设置路侧公交专用道的交叉口处,可通过划定交织区的方式允许右转车辆借用一定长度的公交专用道通行.合理规划公交车与右转车的交织区长度有利于提高借道右转的通行效率,减少在交织区前的排队车辆数从而降低道路混乱程度,保障公交车的专用路权.本文分析了公交站点影响下的公交车车头时距分布,建立了右转车穿越交织区长度计算模型,并结合实际调查数据进行了算例分析和模型验证.研究成果可为公交优先条件下的交叉口空间优化设计提供理论参考.     

道路交通安全水平预测的统计模型

为了评价和预测不同国家的道路交通安全水平,建立通用的统计模型,作者首先分析道路交通事故死亡率与人口规模、机动车保有量、道路里程以及人均GNP之间的相关关系,根据相关性选择影响道路交通事故的因素,并建立万车死亡率与人均GNP之间的函数关系.模型计算结果与校核数据对比分析表明,所提出的模型能够较好地评价和预测一个国家或地区的道路交通安全水平.模型对交通管理者提高交通安全性的科学决策具有重要指导意义.     

基于键图理论对安装EPS系统的车辆操纵稳定性的仿真分析

应用键图理论建立电动助力转向系统(EPS)的模型,将电动助力转向系统的键图模型和matlab的simulink仿真方框图相连接,并利用simulink的可视化功能实现汽车操纵稳定性的可视化仿真,仿真结果表明,将simulink仿真工具箱与键图模型相结合,可使汽车性能分析研究更为直观和简洁.     

Autonomous vehicle perception: The technology of today and tomorrow

Perception system design is a vital step in the development of an autonomous vehicle (AV). With the vast selection of available off-the-shelf schemes and seemingly endless options of sensor systems implemented in research and commercial vehicles, it can be difficult to identify the optimal system for one’s AV application. This article presents a comprehensive review of the state-of-the-art AV perception technology available today. It provides up-to-date information about the advantages, disadvantages, limits, and ideal applications of specific AV sensors; the most prevalent sensors in current research and commercial AVs; autonomous features currently on the market; and localization and mapping methods currently implemented in AV research. This information is useful for newcomers to the AV field to gain a greater understanding of the current AV solution landscape and to guide experienced researchers towards research areas requiring further development. Furthermore, this paper highlights future research areas and draws conclusions about the most effective methods for AV perception and its effect on localization and mapping. Topics discussed in the Perception and Automotive Sensors section focus on the sensors themselves, whereas topics discussed in the Localization and Mapping section focus on how the vehicle perceives where it is on the road, providing context for the use of the automotive sensors. By improving on current state-of-the-art perception systems, AVs will become more robust, reliable, safe, and accessible, ultimately providing greater efficiency, mobility, and safety benefits to the public.     

中国智能网联汽车测试示范区发展调查研究

围绕测试场地建设、基础设施、测试能力、服务配套等方面,综合分析国内测试示范区发展现状及水平,归纳其面临的突出和共性问题。在此基础上,提出了加强测试示范区统筹协调、加快标准制定、推进测试结果互认和数据共享、建立交流沟通机制等措施和建议。     

电气化公路技术研究

交通是能源消纳的重要领域，其对社会能源结构的调整和节能减排具有重要的影响和带动作用。在陆路交通方面，轨道交通和小型客运车辆的电气化发展方向相对清晰，而公路货运尚无明确的技术路线。为充分利用清洁能源，减少化石能源在交通领域中的使用，发展并推广电气化公路技术，对重载卡车的蓄电池、燃料电池、混合动力3种电气化方案进行对比分析，结合卡车负载的特点，对不同电气化方案进行评估。研究融合新能源发电及并网、混合动力技术、智能驾驶技术的电气化公路技术，从车辆动力技术、供电线路、受电弓与计费、新能源并网、编组智能驾驶运行5个方面对电气化公路方案进行介绍，可以实现公路货运系统的绿色、安全、高效运行。以10公里线路电气化为例，进行规划和成本估算，构建单车和区域（或路段）电气化的运营成本计算模型，基于燃油消耗和阻力分析2种方法进行计算。对车辆购置及改装、基础设施建设、可再生能源发电、系统环保效益等4个方面进行技术分析与成本测算。从供能技术变革、商业模式和推广路线3个角度对电气化公路技术的未来推广进行论证展望。研究结果表明：电气化公路技术的应用与规模化能够带来巨大的经济与环境收益，其中的混合动力方案与架空线输电方案为面对未来可能的储能技术变革与无线输电普及打下重要的基础，提供了拓展空间，也是重载货车实现智能驾驶的重要步骤；与燃油驱动相比，电驱动百公里成本减少96元，单一重卡年运营成本减少18.8万元，百公里污染物（如：碳氧化物、氮氧化物等）均减少50%以上。     

基于风险网络的轨道交通车辆风险评价

针对轨道交通车辆系统的风险网络和关键部件风险评价开展研究，以系统部件和部件连接关系作为节点和边，建立了风险网络模型，分析了节点固有风险的影响因素和计算方法.根据节点之间故障传播概率得到边的作用强度和路径风险.对节点固有风险和路径风险进行分析，得到节点综合风险，并通过幂法对节点综合风险进行求解，从而识别部件对系统的影响程度.以转向架系统为例进行综合风险计算，结果表明：部件固有风险大小不能完全决定综合风险大小，还与部件连接关系和作用强度相关；与实际经验得出的关键部件综合风险排序对比，利用本文方法得到的关键部件排序一致性与其他方法相比有明显提升.     

Real-time model predictive control of connected electric vehicles

ABSTRACT

Electric Vehicles (EVs) motors develop high torque at low speeds, resulting in a high rate of acceleration with the added advantage of being fitted with smaller gearboxes. However, a rapid rise of torque in EVs fitted with central drive powertrains can create undesired torsional oscillations, which are influenced by wheel slip and flexibility in the halfshaft. These torsional oscillations in the halfshaft lead to longitudinal oscillations in the vehicle, thus creating problems with regard to comfort and drivability. The significance of using wheel slip in addition to halfshaft torsion for design of anti-jerk controllers for EVs has already been highlighted in our previous research. In this research, we have designed a look-ahead model predictive controller (LA-MPC) that calculates the required motor torque demand to meet the dual objectives of increased traction and anti-jerk control. The designed LA-MPC will improve drivability and energy consumption in connected EVs. The real-time capability of the LA-MPC has been demonstrated through hardware-in-the-loop experiments. The performance of the LA-MPC has been compared to other controllers presented in the literature. A validated high-fidelity longitudinal-dynamics model of the Rav4EV, which is the test vehicle of our research has been used to evaluate the controller.