Finite-difference simulation of green water impact on fixed and moving bodies

A numerical method was developed to predict the water impact pressure caused by green water phenomena. The density function method was employed in the framework of a locally refined overlapping grid system. The simple problem of a rectangular body placed in regular waves was considered and the simulation results were compared with tank experiments. Good agreement with experiment was shown for wave–body interactions and for the pressure values at three different positions on the body. The case of a rectangular body with a vertical wall on the deck was also considered and the comparison showed satisfactory agreement. It was demonstrated that this method could be extended to a moving body problem, in which the body was free to undergo heave, pitch, and surge motions.     

浅谈纯水制造设备的保固

纯水制造设备的连续优质供水对工厂的正常生产有着非常大的影响。本文首先简单介绍纯水制造设备的流程,然后对设备产生故障的原因进行分析。     

"友谊号"FPSO生产工艺流程改造

“友谊号”FPSO经过升级改造变成一艘具有原油开发综合处理功能的中心平台。文章分别介绍了该FPSO改装后的原油处理系统、污水处理系统、伴生气和天然气处理系统的工艺流程。     

Estimation of value of travel time reliability

In mode choice decision, travelers consider not only travel time but also reliability of its modes. In this paper, reliability was expressed in terms of standard deviation and maximum delay that were measured based on triangular distribution. In order to estimate value of time and value of reliability, the Multinomial and Nested Logit models were used. The analysis results revealed that reliability is an important factor affecting mode choice decisions. Elasticity is used to estimate the impacts of the different policies and system improvements for water transportation mode. Among these policies, decision maker can assess and select the best alternative by doing the benefit and cost analysis based on a new market share, the value of time, and the value of reliability. Finally, a set of promising policies and system improvement of the water transportation were proposed.     

On the fresh balance of the Adriatic Sea

The long-term mean fresh water balance of the Adriatic Sea is studied by ananalysing evaporation, precipitation and river runoff. Evaporation is computed from May latent heat flux and by means of bulk formula. In the latter case two wind speed data sets are used, namely those from the NMC and May. The sea surface temperature is taken from a historical Adriatic data set, and the air temperature and relative humidity come from the NMC data set. Two precipitation data sets are considered, namely the Legates and Willmott climatology and a data set consisting of data measured at 62 rain-gauge stations located on the Adriatic coasts. Runoff contribution to the fresh water balance is estimated from the long-term average flow rates of 39 rivers and the horizontal distribution of salinity in the upper mixed layer.The spatial distribution of the fresh water balance, as well as of its components, is analysed by means of monthly objective maps, from which averages and standard deviations are computed. The results obtained from the different computations are not always univocal, particularly in the evaluation of Summer evaporation, and are affected by relatively large statistical errors. Significant spatial and seasonal variability occurs, with a noticeable fresh water gain along the coastline of the northern and middle basins, while small areas of fresh water loss are found in the middle and southern basins. Nevertheless, on an annual basis, the difference between the fresh water losses by evaporation and the gains by precipitation and runoff is clearly negative, indicating that, unlike the whole Mediterranean, the Adriatic Sea is generally a dilution basin.     

铁路大型客站节水评价方法初探

在文献资料和现场调研的基础上,通过分析客站用水量影响因素,建立了单因素评价指标体系和评价方法;分析确定了各因素的权重,进行了无量纲化处理后,建立了多因素综合评价指标体系和评价方法,利用该方法对两个车站的节水效果进行了评价。     

共翼型舵特性及其对潜艇潜浮运动影响研究

共翼型舵是一种新型的潜艇组合舵翼操纵面.文章首先通过水洞试验和CFD计算对共翼型舵的敞水水动力性能进行了研究,结果表明,共翼型舵的舵效随弦长比和展弦比增大,封堵舵翼之间的间隙可以显著提高舵的水动力性能.随后通过CFD计算对比了分别安装有普通舵、共翼型舵和封堵缝隙的共翼型舵的潜艇的潜浮运动,结果显示,5°舵角时,安装共翼型舵和封堵缝隙的共翼型舵的潜艇模型潜浮角分别比安装普通舵的模型提高65％和105％左右.     

基于CFD的内河船深浅水中操纵性预报

由于岸壁效应和浅水效应,内河船舶在限制水域作操纵运动时通常受到比在开阔水域中更大的水动力.这些水动力对船舶操纵性具有不利影响,有可能导致船舶碰撞或触底等海上事故.因此,为了在船舶设计阶段预报其操纵性能,考虑浅水效应和岸壁效应以准确计算内河船舶操纵运动水动力非常重要.本文基于CFD方法,通过对粘性绕流进行数值模拟,对长江中营运的三艘内河船舶的操纵运动水动力进行计算.首先,为了验证数值方法的可靠性,对标模KVLCC2纯横荡和纯首摇试验的水动力进行计算,并将计算结果与现有的试验数据进行对比.然后,对三艘内河船舶在不同水深下的静舵试验、纯横荡和纯首摇试验进行数值模拟,计算得到水动力及相应的线性水动力导数.最后,基于计算得到的水动力导数,获得Nomoto模型中的操纵性参数,对比分析三艘内河船舶在深浅水中的操纵性能.结果表明,本文方法可以揭示不同水深下三艘内河船舶的操纵性变化趋势.该方法可为船舶设计阶段内河船舶深浅水中的操纵性预报提供一种实用的工具.     

双自由度舵机执行机构冲击载荷的仿真分析

超高速水下航行体航行过程中工况复杂,在加速段速度跨度大,双自由度舵机执行机构承受了较大的瞬态冲击载荷,有必要对其韧性进行分析校核。本文分别建立旋转机构输出轴、减速箱体和展开机构最后一级齿轮副的多刚体动力学仿真模型,分析各机构在冲击载荷下的应力和变形情况,校核结构韧性的可靠性,同时对旋转机构输出轴进行模态分析。仿真与校核结果为机构优化设计提供参考依据。