Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

Studies on emergency evacuation management for maritime transportation

Marine transportation is a vital component of the world’s economy and transportation network. The number of people using passenger ships around the globe is increasing worldwide. Similar to other transportation systems, passenger safety is critical in maritime shipment. As emergency evacuation processes for ships are highly different from and more complicated than those for buildings and other vehicles, many researchers have published a vast range of documents related to this peculiar research area. However, there is a tangible lack of sufficient literature review studies that investigate marine emergency evacuation (MEE). That being the case, the potential of marine transportation and the effect of emergency evacuation operation on life safety have inspired the proposal of this study. This paper offers a review of the available literature on MEE modelling, analysis and planning during the period from 1973 to 2017 using a systematic approach. After reviewing relevant academic journals, peer-reviewed conference papers, and technical reports of agencies, relevant literature is analysed. In addition, the literature review is extended by means of proposing a framework methodology which considers different possible conditions and situations during MEE. Finally, insights for ship managers and policymakers are discussed and potential future research directions are identified.     

散粮输送工艺设备分析

通过对散粮输送行业中常见的工艺设备进行探究,分析设备运行过程中可能存在的问题,提出合理的解决方案,为散粮系统工艺设计及工程运行提供重要参考意义。     

BIM技术在清华珠三角公建项目施工中的应用研究

随着科技的进步及项目管理水平的提高,BIM技术应运而生。本文以清华珠三角研究院粤港澳大湾区创新基地项目为依托,从应用目标、应用前准备工作、前期策划管理、技术管理、质量安全管理、物资设备管理、进度管理、经济成本管理等方面开展BIM技术在公建项目施工中的应用研究,结果表明:使用BIM技术,使项目管理走向精细化、全面化、高效化,并提高质量标准,增加安全保障,减少项目成本,提高项目利润率;同时与AI技术相结合,使BIM技术更加具有简便性,产出更大效益。     

船舶甲板智能抛丸机器人设计

为解决在船舶外场涂装阶段除锈和拉毛施工效率低、质量不稳定、环境污染严重等问题,设计一款用于船舶甲板的智能抛丸机器人。简介该型机器人系统组成,阐述其抛丸分系统、除尘分系统和越障辅助机构的硬件设计及其软件设计,并设计手动遥控和自主导引操作方式。实船测试结果表明,该型机器人可满足船舶甲板除锈清理的工作要求。     

复杂城市环境泥水盾构泥浆绿色处理技术分析

泥水平衡盾构法修建隧道,在施工阶段会产生大量的废浆,如果废浆没有得到科学、妥善的处理,对环境的污染是无法估计的。本文以新建京张高铁清华园隧道工程为依托,结合在城市复杂繁华地区施工场地狭小、泥浆处理难度大等工程难题,对盾构掘进产生的废弃泥浆绿色处理技术进行了适应性研究,分析了综合处理之后泥浆循环利用的应用效果。泥水处理设备、压滤设备及离心设备相结合的泥浆综合处理技术,有效地实现了盾构施工"零排放",为今后类似施工条件的工程提供了技术参考。     

面向生产管理信息化的涂装智能设计系统

研究分析涂装设计工艺流程、涂装生产管理流程及涂装机器人工艺参数，整理分析涂装工艺数据、生产管理信息和涂装机器人的工艺特征，对这些数据进行整理归纳，理清他们之间的逻辑关系，形成数据接口，通过数据库系统完成涂装规范化设计和生产管理以及涂装机器人的对接。     

集美大学教学实习船“育德”轮总体设计

"育德"轮是上海船舶研究设计院为集美大学设计的用于航海专业教学实习、科学研究兼顾货物运输的教学实习船。该船是目前世界吨位最大的教学实习船,配备了功能齐全的教学设施、先进的科研设备以及舒适的学习生活环境。该船还具有安全性高、绿色环保和经济性优异等特点。     

两种响应型船舶运动模型的对比及适用性分析

船舶运动模型作为自动舵性能检测平台的基础与核心，对于自动舵的研发、调试及船舶运动控制算法的设计都有非常重要的意义。现有的航迹航向自动舵检测平台普遍使用简化的一阶线性KT方程。由于忽略船舶回转运动中的纵向速度变化以及首摇角与横向速度之间的耦合，在实际使用中具有一定的局限性。本文引用国际电工委员会制定的航迹自动舵标准（ IEC62065）中提出的船舶运动模型，并对其进行仿真，将仿真结果与一阶线性KT方程的仿真结果进行对比分析，讨论一阶线性KT方程的适用范围。同时介绍改进的一阶非线性KT方程的形式并进行仿真试验，结果表明其与 IEC62065中非线性模型相似度较好，且减少了计算量。     

卡西姆港燃煤应急电站卸煤码头港池水域平面布置优化

针对复杂水域条件下大型散货码头的水域平面布置,基于卡西姆燃煤应急电站码头工程项目,根据对周边已建工程、红树林以及水动力等主要影响因素的深入分析提出初步平面方案,并通过船舶操纵模拟试验对平面布置及相关尺度进行优化,合理确定本工程平面布置方案。结果表明,本工程的建设对周边影响较小,水域尺度能够满足船舶通航及靠离泊要求,水域平面布置合理。