某航道桥下部结构受船舶撞击后安全性能评估及修复

为评估航道桥下部结构的船撞安全性,以遭受船撞的某内河航道桥为研究对象,采用有限元方法和相关规范计算受撞击的5号桥墩自身水平抗力、船撞力、墩顶位移,并从墩顶位移和桥墩抗力两方面对受撞桥墩的安全性进行评估。结果表明:5号桥墩的横桥向和顺桥向抗力均由桩基强度控制,分别为2528 kN和1142 kN;事故船撞击工况下,墩顶最大横桥向和顺桥向位移分别为7.6 mm、13.4 mm,满足位移限值要求;沿横桥向和顺桥向的船撞安全系数分别为1.67和0.94,顺桥向的自身抗力不足以抵抗瞬时船撞力,导致桥墩桩基础受损,建议采用增大截面法对受损桩基础进行加固补强,并设置独立防撞墩以保障桥梁结构安全。基于分析过程,总结了桥梁下部结构船撞安全评估的一般流程。     

船舶航向模糊控制系统的设计

提出了一种改进的船舶航向模糊控制方法,将航向改变模糊控制器和航向保持模糊控制器有机地结合起来,同时在航向保持模糊控制器的输出端叠加了一个积分作用,提高了航向保持过程中的静态精度。仿真结果表明,无论是在静水环境中还是在不同风和流干扰的环境中,这种改进的航向模糊控制器都比常规的模糊控制器具有更好的控制效果,能够满足船舶航向实时控制的要求。     

加快船舶配套产品的发展

船舶工业的发展离不开船舶配套工业的发展,"十一五"期间我国要实现优势产品的生产能力大幅提升,自主研发取得一定突破,基本掌握重点产品关键制造技术,本土化生产率达60%以上,但本土化不是国产化,更不是有自主品牌自主知识产权的国产化产品,应在引进消化吸收后更注意技术创新,在有条件的配套产品中率先加快配套的国产化进程.     

Ultimate strength of container ships subjected to combined hogging moment and bottom local loads part 1: Nonlinear finite element analysis

This paper is the first of two companion papers concerning the ultimate hull girder strength of container ships subjected to combined hogging moment and bottom local loads. In the midship part of container ships, upward bottom local loads are usually larger than the downward ones. This leads to the increase of biaxial compression in the outer bottom plating and the reduction of the ultimate hull girder strength in the hogging condition. In this Part 1, the collapse behavior and ultimate strength of container ships under combined hogging moment and bottom local loads are analyzed using nonlinear finite element method. Buckling collapse behavior of bottom stiffened panels during the progressive collapse of a hull girder is closely investigated. It has been found that major factors of the reduction of ultimate hogging strength due to bottom local loads are (1) the increase of the longitudinal compression in the outer bottom and (2) the reduction of the effectiveness of the inner bottom, which is on the tension side of local bending of the double bottom. The obtained results will be utilized in the Part 2 paper to develop a simplified method of progressive collapse analysis of container ships under combined hogging moment and bottom local loads.     

一种无底坑、无顶层高度的船用升降机实现方法

船用环境下,由于升降机的井道空间(包括底坑深度、顶层高度)资源紧张,导致物流输送任务路径受限制。为了提高井道空间利用率,可采用直线电动机强制驱动,并通过分段提升的方式,实现井道无底坑、无顶层高度的布置需求。文章分析了无底坑、无顶层高度的船用升降机的需求,介绍了实现方法和关键技术,并制造原理样机加以验证。     

37 500 m3 LEG船液罐吊装精度数字仿真分析

以37500 m³液化乙烯气(Liquefied Ethylene Gas,LEG)船货舱区液罐吊装为研究对象,对液罐吊装前的干涉检查和数据匹配等工作进行梳理,建立一套完整的液罐吊装模拟匹配流程,并对实际吊装过程出现的问题提出解决方案,旨在为后续同类大型液罐的吊装提供参考、积累经验。     

12000 t抬浮力打捞工程船电力系统

针对12000t抬浮力打捞工程船,在概括介绍其船型特点的同时,对其电力系统以及在系统设计时需要注意的一些问题进行了详细描述,为同类电力系统设计提供参考.     

乌江思林和沙沱升船机船舶超吃水可行性研究

针对乌江思林、沙沱两座升船机船舶1.6 m吃水控制标准导致载货量偏低的实际问题,开展超吃水船舶进出升船机船厢系统性的实船试验,论证船舶吃水标准提升的可行性。结果表明,船舶出厢为控制性工况,2.0 m吃水船舶正常出厢实测最大下沉量16.46 cm,富余水深大于30 cm;基于实船试验数据改进的下沉量预测公式,将船舶实际下沉量预测精度提高1倍以上;按目前2座升船机运行水位协调机制,上下游水位变化在10 cm以内,船舶最大吃水提升至2.0 m是可行的。建议在运行中按照1.8~2.0 m吃水逐步放宽控制标准。     

铝合金在邮轮主船体结构上的应用分析

基于铝合金与钢结构“等强、等刚、等稳定性”的理论和有限元计算方法的分析,对某邮轮主体结构进行替代等效分析,论证了铝合金结构的安全性、经济性以及可能性,为铝合金在邮轮主船体结构的应用和直接计算方法提供建议和参考。     

Valuation mismatch and shipping q indicator for shipping asset management

ABSTRACT

This paper aims to develop an adaptation of the Tobin Q investment model for the shipping asset management in order to monitor valuation mismatch and bubble pricing of shipping assets. In this circumstance, the market prices of various shipping assets (e.g., Capesize or Panamax dry bulk carriers in different age profiles) are compared to the measured long-term asset value with second-hand ship prices. The mark-to-market prices of shipping assets are led by current market trends and freight rates, while the long-term asset value is estimated by using past data under certain assumptions (mean reversion, trend reversion). The discrepancy between market prices and the long-term nominal value of a shipping asset reflects any mispricing, which in turn sheds light on investment timing and market entry-exit decision.