超早强修补水泥混凝土早强机理研究

通过室内试验测试并分析了修补混凝土强度增长、收缩特性、新旧混凝土粘结强度等技术性能,并采用热重分析探讨了混凝土早强机理。结果表明,超早强系列修补混凝土能够满足6h通车要求,并且具有早期强度高、后期强度增长稳定无衰减、干缩及温缩性好、新旧断面粘结强度高等优点;差热分析表明,修补剂的加入减少了氢氧化钙晶体数量,提高了修补混凝土的早期强度。最终试验路的4年成功应用验证了室内研究成果。     

环氧沥青在大跨径钢桥面粘结层中的应用研究

粘结层材料和施工技术是大跨径钢桥面铺装的关键技术之一。根据某公路大桥桥面铺装粘结层的设计过程和特性，提出了环氧沥青粘结层的设计方法。     

桑塔纳汽车后桥强度有限元分析及改进方案

根据桑塔纳2000汽车后桥的实际结构，利用通用有限元软件ANSYS，对后桥进行了弹塑性静态结构有限元分析。主要研究了结构焊接处强度、横梁破坏处在半个周期载荷波内应力状态变化；给出了在最大剪应变幅平面上，影响疲劳强度及寿命的基本参量的计算结果；提出了提高后桥强度的改进方案。     

水泥、乳化沥青及其用量对水泥-乳化沥青混合料性能的影响

通过对结合料为乳化沥青、水泥乳化沥青以及水泥的混合料进行马歇尔稳定度试验、劈裂强度试验以及抗压强度试验,分析了混合料为这3种结合料的情况下各自的强度增长规律和力学特性,得出了水泥乳化沥青复合结合料具有很强的优越性.     

填石路堤原位抗剪试验研究

在路堤原位抗剪试验基础上，获取路堤原位抗剪强度指标内摩擦角φ和黏聚力C，以推滑平衡分析法为理论基础，提出4点基本假设，经过现场试验数据计算分析，论证了假设成立和推滑平衡分析法应用于填石路堤的正确性。     

连云港海相软土基本特性与处理方法探讨

根据连云港地区多条高速公路工程的地质资料,并与我国部分沿海地区软土进行对比,分析连云港海相软土的基本物理力学指标统计特征、抗剪强度特性、固结变形特性以及蠕变特性,并介绍了适合于该海相软土的主要地基处理措施。     

岩土锚固力的确定及应用

选定粤赣高速公路有代表性的6种岩层,对其全、强、弱风化层组成的路堑高边坡锚索加固工程进行了69次破坏性拉拔试验。试验中对每种不同风化程度的岩(土)层采用锚固长度为1m、2m、3m的现场拉拔试验,计算出锚索加固边坡的锚固力值,为验证高边坡工程设计提供了准确的力学参数,也为全线高边坡工程的施工工艺提供指导性意见。同时,节省了大量的试验费用和时间,获得了显著的经济效益。     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

Tuning of transfer functions for analysis of wave–ship interactions

Transfer functions are often used together with a wave spectrum for analysis of wave–ship interactions, where one application addresses the prediction of wave-induced motions or other types of global responses. This paper presents a simple and practical method which can be used to tune the transfer function of such responses to facilitate improved prediction capability. The input to the method consists of a measured response, i.e. time series sequences from a given sensor, the 2D wave spectrum characterising the seaway in which the measurements are taken, and an initial estimate of the transfer function for the response in study. The paper presents results obtained using data from an in-service container ship. The 2D wave spectra are taken from the ERA5 database, while the transfer function is computed by a simple closed-form expression. The paper shows that the application of the tuned transfer function leads to predictions which are significantly improved compared to using the transfer function without tuning.     

基于ANN的船舶撞击高桩码头群桩损伤位置预测

本文采用有限元软件ABAQUS建立了船舶撞击高桩码头群桩的空间有限元模型。通过计算评估了撞击力、桩体刚度、撞击位置和撞击角度下对群桩结构损伤位置的影响。基于人工神经网络(ANN)方法,对不同参数组合下的群桩结构损伤位置进行了预测,并对ANN方法的可行性进行了评估。