Including congestion effects in urban road traffic CO2 emissions modelling: Do Local Government Authorities have the right options?

Tailpipe emissions from vehicles on urban road networks have damaging impacts, with the problem exacerbated by the common occurrence of congestion. This article focuses on carbon dioxide because it is the largest constituent of road traffic greenhouse gas emissions. Local Government Authorities (LGAs) are typically responsible for facilitating mitigation of these emissions, and critical to this task is the ability to assess the impact of transport interventions on road traffic emissions for a whole network.This article presents a contemporary review of literature concerning road traffic data and its use by LGAs in emissions models (EMs). Emphasis on the practicalities of using data readily available to LGAs to estimate network level emissions and inform effective policy is a relatively new research area, and this article summarises achievements so far. Results of the literature review indicate that readily available data are aggregated at traffic level rather than disaggregated at individual vehicle level. Hence, a hypothesis is put forward that optimal EM complexity is one using traffic variables as inputs, allowing LGAs to capture the influence of congestion whilst avoiding the complexity of detailed EMs that estimate emissions at vehicle level.Existing methodologies for estimating network emissions based on traffic variables typically have limitations. Conclusions are that LGAs do not necessarily have the right options, and that more research in this domain is required, both to quantify accuracy and to further develop EMs that explicitly include congestion, whilst remaining within LGA resource constraints.     

卡西姆港燃煤应急电站卸煤码头港池水域平面布置优化

针对复杂水域条件下大型散货码头的水域平面布置,基于卡西姆燃煤应急电站码头工程项目,根据对周边已建工程、红树林以及水动力等主要影响因素的深入分析提出初步平面方案,并通过船舶操纵模拟试验对平面布置及相关尺度进行优化,合理确定本工程平面布置方案。结果表明,本工程的建设对周边影响较小,水域尺度能够满足船舶通航及靠离泊要求,水域平面布置合理。     

LNG码头应急通道与应急锚地研究

本文针对LNG应急逃离情况以及国内LNG应急锚地使用现状,总结分析国内、外LNG应急锚地布置情况;结合江苏滨海LNG码头通航条件,提出LNG应急通道及应急锚地三种布置方案,通过操船模拟试验论证比选并得出结论,供类似工程参考。     

船舶电缆自动化敷设系统设计与实现

在船舶电缆敷设过程中,很难借助有效的工装提高劳动效率,低空间的高强度作业存在严重的安全风险。以船舶电缆自动化敷设系统为分析对象,介绍系统组成和系统接口,采用比例积分微分(Proportion Integration Differentiation,PID)算法计算系统行程,通过PROFINET总线完成数据传输,以人机界面(Human Machine Interface,HMI)实现系统性能要求。在风电安装平台上的实际运用表明,该系统可解决造船行业劳动力成本高和安全风险大的问题。     

考虑移步需求的无桩型共享单车动态调度研究

共享单车系统自发的不均衡性导致单车数量分布与用户需求分布之间产生偏移，降低了系统服务能力，需要调度实现再平衡. 现有动态调度算法缺乏考虑起点车辆供给不足，用户在出行过程中“再次”取车的移步需求，难以准确识别用户真实的出行需求分布，降低了调度效果. 本文提出以用户出行选择行为为下层，以调度车辆路径规划为上层的双层规划模型框架，设计结合仿真系统的启发式求解算法. 算例场景基于上海市虹口、杨浦区共享单车历史出行数据搭建，并进行网格化处理. 算例结果表明，模型能有效识别移步需求，提高共享单车的供需匹配能力. 针对各类调度资源配置情况，共享单车的供需匹配率提升18.07%~ 19.89%，提高了共享单车系统的管理效率.     

考虑游览船运营特征的航道通过能力评价方法

为构建客货船舶协同动态运行控制技术体系，以经典航道通过能力模型为基础，构建基于游览船运营特征(发船高峰性和航线集中度)的航道通过能力模型.根据黄浦江游览核心区船舶自动识别系统(AIS)数据，对所提出的航道通过能力模型进行实证分析.研究结果表明，本文航道通过能力模型能够较为准确地评价研究区域的实际航道通过能力.游览船发船高峰时期与现有航线规划条件下，黄浦江游览核心区航道通过能力(76艘/h)趋近饱和状态；当过境船到达超过69艘/h时，建议海事相关部门采取“错峰”航行等相关政策.     

Modeling the impacts of mandatory and discretionary lane-changing maneuvers

In this paper, a novel mesoscopic multilane model is proposed to enable simultaneous simulation of mandatory and discretionary lane-changing behaviors to realistically capture multilane traffic dynamics. The model considers lane specific fundamental diagrams to simulate dynamic heterogeneous lane flow distributions on expressways. Moreover, different priority levels are identified according to different lane-changing motivations and the corresponding levels of urgency. Then, an algorithm is proposed to estimate the dynamic mandatory and discretionary lane-changing demands. Finally, the lane flow propagation is defined by the reaction law of the demand–supply functions, which can be regarded as an extension of the Incremental-Transfer and/or Priority Incremental-Transfer principles. The proposed mesoscopic multilane cell transmission model is calibrated and validated on a complex weaving section of the State Route 241 freeway in Orange County, California, showing both the positive and negative impact of lane changing maneuvers, e.g., balancing effect and capacity drop, respectively. Moreover, the empirical study verifies that the model requires no additional data other than the cell transmission model does. Thus, the proposed model can be deployed as a simple simulation tool for accessing dynamic mesoscopic multilane traffic state from data available to most management centers, and also the potential application in predicting the impact of traffic incident or lane control strategy.     

Heterogeneous hazard model of PEV users charging intervals: Analysis of four year charging transactions data

Public charging infrastructure represents a key success factor in the promotion of plug-in electric vehicles (PEV). Given that a large initial investment is required for the widespread adoption of PEV, many studies have addressed the location choice problem for charging infrastructure using a priori simple assumptions. Ideally, however, identifying optimal locations of charging stations necessitates an understanding of charging behavior. Limited market penetration of PEV makes it difficult to grasp any regularities in charging behavior. Using a Dutch data set about four-years of charging transactions, this study presents a detailed analysis of inter-charging times. Recognizing that PEV users may exhibit different charging behavior, this study estimates a latent class hazard duration model, which accommodates duration dependence, unobserved heterogeneity and the effects of time-varying covariates. PEV users are endogenously classified into regular and random users by treating charging regularity as a latent variable. The paper provides valuable insights into the dynamics of charging behavior at public charging stations, and which strategies can be successfully used to improve the performance of public charging infrastructure.     

Evaluating sustainability of supply chains by two-stage range directional measure in the presence of negative data

Assessing sustainability of supply chains is a critical and increasingly complex problem. In recent years sustainability has received more attention in supply chain management (SCM) literature with triple bottom lines including social, environmental, and economic factors. Conventional data envelopment analysis (DEA) models consider decision making units (DMUs) as black boxes that consume a set of inputs to produce a set of outputs and do not take into consideration internal interactions of DMUs. Two-stage DEA models deal with such DMUs. However, existing two-stage DEA models are applicable only in technologies characterized by positive inputs/outputs. This paper aims to build and present a new two-stage DEA model considering negative input-intermediate-output data. Some numerical examples along with some theorems and properties are given to show capability of proposed method. The proposed ideas are used in a case study where 29 Iranian supply chains producing equipment of expendable medical devices are evaluated in terms of sustainability.