分段线性变参数控制在数字式自动找平控制系统中的应用

为了验证分段线性变参数控制在自动找平控制系统中的应用前景,对自动找平控制系统的结构、控制方式进行了介绍;分析了分段线性控制方式的工作原理及特点,在实验室建立了沥青混凝土摊铺机数字式自动找平控制系统试验台,设计了3套试验方案,即普通电磁阀方案、高速开关阀方案和分段线性控制方案;对这3种控制方案进行了试验比较,得出了在阶跃干扰作用下,3种控制方案的响应速度及产生超调时的超调量。结果表明:分段线性控制方案具有较快的响应速度,但在系统产生超调时,其超调量相对较大。     

水泥粉煤灰稳定碎石基层的龄期和强度

以水泥粉煤灰稳定碎石混合料的设计龄期和设计参数为研究对象,通过试验不同龄期的力学特性指标发现,120d龄期时混合料的强度发展已经基本完成,因此认定混合料的设计龄期宜为120d。在此基础上,通过变化集料级配和水泥剂量,研究确定出混合料7d龄期的抗压强度标准,120d龄期劈裂强度和抗压回弹模量的合理区间。     

钱江四桥抗震性能分析

根据钱江四桥地震危险性分析得到的地震动参数,基于两水准设防、两阶段设计的抗震设计思想,采用反应谱和时程分析两种方法对该桥的抗震性能进行了比较分析,分析时考虑了桩-土的相互作用及材料、伸缩缝、支座等非线形效应影响。研究结果表明:钱江四桥的抗震性能满足预期的设计性能目标,不会因地震而破坏。     

FSQ6125客车设计

简要介绍FSQ6125客车的设计目的、整车造型、主要结构特点和技术参数。     

新疆公路三级区划中环境参数的提出

自然环境条件对公路工程的影响，主要体现在路线选取、路基强度和稳定性、路面稳定性和耐久性、公路主要自然病害(包括冻融、翻浆、雪害、风沙害、崩塌、滑坡和地震灾害等)、施工条件和养护运营环境等5个方面，分析自然条件和公路工程的关系，提出公路区划中地质地貌环境参数和水热状况环境参数。阐述了环境参数的提出过程，为新疆公路自然区划三级区的划分提供依据。     

Tuning of transfer functions for analysis of wave–ship interactions

Transfer functions are often used together with a wave spectrum for analysis of wave–ship interactions, where one application addresses the prediction of wave-induced motions or other types of global responses. This paper presents a simple and practical method which can be used to tune the transfer function of such responses to facilitate improved prediction capability. The input to the method consists of a measured response, i.e. time series sequences from a given sensor, the 2D wave spectrum characterising the seaway in which the measurements are taken, and an initial estimate of the transfer function for the response in study. The paper presents results obtained using data from an in-service container ship. The 2D wave spectra are taken from the ERA5 database, while the transfer function is computed by a simple closed-form expression. The paper shows that the application of the tuned transfer function leads to predictions which are significantly improved compared to using the transfer function without tuning.     

基于ANN的船舶撞击高桩码头群桩损伤位置预测

本文采用有限元软件ABAQUS建立了船舶撞击高桩码头群桩的空间有限元模型。通过计算评估了撞击力、桩体刚度、撞击位置和撞击角度下对群桩结构损伤位置的影响。基于人工神经网络(ANN)方法,对不同参数组合下的群桩结构损伤位置进行了预测,并对ANN方法的可行性进行了评估。     

考虑横向漂移的船舶路径跟踪自抗扰控制

针对船舶运动系统中内部动态不确定和外部干扰等问题,进行了欠驱动船舶路径跟踪的自抗扰方法研究。利用Backstepping设计参考航向角,并通过线性扩张状态观测器对流干扰和横向运动引起的横向漂移进行估计。其次,根据自抗扰算法对航向进行控制,采用线性扩张状态观测器对外界干扰及内部不确定项进行估计。最后仿真结果表明,在风流干扰下所设计的控制器仍能使船准确地跟踪上参考路径,验证了所提控制方案的有效性。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

Studies on emergency evacuation management for maritime transportation

Marine transportation is a vital component of the world’s economy and transportation network. The number of people using passenger ships around the globe is increasing worldwide. Similar to other transportation systems, passenger safety is critical in maritime shipment. As emergency evacuation processes for ships are highly different from and more complicated than those for buildings and other vehicles, many researchers have published a vast range of documents related to this peculiar research area. However, there is a tangible lack of sufficient literature review studies that investigate marine emergency evacuation (MEE). That being the case, the potential of marine transportation and the effect of emergency evacuation operation on life safety have inspired the proposal of this study. This paper offers a review of the available literature on MEE modelling, analysis and planning during the period from 1973 to 2017 using a systematic approach. After reviewing relevant academic journals, peer-reviewed conference papers, and technical reports of agencies, relevant literature is analysed. In addition, the literature review is extended by means of proposing a framework methodology which considers different possible conditions and situations during MEE. Finally, insights for ship managers and policymakers are discussed and potential future research directions are identified.