关键航段江海直达船舶驾驶技术探讨

此文通过对江海直达船舶的操纵性分析,从过弯曲河段航法、过桥航法、入海河口的航法三方面对关键航段江海直达船舶驾驶技术进行了探讨。     

机舱油水分离设备的营运检验

船舶舱底水对海洋环境的污染、船舶油水分离器的工作效果直接关系到是否满足MARPOL73/78公约的要求。通过对营运船舶油水分离器的检验方法,保证船舶油水分离器的工作效果。     

城市轨道交通车辆部件故障与均衡修修程周期

简要分析了目前采用的城市轨道交通车辆维修制度及修程的不足,引出均衡修概念。基于概率统计分析,结合车门等车辆零部件的故障间隔时间特点,提出确定均衡修修程周期的方法,指出均衡修策略的技术特征。实施均衡修应以部件为维修单元。分析表明,采用均衡修将减少零部件故障,提升车辆运用可靠性。     

船长文献——澳大利亚Cape Flattery港进港指南与靠泊操作要点

澳大利亚Cape Flattery港情况特殊,无拖船协助,给靠、离泊带来许多困难。总结了长期航行于此港至东亚航线的经验和体会,供航海人员参考。     

地下防渗墙快速无损检测技术研究

通过对防渗墙的成墙机理与防渗墙和周围介质存在的物性差异入手，从技术背景、技术原理和适用情况等方面分析研究了适合地下防渗墙质量检测的技术。运用探地雷达、高密度电法和瑞雷面波法三种方法对分沂入沭的堤防防渗墙进行现场检测，从不同检测技术得出的资料数据分析了防渗墙存在的质量问题，并与钻孔取芯的实际检测结果比对分析。对三种探测技术进行了综合评价，得到了适合防渗墙快速无损检测的技术，即利用探地雷达和高密度电法进行防渗墙的快速无损检测，其检测的结果是有效和准确的。     

支持协同设计的船舶设计过程模型研究

船舶设计过程模型是在网络环境下开展船舶并行和协同设计系统的基础.本文根据船舶设计的特点,提出了将船舶设计过程按照项目、设计任务和设计活动三个层次进行分解的方法,并给出了船舶设计过程模型形式化定义.该模型明确了设计任务间的并行、顺序和协同关系,可以直接按设计任务构成活动网络图进行规划、分析、管理等工作,使设计过程具有良好的可变更性和可控性.     

Dynamics of ships running aground

A comprehensive dynamic model is presented for analysis of the transient loads and responses of the hull girder of ships running aground on relatively plane sand, gravel, or rock sea bottoms. Depending on the seabed soil characteristics and the geometry of the ship bow, the bow will plow into the seabed to some extent. The soil forces are determined by a mathematical model based on a theory for frictional soils in rupture and dynamic equilibrium of the fluid phase in the saturated soil. The hydrodynamic pressure forces acting on the decelerated ship hull are determined by taking into account the effect of shallow water. Hydrodynamic memory effects on the transient hull motions are modeled by application of an impulse response technique. The ship hull is modeled as an elastic beam to determine the structural response in the form of flexural and longitudinal stress waves caused by the transient ground reaction and hydrodynamic forces. A number of numerical analysis results are presented for a VLCC running aground. The results include bow trajectory in the seabed, time variation of the grounding force, and the maximum values of the sectional shear forces and bending moments in the hull girder.     

800m^3开体式耙吸挖泥船

开体式耙吸挖泥船是一种新型工程船。本文主要介绍我国第一艘延寿地设计研制的８００ｍ＾３开体式耙吸挖泥船的设计思想和总体结构。     

Reliability-based calibration of fatigue design guidelines for ship structures

A simple reliability-based framework is applied to calibrate a new set of fatigue design guidelines. This new guideline considers two different approaches for the assessment of both loads, stresses and local stress raising effects, and partial safety factors must be given for any combination of these approaches. For the calibration, the lognormal reliability format is adopted because the hereby-derived partial safety factors can be combined arbitrarily. This means that with a few basic partial safety factors, the combination of partial safety factors to be applied together with any combination of calculation approaches can be determined easily. In the present paper both the adopted reliability format, the applied modeling of uncertainties and the selected target safety index are explained. Based on this, a new guideline is calibrated and the derived partial safety factors are presented. Finally, the new guideline is applied through a numerical example in order to show the applicability of the calibrated partial safety factors, and satisfactory results are found.     

Mobile phone use while driving: public opinions on restrictions

This paper reviews two road-user surveys on the use of mobile phones on the road in Finland where the mobile phone ownership rate is highest in the world (70% in August 2000). From 1998 to 1999 the proportion of drivers that chose to use a mobile phone while driving rose from 56% to 68%, while the proportion of phone using drivers who experienced dangerous situations due to phone use rose from 44% to 50%. The proportion of drivers who used their phones in some way to benefit safety on the road remained at about 55%. The youngest, novice drivers had the highest level of phone usage of all age categories. Over 48% of the interviewees believed that the government should ban the use of hand-held mobile phones while driving, and another 27% believed that all types of mobile phone use should be banned while driving. Those drivers who used their phones the most each day were more likely to want some form of restrictions, than those who had lower usage. This is a strong message to the elected lawmakers and raises the problem of exactly how regulatory bodies would go about controlling the future growth of new driver support and non-driving related communication devices in road vehicles. It was concluded that legislating for hands-free use only would be a reasonable course of action. Mandating that the current generation of equipment should be optimized for hands-free use should result in future generations of in-vehicle equipment also being optimized for hands-free use as a minimum criterion.