水力式升船机平衡重波动机理

水力式升船机是一种新型的通航建筑物,它完全利用水的浮力来驱动承船厢运行,与传统形式升船机相比具有十分明显的优越性。设计并建立了水力式升船机单竖井概化物理模型,初步探讨影响水力式升船机运行稳定性的主要因素,对比不同试验工况下竖井水力学特性及平衡重波动等特性。结果显示:竖井与平衡重间隙比为0.061时,在一定范围内增大流量对平衡重上升过程波动几乎没有影响,且平衡重上升过程相对稳定。     

水力式升船机竖井内水体的振动分析

地震荷载下升船机系统内水体与浮筒间的耦合作用是影响升船机安全运行的一个难题。通过流体动力学模拟(CFD)方法,讨论在不同频率的正弦激励下升船机竖井内水体的振荡。结果表明:竖井的水体存在一个自振频率,此频率比相同径度、相同水深的矩形池的值大约10%,自振周期约为0.42s;竖井水体的自振频率基本不随高度变化。     

太阳能光伏电力系统在800PCC滚装船上的应用研究

为使船舶达到绿色、环保的要求,并解决能源紧缺问题,在船上广泛应用太阳能是一种有效途径。介绍太阳能在船上应用的现状和相关规范对太阳能在船上应用的规定。分析在800PCC滚装船上应用太阳能的优势,给出该船的基本参数和航线,结合这些基本信息分析该船太阳能光伏电力系统的结构和运行模式。通过研究总结出该船应用太阳能可带来能效指数提高的积极效应。     

45000t集装箱滚装船水密门精度控制

为更好地控制集装箱滚装船门框结构的安装精度,以45000t集装箱滚装船中只包含水密门结构的分段为例进行水密门精度控制研究。通过研究该分段的建造方式,改进分段的建造工艺,合理安排门框结构在分段建造过程中的安装顺序,进而缩减结构变形;同时,利用精度测量仪器进行跟踪测量,保证始终把精度控制在有效范围内。对焊接过程中采用的焊接方法进行研究,改进焊接工艺,采取逐步退焊法控制焊接热量,进而减少焊接变形。通过对分段水密门门框结构的安装工艺及焊接工艺进行研究,将理论与实践相结合,总结出一套行之有效的建造工艺,确保分段门框结构安装精度得到有效控制,保证水密门的性能,为该系列船后续的分段建造提供参考。     

重载情况下船舶及主机加速问题分析

针对目前一些船舶在恶劣海况下遇到的加速问题,以及通过转速禁区时间过长的问题,从螺旋桨匹配和主机内部设计两方面进行原因分析。围绕转速禁区功率裕度,结合相关案例,从轻螺旋桨裕度、转速禁区及MAN主机输出扭矩能力等方面入手,提出改进措施。     

The use of gait parameters to evaluate pedestrian behavior at scramble phase signalized intersections

Pedestrian scramble phasing is usually implemented to reduce pedestrian‐vehicle conflicts and therefore increase the safety of the intersection. However, to adequately determine the benefits of scramble phasing, it is necessary to understand how pedestrians react to such an unconventional design. This study investigates changes in pedestrian crossing behavior following the implementation of a scramble phase by examining the spatiotemporal gait parameters (step length and step frequency). This detailed microscopic‐level analysis provides insight into changes in pedestrian walking mechanisms as well as the effect of various pedestrian and intersection characteristics. The study uses video data collected at a scramble phase signalized intersection in Oakland, California. Gait parameters were found to be influenced by pedestrian gender, age, group size, crosswalk length, and pedestrian signal indications. Both average step length and walking speed were significantly higher for diagonally crossing pedestrians compared with pedestrians crossing on the conventional crosswalks. Pedestrians were found to have the tendency to increase their step length more than their step frequency to increase walking speed. It was also found that, compared with men, women generally increase their walking speed by increasing their step frequency more than step length. However, when in non‐compliance with signal indications, women increase their walking speed by increasing their step length more than step frequency. It was also found that older pedestrians do not significantly change their walking behavior when in non‐compliance with signal indications. Copyright © 2014 John Wiley & Sons, Ltd.     

A comparison of modelled and real-life driving profiles for the simulation of railway vehicle operation

A key factor in determining the performance of a railway system is the speed profile of the trains within the network. There can be significant variation in this speed profile for identical trains on identical routes, depending on how the train is driven. A better understanding and control of speed profiles can therefore offer significant potential for improvements in the performance of railway systems. This paper develops a model to allow the variability of real-life driving profiles of railway vehicles to be quantitatively described and predicted, in order to better account for the effects on the speed profile of the train and hence the performance of the railway network as a whole. The model is validated against data from the Tyne and Wear Metro, and replicates the measured data to a good degree of accuracy.     

照明长度和亮度随车速变化的隧道照明智能控制系统研究

随着我国交通运输业日益发达,越来越多的公路隧道投入运营,其安全性和运营成本之间的矛盾也越来越受到关注,如何在保证隧道运营安全的前提下,尽可能的降低运营成本成为亟待解决的难题。本文从隧道照明安全节能的角度出发,提出一种根据车速改变加强照明区段长度的隧道照明控制系统,满足照明质量的同时进行隧道的"按需照明"。系统将车速信息分为50 km/h以下、50~70 km/h、70~90 km/h、90 km/h以上四个速度区段,每个速度区段设计不同的加强照明区段长度;通过电感式线圈检测进入隧道的车辆速度作为控制输入参数,控制相应区段进行照明。     

典型航线船舶排放清单及排放特征研究

文章分析了我国典型航线典型船舶排放特征,以船舶自动识别系统数据为基础,收集整理所选研究船舶排放参数,结合船舶实际航行资料,采用动力法估算了秦皇岛港—广州港航线某散货船一个航行周期的排放清单,并分析了靠港、停泊、港内机动、巡航4个船舶状态下的排放特征,绘制了2 km×2 km分辨率的空间排放特征图。结果表明,该典型航线上典型散货船舶一个航行周期排放的SOx、NOx、PM10、PM2.5总量分别为18.88吨、30.87吨、1.85吨和1.69吨。排放源分析表明从在船舶的主机、辅机和锅炉3种排放源中,主机是主要排放源。航行状态上巡航工况排放量最大;船舶排放污染物的空间分析表明,船舶在进出港口区域是污染物排放最密集的区域。     

Evaluating the effects of green port policy: Case study of Kaohsiung harbor in Taiwan

The paper evaluates the effectiveness of strategies designed to reduce these pollutants in port areas, based on a newly developed assessment model to calculate emissions. The case study found that the strategy of reducing the ship’s speed to 12 knots is most effective in cutting fuel consumption and costs, as well as emissions. Adopting an onshore power supply system could reduce CO₂ emission by 57.16% and PM by 39.4%. By adopting the strategies of both reduced speed and cold ironing emissions control, a reduction in emissions of 71% to 91% can be achieved with a 20 nautical mile reduced speed zone. Therefore, the goals of reductions in emissions to improve port areas air quality could be achieved through adopting a green port policy in the future.