某型350MVA短路试验发电机试验系统突然短路的研究

通过对350MVA短路试验发电机试验系统突然短路时短路电流的分析和计算,导出试验系统短路电流值。给出了本系统交、直流最大短路电流的实用计算方法。为电力系统继电保护提供了理论依据。同时,通过试验验证计算方法的有效性。     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Instantaneous communication throughputs of vehicular ad hoc networks

Vehicular ad hoc networks (VANETs) formed by connected vehicles in a traffic stream could be applied to improve safety, mobility, and environmental impacts of a transportation system. In this paper, we present analytical models for the instantaneous communication throughputs of VANETs to measure the efficiency of information propagation under various traffic conditions at a time instant. In particular, we define broadcast and unicast communication throughputs by the wireless channel bandwith multiplied by the average probabilities that one vehicle is a successful receiver and sender in a VAENT, respectively. With a protocol communication model, we derive formulas to determine the probabilities for an equipped vehicle to be a successful broadcast receiver and a successful unicast receiver/sender, and obtain broadcast and unicast throughputs along discrete and continuous traffic streams. We further examine the impacts on communication throughputs of the transmission range and the interference range of dedicated short range communication devices as well as the market penetration rate of equipped vehicles and the percentage of senders. Finally, we investigate the influence of shock waves on communication throughputs.     

基于远、近期合建的折多山公路隧道总体设计方案研究

为解决特长公路隧道升级改造困难问题,以折多山公路隧道项目为依托,创新性地提出远、近期合建的总体设计方案。通过交通量预测、工程造价、运营通风及逃生救援等方面综合比较,得出可实施的合建方案： 先期建设二级公路隧道主洞,设2段非贯通平导,后期直接将二级公路隧道作为高速公路隧道右洞,并贯通二级公路隧道平导作为高速公路隧道左洞。合建方案能有效节约工程造价,降低社会耗能。     

铁路矮塔斜拉T构桥结构设计方法实例研究

本文以渝(重庆)黔(黔江)铁路长途河大桥为工程背景,综合考虑桥址地形地质、桥梁跨度、净空及受力特点等要素,提出了主桥采用(132+132)m的矮塔斜拉T构桥型的总体设计方案,并采用数值模拟方法分析了拉索布置范围、索间距对梁部内力、刚度的影响规律.结果表明:(1)斜拉索靠近主塔布置、适当加密索间距有利于减小梁部负弯矩峰值...     

浅论山丘地区防洪治理

山洪灾害是在一定强度、持续的降雨或特殊地形地质条件下发生的。具有突发、易发、破坏性大、防御困难等特点,因而有别于城市一般地区的防洪,该文就无锡惠山地区石门下开发建设中涉及山丘防洪规划治理的问题进行了探讨。     

自动闭塞区段短区间接近轨道电路的设计与研究

四显示自动闭塞区段,车站计算机联锁一般需要3个闭塞分区作为接近轨道,当两站之间距离较短,少于3个闭塞分区时,则需要对接近轨的逻辑电路进行特殊处理。以神头站至大新站短区间为例,介绍以大新站进站信号机至出站信号机之间作为神头站的1JG、大新站出站信号机至1LQG为神头站的2JG的特殊情况,详细分析接近轨道电路的原理,并对具体工程应用进行说明。     

电磁阀故障切断报警系统

介绍电磁阀故障切断报警系统的原理和结构,重点描述了电磁阀短路保护装置、CAN通讯管理机构和上位监测机,同时介绍了该系统在本森维尔车站的使用原理和效果.