复底数和复指数的幂函数的值分布定理

用实变函数的理论讨论了复底数和复指数的幂函数w=tα的无穷多值的分布定理.在指数α为无理数时,无穷多值稠密地分布在圆周上.当指数α为纯虚数时,无穷多值是孤立点集并分布在射线上.当α为复数(非实数)时,无穷多值分布在对数螺线上.     

石河道大桥桩基础施工

针对卵石地层桩基础成孔问题,根据石河道大桥实际施工实践介绍了应用冲击钻孔的方法加以解决的施工方法,并着重分析了该方法的工艺流程和内容,以及施工中的注意事项.     

FRP正弦波形夹心桥面板的等效有限元模型

以FRP正弦波形夹心桥面板作为研究对象,得到等效正交各项异性实心板,通过理论分析和数值对比,证明了方法的可行性;采用该法对一实际的FRP正弦波形夹心板桥进行了模态分析。     

Determination of Critical Slip Surface of Soil Slope

A new complex method is presented considering not only the improvement upon the ＂bad ＂design point, but also the diversity of the newly generated complex, which is obtained by replacing the ＂bad ＂design point with the better design point located at the line between the ＂bad ＂design point and the ceotroid of the remaining design points of the old complex. The new complex method is applied to searching for the critical slip surface of two non-homogeneous soil slopes. The comparison of the results obtained by the new complex method with that by the basic complex method shows that the new complex method is much more likely to find the true critical surface for the randomly generated initial complex.     

基于ANN星识别算法的仿真平台

星敏感器是一种高精确度的姿态测量仪器，它通过对观测到的星点进行识别来计算姿态。为了能够较好地测试和验证星识别系统的性能，设计了一个基于ANN算法的星识别仿真平台。通过对该星识别仿真平台性能的测试，表明该仿真平台能够方便，实时地测试星识别算法的性能与正确性，因此说它是一种具有较好实用价值的星识别仿真平台。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

BITBUS结构及其在电气化复线渡线开关监控系统中的应用

本文提出在电气化铁路远动系统中采用高性能，低价格，灵活易用的通讯网络ＢＩＴＢＵＳ构成分层的分布式网络系统，用网络结构代替常规的双机加切换器的结构。既简化了系统结构了又成功地解决了系统资源的共与分配，并为系统以后可能的扩展与联网打下了基础。运用软件工程学的有关技术和方法开发系统软件，使系统结构清晰，易于维护和扩充，本文针对电气化复线渡线开关监控系统的特点，给出了该系统采用的软，硬件方案及其实现过程。     

WTB初运行的模拟研究

鉴于初运行所具有的特性及其在列车通信网络中的重要作用,基于初运行原理,提出初运行流程图,并将其分为命名主设备、寻找未命名节点、命名结束和构形分配四个阶段,深入分析了整个初运行过程。以此为基础,利用Java语言,编制出包括加载图片、按钮、线程管理、绘图和初运行五大模块的初运行过程模拟程序,使之能够对初运行的全过程进行步进式地显示,最后给出了软件模拟的部分结果。实现软件模拟初运行过程。     

提高铁路站场环形配电网络安全性的措施

鉴于目前铁路站场广为采用的环形配电网络存在着安全隐患,本文结合运营实践情况对此提出了一些改进措施。