基于TBM工法的隧洞工程进度定量分析——以引红济石隧洞工程TBM段为例

文章结合QTBM理论,对引红济石隧洞工程前期的开挖进度数据进行了分析统计,结果表明:该工区TBM在Ⅲ类、Ⅳ类围岩中掘进速率较为稳定,而在V类围岩中掘进速率较低;同时,获得了适合该工区的岩体品质参数以及TBM净掘进速率、平均使用率等相关参数;并据此对该工程TBM待开挖段的工程进度进行预测,预测表明剩余6600m的开挖尚需...     

Real time queue length estimation for signalized intersections using travel times from mobile sensors

We study how to estimate real time queue lengths at signalized intersections using intersection travel times collected from mobile traffic sensors. The estimation is based on the observation that critical pattern changes of intersection travel times or delays, such as the discontinuities (i.e., sudden and dramatic increases in travel times) and non-smoothness (i.e., changes of slopes of travel times), indicate signal timing or queue length changes. By detecting these critical points in intersection travel times or delays, the real time queue length can be re-constructed. We first introduce the concept of Queue Rear No-delay Arrival Time which is related to the non-smoothness of queuing delay patterns and queue length changes. We then show how measured intersection travel times from mobile sensors can be processed to generate sample vehicle queuing delays. Under the uniform arrival assumption, the queuing delays reduce linearly within a cycle. The delay pattern can be estimated by a linear fitting method using sample queuing delays. Queue Rear No-delay Arrival Time can then be obtained from the delay pattern, and be used to estimate the maximum and minimum queue lengths of a cycle, based on which the real-time queue length curve can also be constructed. The model and algorithm are tested in a field experiment and in simulation.     

城市下穿式矩形框架隧道的力学分析

文章基于结构-荷载理论对城市下穿式矩形框架隧道进行结构模型简化,同时利用有限元软件ANSYS对隧道进行了结构力学分析。分析结果表明矩形框架隧道在拐角处受力最不利,需在结构的设计及施工中根据结构截面强度验算进行配筋加厚处理,以保证隧道结构的安全。     

A shockwave profile model for traffic flow on congested urban arterials

In this paper a new traffic flow model for congested arterial networks, named shockwave profile model (SPM), is presented. Taking advantage of the fact that traffic states within a congested link can be simplified as free-flow, saturated, and jammed conditions, SPM simulates traffic dynamics by analytically deriving the trajectories of four major shockwaves: queuing, discharge, departure, and compression waves. Unlike conventional macroscopic models, in which space is often discretized into small cells for numerical solutions, SPM treats each homogeneous road segment with constant capacity as a section; and the queuing dynamics within each section are described by tracing the shockwave fronts. SPM is particularly suitable for simulating traffic flow on congested signalized arterials especially with queue spillover problems, where the steady-state periodic pattern of queue build-up and dissipation process may break down. Depending on when and where spillover occurs along a signalized arterial, a large number of queuing patterns may be possible. Therefore it becomes difficult to apply the conventional approach directly to track shockwave fronts. To overcome this difficulty, a novel approach is proposed as part of the SPM, in which queue spillover is treated as either extending a red phase or creating new smaller cycles, so that the analytical solutions for tracing the shockwave fronts can be easily applied. Since only the essential features of arterial traffic flow, i.e., queue build-up and dissipation, are considered, SPM significantly reduces the computational load and improves the numerical efficiency. We further validated SPM using real-world traffic signal data collected from a major arterial in the Twin Cities. The results clearly demonstrate the effectiveness and accuracy of the model. We expect that in the future this model can be applied in a number of real-time applications such as arterial performance prediction and signal optimization.     

城市交通系统通行性影响因素及计算理论

文章分析了震后城市交通系统通行性的影响因素,提出了包含路段单元通行概率、路段连通概率及路网连通概率的城市交通系统通行性计算理论,为城市路网的连通可靠性评价提供参考。     

Stability and bifurcation in network traffic flow: A Poincaré map approach

Previous studies have shown that, in a diverge-merge network with two intermediate links (the DM network), the kinematic wave model always admits stationary solutions under constant boundary conditions, but periodic oscillations can develop from empty initial conditions. Such contradictory observations suggest that the stationary states be unstable. In this study we develop a systematic approach to investigate the stability property of stationary states in this and other networks within the framework of network kinematic wave theories. Based on the observation that kinematic waves propagate in a circular path when only one of the two intermediate links is congested, we derive a one-dimensional, discrete Poincaré map in the out-flux at a Poincaré section. We then prove that the fixed points of the Poincaré map correspond to stationary flow-rates on the two links. With Lyapunov’s first method, we demonstrate that the Poincaré map can be finite-time stable, asymptotically stable, or unstable. When unstable, the map is found to have periodical points of period two, but no chaotic solutions. We further analyze the bifurcation in the stability of the Poincaré map caused by varying route choice proportions. We apply the Poincaré map approach to analyzing traffic patterns in more general (DM)ⁿ and beltway networks, which are sufficient and necessary structures for network-induced unstable traffic and gridlock, respectively. This study demonstrates that the Poincaré map approach can be efficiently applied to analyze traffic dynamics in any road networks with circular information propagation and provides new insights into unstable traffic dynamics caused by interactions among network bottlenecks.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

全自动泊车系统的模型设计与仿真

全球汽车保有量的增多,直接造成城市交通的拥堵以及停车位空间的减小。随之而来的就是泊车安全性问题,新手驾驶员或疲劳驾驶人员如何能在不发生碰撞的情况下,快速安全地泊车入库,成为当下研究的热点。针对以上问题,本文将对全自动泊车系统展开研究。基于B样条曲线设计出泊车路径,基于滑模变结构与预瞄方式进行泊车路径的跟踪。最后通过搭建SIMULINK与CARSIM仿真模型进行联合仿真。     

基于Vesic圆孔扩张理论的桩周土抗力计算方法研究

随着目前城市建筑物容量的增大,对作为其主要承载构件的桩基础的承载性能提出了更高的要求.桩-土相互作用问题是桩基水平承载性能研究中必须考虑的重要内容,该问题的研究对于完善桩基础设计理论和指导工程实践具有重要意义.基于Vesic圆孔扩张理论,分析水平荷载作用下桩侧土体的实际受力状态,根据桩身产生水平位移后桩周土应力为近似椭...     

汽车理论非标准答案教学改革的研究

文章针对车辆工程专业核心课程—汽车理论,结合我校该专业的定位和社会对该专业人才的实际需求,根据地方院校应用型人才培养的目标和要求,在我校进行了汽车理论课程非标准答案教学改革的探索,提出了该课程采用非标准答案教学的改革思路,并从非标准答案教学的意义、非标准答案教学改革的内容与形式、具体实施步骤以及评分标准等方面进行了细致...