爆破排淤填石法处理软基的设计与应用

爆破排淤填石法是利用爆破法达到软土置换目的的一种新的换填方法．近年来在港口工程处理软基中得到越来越广泛的应用,而且处理软基的厚度也越来越大。结合几项具体工程的设计,介绍结构设计中一些参数的选取以及质量检测方法等。     

新会基地码头软基加固监测及效果评价分析

以新会基地码头软基处理工程为例,着重介绍软土地基在堆载预压下土体的变形、固结过程。通过对地表沉降、孔隙水压力、水平位移的现场观测及对实测数据的分析,结果表明,堆载预压法能达到预期的加固目的,是经济可靠的软基加固方法。     

基床式基础防波堤的动力软化判别标准的研究

以长江口深水航道治理二期工程为依托,进行基床基础防波堤的动力软化判别标准的研究,分析在波浪作用下3个不同沉降量的典型断面下卧地基土的自重应力、附加静应力、波浪作用的附加动应力分布间的关系,初步得出该地区软粘土可能出现动力软化现象的判别标准。     

水泥土湿喷桩在高速公路海相软土处理中的应用评价

针对海相软土含水量大、粘粒含量高的特点,采用水泥土湿喷桩复合地基处理方式。通过对湿喷桩处理段的大量检测结果进行统计分析,得出的一些结论对于高速公路的软基处理具有实际意义。     

路基沉降预测及其工程应用

根据某公路软土路段的实测沉降资料,采用双曲线法预测各施工阶段测点的沉降和工后沉降量,为路面结构层的铺设及间歇期的确定提供了依据。     

基于粗糙-模糊软计算的船板线加热成形加工参数预报方法

提出一种基于粗糙-模糊软计算的建模方法,构造一种基于贴近方向修正的高精度模糊推理算法,通过有限元分析(FEA)建立板材线加热成形工艺信息系统,根据粗糙集软计算获取线加热成形的工艺规律,运用模糊推理实现加工参数的快速准确预报。粗糙-模糊建模适用于线加热成形过程的静态或动态模型的构建,为实现该工艺的智能建模与控制提供一种新的技术手段。     

疏浚饱和密实粉土剪胀特性及其对耙齿切削阻力的影响

针对黄骅港区饱和密实粉土,通过三轴剪切试验以及原型耙齿切削试验,研究饱和密实粉土剪胀特性及其对耙齿切削阻力的影响。三轴试验结果表明,黄骅地区饱和密实粉土在剪切过程中表现为应变软化性状,偏应力峰值与围压之间基本呈线性关系。在剪切过程中,土体先剪缩后剪胀,随着围压的增大,剪缩性状体现得越来越明显,应力应变性状可划分为4个不同阶段。原型耙齿切削试验结果表明,饱和土较非饱和土切削阻力增长得更快;饱和土切削阻力最大值为非饱和土切削阻力最大值的2.7~3.3倍;对于饱和土,切削阻力达到稳定值后,其波动幅度较非饱和土要大。上述试验结果均表明,土的剪胀性对于耙齿切削阻力的影响十分显著,须采取相应的措施来降低土的剪胀性对于耙齿切削阻力的影响。     

单侧边载作用下黏土中单桩负摩阻力特性模型试验研究

桩基础边载作用会在桩周产生负摩阻力,进而危及软土地区高桩码头、人工岛、路基等工程的安全。通过开展黏土中单侧堆载作用下单桩室内模型试验,测定桩身应变、桩顶沉降和水平位移,研究边载作用距离和桩型对桩身轴力及弯矩的影响,探讨桩身负摩阻力、桩顶沉降和水平位移在黏土固结过程中的时间效应。结果表明:边载作用距离对桩身最大轴力和最大弯矩有较大影响;翼板桩会增加桩身最大轴力和最大弯矩;负摩阻力和有效应力系数随时间增长且增速趋缓;增加边载作用距离和添加翼板都会提升桩身中性点位置,在这两组试验中均提升了8.33%。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

深厚软土地基钢管桩静载试验研究

通过对软土地基中1根桩长52.5 m、桩径1 m的钢管桩的压桩试验、拔桩试验和水平静载试验,探讨软土地基中钢管桩工程性状和分布规律。结果表明:软土地基钢管桩水平静载试验的最大弯矩值在泥面以下2倍桩径处,且不随着荷载的增加而改变;软土地基的水平静载试验,按照按泥面位移10 mm进行位移控制时,其m值可取3 500 kN/m~4;软土地基由于侧阻力较小,压桩试验时,传递至桩底的轴力值与桩顶荷载的比例可达30%,而拔桩时,该值为12%左右。