发动机点火波形与故障分析

点火波形是发动机点火系工作时点火线圈初级、次级电流及电压随时间（或曲轴转角）变化的关系在专用示波器上的显示，它实时地反映了点火系的工作状况。因此，点火系的故障也必然反映在点火波形上。分析了点火波形的形成、影响点火波形的因素     

以位移为基础的钢筋混凝土连续梁桥抗震设计方法

利用等效线性化方法将钢筋混凝土(RC)连续梁桥结构简化为多自由度线弹性体系,采用振型反应谱的概念研究了结构在横向地震作用下考虑多阶模态效应的直接基于位移的抗震设计方法。探讨了连续梁桥的上部结构(主梁)及桥墩(台)刚度的变化对结构横向振动模态质量与模态周期的影响,给出了多阶模态设计方法的具体设计过程。对对称与非对称连续梁桥采用相同的设计步骤进行基于位移的抗震设计,并对设计算例用非线性时程分析验证了设计结果的合理性。     

悬索桥主缆线形的鞍座影响

提出了一个基于数值解析法的悬索桥主缆线形计算方法,能全面考虑各种鞍座影响,可用于成桥状态、空缆状态和施工阶段等各阶段的主缆线形分析。通过算例分析了鞍座对主缆线形的影响,计算表明,由于直接约束着主缆的变形,鞍座对主缆线形,特别是施工阶段的主缆线形有较大的影响。计算还表明,本文方法具有考虑因素全面、计算精度高、速度快、使用方便等优点。     

挖掘机电子控制系统(Ⅰ)

简述小松、大宇等挖掘机电子控制系统、电子功率优化系统和工作模式控制系统,介绍自动怠速装置的原理及故障诊断,详细论述电子油门和发动机电子控制系统工作原理及故障诊断。     

意大利威尼斯集装箱深水港投资模式分析

全球经济回暖以及"一带一路"倡议给中资企业参与海外港口投资提供了良好契机,但海外港口投资也存在政治、经济、文化等多方面的风险。针对目前中资企业海外港口投资中存在的问题,系统分析中资企业海外港口投资模式及其优劣和适用情况,并结合国外主要港口管理模式,以意大利威尼斯集装箱深水港投资实践为典型案例,提出海外港口投资策略。     

大直径钢管桩承载力恢复过程试验研究

针对目前预制桩承载力恢复特性研究与工程应用中的不足,依托西非某海工工程,提出高应变法。采用对同一钢管桩进行初打与不同休止时间复打相结合的试验方法,研究了大直径钢管桩沉桩后的承载力恢复过程。结合地质情况、沉桩与试验结果,得到了钢管桩承载力、侧阻力及端阻力随时间变化的一般规律及影响因素,并通过静载试验对研究结果进行了验证。该研究在提高项目施工效率、降低成本的同时,还得到了有意义的规律与结论,可为后续类似项目提供参考。     

Experimental evaluation of Heavy Duty Vehicle speed patterns in urban and port areas and estimation of their fuel consumption and exhaust emissions

Exhaust emissions and fuel consumption of Heavy Duty Vehicles (HDVs) in urban and port areas were evaluated through a dedicated investigation. The HDV fleet composition and traffic driving from highways to the maritime port of Genoa and crossing the city were analysed. Typical urban trips linking highway exits to port gates and HDV mission profiles within the port area were defined. A validation was performed through on-board instrumentation to record HDV instantaneous speeds in urban and port zones. A statistical procedure enabled the building-up of representative speed patterns. High contrasts and specific driving conditions were observed in the port area. Representative speed profiles were then used to simulate fuel consumption and emissions for HDVs, using the Passenger car and Heavy duty Emission Model (PHEM). Complementary estimations were derived from Copert and HBEFA methodologies, allowing the comparison of different calculation approaches and scales. Finally, PHEM was implemented to assess the performances of EGR or SCR systems for NO_X reduction in urban driving and at very low speeds.The method and results of the investigation are presented. Fuel consumption and pollutant emission estimation through different methodologies are discussed, as well as the necessity of characterizing very local driving conditions for appropriate assessment.     

机器人生产线在船舶智能制造中的应用研究

智能制造是“中国制造2025”的主攻方向。本文先浅谈了智能船厂，并结合国内首个智能船厂试点对智能船厂的初级发展建设等进行初步探索，主要对船舶智能制造机器人生产线应用进行梳理分析，如工艺流程及布置、生产模式改进、提质增效和人员减配等。     

大直径盾构管片水平拼装试验方法探究

大直径盾构管片水平拼装试验存在效率低下甚至失败的情况,不能真实全面反映产品尺寸精度。分析其原因除大直径管片体积大、重量大的因素外,主要原因在于现有的试验设备工装简陋、试验方法粗放、规范要求低等。结合当前水平拼装的规范要求,分析现有试验方法存在的不足,对现有拼装设备工装进行改造,制定高标准的、更加严格的工艺措施,创造性地提出在每层管片拼装时增加标高检测的新思路。将新方法应用于南京长江第五大桥夹江隧道工程管片水平拼装试验,结果良好,证明了此试验方法的科学性与有效性。     

Who you are is how you travel: A framework for transportation mode detection using individual and environmental characteristics

With the increasing prevalence of geo-enabled mobile phone applications, researchers can collect mobility data at a relatively high spatial and temporal resolution. Such data, however, lack semantic information such as the interaction of individuals with the transportation modes available. On the other hand, traditional mobility surveys provide detailed snapshots of the relation between socio-demographic characteristics and choice of transportation modes. Transportation mode detection is currently approached using features such as speed, acceleration and direction either on their own or in combination with GIS data. Combining such information with socio-demographic characteristics of travellers has the potential of offering a richer modelling framework that could facilitate better transportation mode detection using variables such as age and disability. In this paper, we explore the possibility to include both elements of the environment and individual characteristics of travellers in the task of transportation mode detection. Using dynamic Bayesian Networks, we model the transition matrix to account for such auxiliary data by using an informative Dirichlet prior constructed using data from traditional mobility surveys. Results have shown that it is possible to achieve comparable accuracy with the most widely used classification algorithms while having a rich modelling framework, even in the case of sparse mobility data.