集装箱装卸桥吊具卷缆系统防失控改造

针对西门子电控系统集装箱桥吊吊具卷缆子系统在使用过程中发现的缺陷进行改造。通过修改西门子变频器参数,可有效避免桥吊吊具卷缆系统由于通信故障引发的失控,不但节约了成本,而且提高了桥吊可靠性。     

An optimization model for integrated planning of railway traffic and network maintenance

Railway transportation systems are important for society and have many challenging and important planning problems. Train services as well as maintenance of a railway network need to be scheduled efficiently, but have mostly been treated as two separate planning problems. Since these activities are mutually exclusive they must be coordinated and should ideally be planned together. In this paper we present a mixed integer programming model for solving an integrated railway traffic and network maintenance problem. The aim is to find a long term tactical plan that optimally schedules train free windows sufficient for a given volume of regular maintenance together with the wanted train traffic. A spatial and temporal aggregation is used for controlling the available network capacity. The properties of the proposed model are analyzed and computational experiments on various synthetic problem instances are reported. Model extensions and possible modifications are discussed as well as future research directions.     

基于光电复合缆的水声信号采集发射传输系统

众所周知水下电磁环境复杂,在水下采用电缆传输电信号非常容易受到海洋电磁环境干扰,并且随着距离的增加,电信号受到干扰和衰减也就越大.因此水下中长距离的信号传输采用光电复合缆传输是一个比较好的选择,光纤用来传递水声信号,电缆用来传输电力.因此本文设计了一种基于光电复合缆的水声信号采集发射传输系统,能够很好地解决上述问题.本设计将要采集和发射的水声模拟信号在采集发射端和主机端转换成光信号,端到端之间的传输采用光信号,而采集发射端的供电则由光电复合缆的电缆提供.     

上海松江区现代有轨电车规划研究

现代有轨电车因其环保、舒适、高效、低造价、高品质等特点,在国际上得到广泛应用,我国多个城市也在规划和建设之中。但是,由于其在国内尚为一种全新的交通方式,没有标准或规范予以指导,规划及设计体系不完善,有些已建项目已呈现问题。文章结合上海松江区规划背景及交通特征,阐述有轨电车示范线T1、T2线的布局规划、建设的必要性及适应性,为即将开展有轨电车规划及建设的城市提供借鉴与参考。     

轨道车辆车下线缆波纹管自动穿线方案研究

通过九屏幕分析法、因果分析法和功能分析法梳理了轨道车辆车下线缆波纹管穿线的技术难点,提出新的波纹管自动穿线方案。通过方案成本核算、效率分析和工人体力负荷改善性分析对新的波纹管自动穿线方案进行评价。改进后的波纹管穿线方案能有效地提高工作效率,降低操作员的工作强度。     

成昆铁路矮塔斜拉桥索梁锚固区模型试验研究北大核心

为研究铁路矮塔斜拉桥索梁锚固区的受力形式,以成昆铁路金沙江大桥为工程背景,针对该桥采用的新型梁顶混凝土锚固构造,通过缩尺模型试验研究其在不同荷载下的应力分布和开裂特征。结果表明:在斜拉桥成桥恒载索力作用以及最不利荷载组合索力作用下,C7锚固块更容易发生破坏,将其作为试验构件开展缩尺模型试验,发现锚固块在不同张拉荷载作用下张拉至设计索力的过程中,应变增幅基本上线性增加,卸载后同样呈线性减小,说明混凝土受力处在线弹性阶段,且应力在规范要求范围内。在试验荷载加载至140%设计索力时,锚固块前端倒角位置开始出现细小裂纹且随荷载的增加不断开展。当荷载卸载至0时,之前出现的裂缝随荷载的减小逐渐闭合,宽度肉眼不可见,表明该构造能够满足正常使用要求且具备足够的安全储备。     

A combined assessment of air and noise pollution on the High Line,New York City

The High Line is an elevated public park in New York City, transformed from an unused freight rail line. Pedestrians walking through Manhattan’s West Side can walk either on the High Line or on a footpath below. Using Manhattan as a laboratory, this paper offers a combined assessment of noise and particulate matter pollution for its pedestrians. Noise and PM_2.5 levels were recorded simultaneously for two cases (i) pedestrians walking on a footpath alongside road traffic and (ii) pedestrians walking on the elevated High Line. Testing took places over three days in autumn 2014. Results were analysed to investigate if pedestrians using the High Line would have a lower pollution exposure to those using the footpath below. Results showed statistically significant differences between the upper and lower levels in exposure to both pollution types. In order to quantify the overall impact, results are expressed through a combined air–noise pollution index. This index indicates that the average reduction in PM_2.5 and noise pollution along the High Line compared to the footpath below is approximately 37%.     

新城区轨道交通线路规划关键问题研究

对国内外主城与新城衔接的新城区(郊区)轨道线特征及交通功能等因素进行总结分析，并结合武汉市及国内外典型城市新城区轨道交通规划建设经验，对新城区轨道交通线路规划关键问题做深入研究。提出对新城区轨道交通线路规划中与其他不同层次轨道线网功能及技术标准的衔接关系；与新城区发展应注重以轨道交通引领新城区协同发展，与城市空间结构高度契合关系；新城区轨道线路走向应沿预测主要客流走廊，串联新城区商业、交通枢纽等大型客流集散点，以缓解开通初期普遍面临客流量增长缓慢，客运强度偏低的问题。     

铺缆船用电缆埋设犁土壤挖掘阻力计算

传统的计算埋设犁土壤挖掘阻力的方法一般采用经验公式计算。经验公式依赖丰富的试验数据，且只能适应特定形状和尺寸的埋设犁。由于埋设犁的形状和尺寸各不相同，基于经验公式计算土壤挖掘阻力的方法准确性不高。根据土力学基本原理，在力学分析的基础上，运用数学方法进行公式推导，得到用于计算不同形状尺寸埋设犁挖掘阻力的理论方法，解决依赖经验公式计算土壤挖掘阻力的局限性。     

船舶电缆自动化敷设系统设计与实现

在船舶电缆敷设过程中,很难借助有效的工装提高劳动效率,低空间的高强度作业存在严重的安全风险。以船舶电缆自动化敷设系统为分析对象,介绍系统组成和系统接口,采用比例积分微分(Proportion Integration Differentiation,PID)算法计算系统行程,通过PROFINET总线完成数据传输,以人机界面(Human Machine Interface,HMI)实现系统性能要求。在风电安装平台上的实际运用表明,该系统可解决造船行业劳动力成本高和安全风险大的问题。