钱江四桥抗震性能分析

根据钱江四桥地震危险性分析得到的地震动参数,基于两水准设防、两阶段设计的抗震设计思想,采用反应谱和时程分析两种方法对该桥的抗震性能进行了比较分析,分析时考虑了桩-土的相互作用及材料、伸缩缝、支座等非线形效应影响。研究结果表明:钱江四桥的抗震性能满足预期的设计性能目标,不会因地震而破坏。     

FSQ6125客车设计

简要介绍FSQ6125客车的设计目的、整车造型、主要结构特点和技术参数。     

新疆公路三级区划中环境参数的提出

自然环境条件对公路工程的影响，主要体现在路线选取、路基强度和稳定性、路面稳定性和耐久性、公路主要自然病害(包括冻融、翻浆、雪害、风沙害、崩塌、滑坡和地震灾害等)、施工条件和养护运营环境等5个方面，分析自然条件和公路工程的关系，提出公路区划中地质地貌环境参数和水热状况环境参数。阐述了环境参数的提出过程，为新疆公路自然区划三级区的划分提供依据。     

基于有限元的尼龙板热膨胀性能分析

尼龙材料由于其良好的机械性能及热性能而被广泛应用于各种生产领域,了解掌握尼龙板材在不同温度环境下的热膨胀变形对于设备的维护和保养十分重要。本文从材料的热膨胀理论出发,以有限元的理论为基础,详细讨论尼龙板材在不同温度下发生的热膨胀变形,通过有限元仿真分析尼龙板材在不同温度下的热膨胀性能,得出尼龙板在一定温度范围内的热膨胀变化规律。     

约束对隧道二次衬砌早期温度应力分布的影响

为了解决隧道工程渗水问题,基于某隧道工程,采用MIDAS-GEN对其二次衬砌早期模筑混凝土进行非稳定温度应力场以及周围约束进行研究。研究结果表明:约束可以改变隧道的早期拉应力场的分布,具有外围约束的隧道二次衬砌的拉应力为隧道厚度中间最大,无约束隧道的拉应力为外部最大,约束可以减小隧道外部区域的拉应力,使得远离约束区域的拉应力变大,而无约束隧道的拉应力分布与之相反。根据温度应力分布特点,建议在设计方面适当增大二次衬砌中间与外侧的配筋,在施工方面减小初期支护与二次砌衬之间约束等。     

基于响应面和遗传算法的柴油机瞬态过程喷油参数优化

基于台架试验数据,利用响应面法建立了某工程机械用柴油机瞬态过程喷油参数与性能的近似高精度模型,基于此模型采用遗传算法对瞬态过程喷油参数分别进行离线优化研究。结果表明:采用单目标优化确定的燃油消耗率(BSFC)、NO_x比排放量和颗粒质量(PM)比排放量的优化极限分别可达180.23g/(kW·h),8.92g/(kW·h)和0.011 8g/(kW·h),相对原机可降低多达4.5%,34.0%和37.3%。双目标优化的Pareto解集表明,相比于同时优化BSFC和NO_x比排放量,BSFC和PM比排放量更容易同时得到优化。采用权重因子适应度函数的三目标优化结果对应的BSFC,NO_x比排放量及PM比排放量分别为184.70g/(kW·h),12.62g/(kW·h)和0.012 2g/(kW·h),较原机分别降低2.1%,6.6%和35.3%。改进优化模型后,性能优化Pareto解集对应的BSFC和PM比排放量水平都非常接近其优化极限,但NO_x比排放量相对其优化极限仍然较高。     

Power network parameter estimation method based on data mining technology

The parameter values which actually change with the circumstances, weather and load level etc.produce great effect to the result of state estimation. A new parameter estimation method based on data mining technology was proposed. The clustering method was used to classify the historical data in supervisory control and data acquisition (SCADA) database as several types. The data processing technology was impliedto treat the isolated point, missing data and yawp data in samples for classified groups. The measurement data which belong to each classification were introduced to the linear regression equation in order to gain the regression coefficient and actual parameters by the least square method. A practical system demonstrates the high correctness, reliability and strong practicability of the proposed method.     

Challenges and Benefits in the Design of Coastal Walking and Cycling Amenities: Toward a More Integrated Coastal Management Approach

The planning and development of pedestrian and cycling amenities in coastal urban environments is a challenging process because a wide range of policies and considerations must be taken into account. Among these, the concepts of sustainability and more recently, resilience, have been gaining prominence. Green Infrastructure design approaches can integrate aspects of both sustainability and resilience, providing multiple services within single development projects. This study focuses on Dublin and examines a range of amenity projects at various stages of development that relate to the provision of new coastal walking and/or cycle routes. These are initially contextualized at the city level before focusing specifically on challenges and benefits associated with the design and implementation of such projects. Based on our findings, recommendations are made for optimizing the potential of future projects to effectively integrate with other initiatives so as to deliver broader policy objectives. A simple sequential model is presented that should assist developers and decision-makers to take a more integrated, multidisciplinary approach to meeting policy goals when planning and developing coastal amenities. Finally, this is remodeled into a set of considerations that are generally applicable to coastal development proposals of significant scale.     

船用柴油机SCR催化器载体结构参数仿真优化

利用AVL_BOOST软件建立了某船用柴油机SCR催化器仿真模型,通过响应面优化法和BBD试验设计法开展仿真试验,得到以NO_X转化率为目标函数,压降和NH_3滑移量为约束条件的回归方程。通过回归方程对SCR催化器载体结构参数进行优化,优化结果为:横截面积为0.069m~2,长度0.833m,载体孔密度为22/cm~2,涂层厚度0.01mm,载体壁厚0.15mm。     

船舶甲板分段纵骨焊接变形和残余应力数值模拟

基于非线性分析软件Abaqus,采用顺序耦合的热弹塑性有限元方法研究典型船舶甲板分段纵骨焊接的变形与残余应力问题。焊接过程中的温度场分析采用具有截面积分shell单元的shell/solid模型,移动热源为高斯分布与均匀体组合热源,材料考虑应变随温度变化的特性。通过与T型接头焊接实验结果对比,验证了方法的可靠性。在此基础上,计算分析了甲板分段纵骨焊接的整体变形和局部板格变形,并讨论了外板纵向和横向焊接残余应力分布规律。