无桥台斜腿刚架桥三维弹塑性分析

以武汉绕城公路K46 024 5跨线桥为原型,建立三维实体模型进行弹塑性分析,模型中考虑桥与周围土体的相互作用,得到无桥台斜腿刚架桥的真实位移、应力和破坏区域的分布,并与常规设计所采用的强迫位移法进行比较,分析常规设计计算的结果与桥的真实受力状态的差别。对于相互作用问题,本文提出土体计算范围与计算跨径的合理比值,从而为该桥型的设计与计算提供有重要参考价值的科研依据。     

薄壁杆件六面体网格剖分的组装法

针对箱梁等薄壁杆件的六面体网格自动生成问题,提出以下算法:在内外壳表面上,根据其拓扑关系和几何位置,采用映射和插值的方法布设节点;根据各个壳节点三维位置和拓扑关系对其进行编号;采用动态规划的方法,根据壳之间的拓扑几何关系组装内外壳,统一节点编号,生成单元。应用以该方法编制的相应计算软件对一座三跨连续箱形梁桥进行网格剖分。结果表明:该算法简单,效率高,生成的单元质量好。     

偏压连拱隧道病害分析及治理措施

基于某高速公路偏压连拱隧道衬砌发生严重破坏和隧道上方发生较大规模的山体开裂等病害,采用地震CT手段对隧道周围的工程地质进行了探测;根据现场监测数据,分析了隧道支护结构的受力状态及其安全性;对复杂地质条件下两种典型的施工方案进行了动态施工的数值模拟,对比分析了不同施工方案对围岩稳定和衬砌受力的影响;探讨了衬砌发生严重破坏的原因,并提出了相应的治理措施。研究结果表明:连拱隧道内侧断裂带、上方松散层等不良地质条件和不合理的施工方案是导致隧道衬砌严重破坏和山体地表开裂的主要原因。研究结果为分析和治理偏压连拱隧道病害提供了依据。     

分段线性变参数控制在数字式自动找平控制系统中的应用

为了验证分段线性变参数控制在自动找平控制系统中的应用前景,对自动找平控制系统的结构、控制方式进行了介绍;分析了分段线性控制方式的工作原理及特点,在实验室建立了沥青混凝土摊铺机数字式自动找平控制系统试验台,设计了3套试验方案,即普通电磁阀方案、高速开关阀方案和分段线性控制方案;对这3种控制方案进行了试验比较,得出了在阶跃干扰作用下,3种控制方案的响应速度及产生超调时的超调量。结果表明:分段线性控制方案具有较快的响应速度,但在系统产生超调时,其超调量相对较大。     

公路桥梁高承台桩基沉降分析研究

桩基的沉降计算是桩基工程设计不可忽视的关键问题之一。为探讨高承台桩基沉降特性，基于荷载传递法提出一种高承台桩基沉降计算方法，并采用多组不同参数对某高承台群桩的沉降特性进行了比较计算和深入分析，得到了多个影响因素下群桩沉降的变化规律。     

放宽条件定点集结模式下编组站车辆 集结排队系统分析

集结模式决定了货车集结过程的结束条件，定点集结是一种高效率的集结方式，有利于提高运输质量.针对放宽条件定点集结模式下编组站车辆集结过程，建立离散时间批到达批服务排队模型，利用嵌入式马尔可夫链方法求得离去时刻瞬时系统集结车辆队长分布，并求得任意时刻车辆集结队长分布，在此基础上分别分析了最小编成辆数，车组大小分布，车流到达强度，服务时间间隔分布对车辆平均集结队长，集结延误时间，效率，一昼夜发送车流量等系统指标的影响.分析结果表明，各因素对车辆集结排队系统影响明显.因此，利用本文提出的模型能为编组站的精细化管理和车流组织优化提供决策参考.     

An optimal data-splitting algorithm for aircraft scheduling on a single runway to maximize throughput

In this research, we present a data-splitting algorithm to optimally solve the aircraft sequencing problem (ASP) on a single runway under both segregated and mixed-mode of operation. This problem is formulated as a 0–1 mixed-integer program (MIP), taking into account several realistic constraints, including safety separation standards, wide time-windows, and constrained position shifting, with the objective of maximizing the total throughput. Varied scenarios of large scale realistic instances of this problem, which is NP-hard in general, are computationally difficult to solve with the direct use of commercial solver as well as existing state-of-the-art dynamic programming method. The design of the algorithm is based on a recently introduced data-splitting algorithm which uses the divide-and-conquer paradigm, wherein the given set of flights is divided into several disjoint subsets, each of which is optimized using 0–1 MIP while ensuring the optimality of the entire set. Computational results show that the difficult instances can be solved in real-time and the solution is efficient in comparison to the commercial solver and dynamic programming, using both sequential, as well as parallel, implementation of this pleasingly parallel algorithm.     

船用电器柜抗冲击设计研究

为增强船内部电器柜的抗冲击性能,采用有限元法对船内不同安装型式的电器柜结构进行了模态和抗冲击性能仿真分析,通过对比分析得出了使用撑杆加固型式安装的电器柜能显著提高船内电器柜的抗冲击性能的结论,并确定了电器柜抗冲击优化设计方案。     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

Generalized Maximum Benefit Multiple Chinese Postman Problem

This research is focused on a generalization on the Max Benefit Chinese Postman Problem and the multiple vehicle variant of the Chinese Postman Problem. We call this generalization, the Generalized Maximum Benefit k-Chinese Postman Problem (GB k-CPP). We present a novel Mixed Integer Programming (MIP) formulation for the GB k-CPP. Four different cases of the model are discussed. The first case, performs arc-routing with profits and assumes that the origin and destination for each vehicle is the same for each cycle and is given by the user. The next case relaxes the assumption that the origin and destination for each vehicle should be the same and allows the users to select possible origins/destinations for vehicles. Case three gets the origin for each vehicle as input and produces a solution based on finding the best destination for each vehicle. The last case, that is very general, allows the optimization model to select possibly different locations for vehicle origin and destination, during each cycle. The different cases are applied to a security patrolling case conducted on the network of University of Maryland at College Park campus and the results are compared.