基于实时视景仿真技术的海上航标监管系统

海上航标系统是海上交通安全保障体系的重要组成部分。结合上海海事局厦门航标处的航标日常管理与实时监控的实际业务需求,开展了利用实时视景仿真技术与电子海图相结合构建海上航标监管系统的应用研究和系统实现等工作。该系统的实现,有利于航标设置方案的审定与选择,有利于监控者对现场环境的把握和应急决策。     

电信计费模型的设计

依据电信计费系统存在的问题,本文详细描述了电信计费模型的设计方法和各个模块的设计内容。     

滑床板摩擦力对尖轨不足位移的影响

为解决道岔尖轨不足位移问题,根据尖轨的特殊结构外形、受力特性和扳动机理,建立尖轨不足位移计算仿真模型,分析不同滑床板表面摩擦系数取值下尖轨不足位移的变化。结果表明:摩擦力是导致尖轨产生不足位移的主要原因;尖轨不足位移随滑床板摩擦系数的增加而增大,基本成线性递增关系;最后牵引点距尖轨跟端间间距越大,摩擦系数对不足位移的影响也越大。减小摩擦力和优化牵引点间距能够较好地控制尖轨不足位移。提出设置滚轮式滑床板方案,将轨底与滑床板间的滑动摩擦转化为滚动摩擦,并优化滚轮式滑床板布置方式,进一步减小了尖轨不足位移。     

时延网络控制系统的保性能控制研究

针对网络控制系统中存在的不确定时延，在传感器采用时间驱动，执行器与控制器采用事件驱动、时延小于一个采样周期的条件下，将网络控制系统建模为一类具有不确定性的线性离散系统并且其标称模型可控。围绕该标称模型，利用Lyapunov方法，基于相应的LMI可行解，给出网络控制系统保性能控制律的设计方法。通过仿真证明了该方法的有效性。     

基于ANN星识别算法的仿真平台

星敏感器是一种高精确度的姿态测量仪器，它通过对观测到的星点进行识别来计算姿态。为了能够较好地测试和验证星识别系统的性能，设计了一个基于ANN算法的星识别仿真平台。通过对该星识别仿真平台性能的测试，表明该仿真平台能够方便，实时地测试星识别算法的性能与正确性，因此说它是一种具有较好实用价值的星识别仿真平台。     

高强钢筋混凝土非线性力学模型研究

针对高强钢筋混凝土非线性分析，对非线性分析中裂缝的模拟、钢筋混凝土材料本构关系及其非线性问题求解方法的改进进行研究，提出了适用于高强混凝土的本构曲线，并将混合法用于非线性问题，为高强钢筋混凝土梁非线性分析提供了理论基础。     

支持协同设计的船舶设计过程模型研究

船舶设计过程模型是在网络环境下开展船舶并行和协同设计系统的基础.本文根据船舶设计的特点,提出了将船舶设计过程按照项目、设计任务和设计活动三个层次进行分解的方法,并给出了船舶设计过程模型形式化定义.该模型明确了设计任务间的并行、顺序和协同关系,可以直接按设计任务构成活动网络图进行规划、分析、管理等工作,使设计过程具有良好的可变更性和可控性.     

京秦线提速路涵过渡段动力仿真与试验对比

结合京秦线提速改造工程进行了列车 路基动力仿真计算。在不同速度条件下,通过对路涵过渡段加固前后状态下机车车辆运行安全舒适性指标、轨道及路基主要动力性能指标的分析计算,对京秦既有线路涵过渡段提速到200km/h的适应性及加固方案的可行性提出了相应评价意见与建议,并与随后的实车试验进行了对比。试验测试结果验证了仿真分析的可靠性。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

Development of Green-Naghdi models with a wave-absorbing beach for nonlinear, irregular wave propagation

Two-dimensional and three-dimensional Green-Naghdi (GN) models equipped with a numerical wave-absorbing beach have been developed to simulate nonlinear, regular, and irregular wave propagation. The numerical beach is introduced near the downstream boundary to absorb outgoing waves. An appropriate amount of numerical damping and an appropriate length of numerical beach are investigated using numerical experiments. The results show that the GN models with a numerical beach work very well in simulating wave propagation in water in a small computational domain.