客滚码头前沿功能区布置及交通组织仿真优化

以安全事故频发的客滚码头前沿区域作为研究对象,提出通过将该区域进行精细化布置以及合理交通组织的方式,提高码头前沿作业的安全性与便捷性。为获得区域行人密度、在港时间、行走距离及卸船作业时间等评价指标,建立客滚码头前沿作业系统微观仿真模型。并以某客滚码头泊位为例,分析码头前沿功能区布置及交通组织方案对客滚码头前沿作业评价指标的影响,并给出推荐方案。实例证明,客滚码头前沿功能区精细化布置及合理交通组织有利于减少安全事故,并提升前沿作业便捷性。     

多体浮式防波堤消波特性数值模拟

多体浮式防波堤消波特性是决定其应用价值的重要因素,基于三维势流理论,通过使用Ansys Workbench软件和AQWA Graphical Supervisor(AGS)图像后处理软件,对多体浮式防波堤在不同入射角和浮筒吃水深度下的消波效果展开研究。结果表明,在入射角度为90°时,多浮筒浮式防波堤能够最大程度地消减波浪。同时,透射系数随吃水深度的增加而不断减小,但结构稳定性会下降。因此,实际工程中应尽量保证浮式防波堤的迎浪面与波浪的来波方向垂直,这样可以获得较好的消波效果,同时应尽量避免选择吃水深度过大的浮式防波堤。     

增大泥泵最大球形通道的方案

增大泥泵最大球形通道可以提升疏浚工程连续性,减少堵泵的风险,提高疏浚施工效率。泥泵最大球形通道和泥泵效率是泥泵设计中的矛盾点。针对上述问题通过调研提出了两种增大泥泵最大球形通道方案,采用数值模拟方法计算了3种方案的泥泵内部流场。通过对数值模拟结果的统计分析,对比3种方案泥泵的性能。确定了增大泥泵最大球形通道叶轮设计方案,为后续泥泵改造提供基础。     

Numerical Simulation of Advanced Geological Forecasting Based on Multi- Source Seismic Interferometry北大核心CSCD

For existing advanced geological forecasting, the forecast distance is short and the test frequency is high, increasing test and construction risks. Since various methods have different requirements for the test environ-ment, preparation work can be tedious and result in a long construction time thereby affecting normal construction.A new advanced geological forecast technique based on multi-source seismic interferometry for tunnels is proposed.This technique uses the blast at one end of tunnel as a centrum and receives the signal at the other end of the tun-nel, therefore allowing advanced geological forecasting of the unexcavated tunnel part by relative processing and im-aging. A numerical simulation of this kind of geological forecasting using the finite difference method to simulate two kinds of unfavorable geological bodies (karst and a fault) predicted them accurately and verified the effective-ness and accuracy of this geological forecasting method. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Effect of Explosion in a Gas Pipeline Compartment of a Utility Tunnel on Neighboring Metro Tunnels北大核心CSCD

In this paper the numerical simulation analysis of the effect of explosion in the gas pipeline compartment of a utility tunnel on neighboring metro tunnels was conducted using the software AUTODYN. The results show that the TNT equivalent in a fireproof partition with length of 200 m is 41.6 kg when the gas concentration in the gas pipeline compartment reaches 10%; the blast wave has much effect on the crown and arch waist of the round metro tunnel and it’s necessary to take some protective measures in both areas; when the surrounding soil is sand, the utili- ty tunnel is above the round metro tunnel and their alignments are in the same direction, the greater the vertical spacing between the utility tunnel and the metro tunnel, the smaller the effect of the blast wave on the metro tunnel; when the vertical spacing is 7.2 m, the maximum dynamic tensile stress is 1.86 MPa (including the static stress value of 1 MPa in the tunnel segment) and it is slightly smaller than the designed tensile strength of metro tunnel (about 1.89 MPa). The maximum vibration velocity and the maximum displacement meet the structural stability require- ments, so it is suggested the vertical spacing between the utility tunnel and metro tunnel shall not be less than 7.2 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

多智能体仿真在LNG码头选址及港口规划中的应用

液化天然气(LNG)船舶进出港进行的严格交通管制会影响港口的运营,因此在港口规划阶段须审慎决策LNG码头选址及布局问题。应用自主开发的《基于多智能体信息交互的港口运营系统仿真软件(简称:APSS)V1.0》,建立可模拟涵盖LNG船舶通航影响机制的港口运营系统仿真模型;以实际工程为例,系统探讨LNG船舶通航对近、远期港口运营影响问题的思路和方法;结合水域通航环境特点提出远期优化措施。研究结果可辅助港口规划制定。     

水力式升船机竖井内水体的振动分析

地震荷载下升船机系统内水体与浮筒间的耦合作用是影响升船机安全运行的一个难题。通过流体动力学模拟(CFD)方法,讨论在不同频率的正弦激励下升船机竖井内水体的振荡。结果表明:竖井的水体存在一个自振频率,此频率比相同径度、相同水深的矩形池的值大约10%,自振周期约为0.42s;竖井水体的自振频率基本不随高度变化。     

A comparison of modelled and real-life driving profiles for the simulation of railway vehicle operation

A key factor in determining the performance of a railway system is the speed profile of the trains within the network. There can be significant variation in this speed profile for identical trains on identical routes, depending on how the train is driven. A better understanding and control of speed profiles can therefore offer significant potential for improvements in the performance of railway systems. This paper develops a model to allow the variability of real-life driving profiles of railway vehicles to be quantitatively described and predicted, in order to better account for the effects on the speed profile of the train and hence the performance of the railway network as a whole. The model is validated against data from the Tyne and Wear Metro, and replicates the measured data to a good degree of accuracy.     

Innovative strategies for urban car-sharing systems and a simulator to assess their performance

In this paper, three innovative car-sharing systems for urban areas are proposed, based on fleets of individual intelligent vehicles with three service characteristics: instant access, open-ended reservations and one-way trips. These features provide high flexibility but create an uneven distribution of vehicles among stations. Therefore, relocation of vehicles must be performed. Three different system procedures are proposed: in the first system, relocations are performed by users; in the other two, vehicles relocate automatically, thanks to their automation. In the first two systems, vehicles are accessible only at stations, whereas in the third they are also accessible along roads. In order to provide transport managers with a tool to test systems in different realities, an object-oriented simulator is developed. The simulation provides outputs of system performance, in terms of user waiting times and system efficiency. The proposed systems are simulated for the city of Genoa, in Italy, and a comparative analysis is presented.