改善轮轨接触状态的车轮型面几何设计方法

改进了车轮型面设计方法,给出了设计方法的解析数学表达式,将轮对等效锥度与轮轨型面接触状态联系起来,对设计实例进行了轮轨几何接触、非赫兹滚动接触和车辆动力学性能分析.研究结果表明:轮轨接触点能够均匀分散分布;由于接触斑面积增大约23%,最大接触压力降低约21%,使轮轨滚动接触应力降低了约20%;装备实例型面的车辆临界速度...     

青岛港前湾港区集装箱堆场作业系统节能减排改造工程装卸工艺设计

青岛港前湾集装箱工程2010年集装箱吞吐量为1 021万TEU,是我国乃至世界上最繁忙的集装箱码头之一。通过对柴油RTG改造成为电动RTG工程的实施,大大减少了港区柴油消耗量,减少CO2、SO2等有害气体的排放,达到节能减排的目的。介绍前湾二期、三期部分箱区"油改电"改造工程的技术方案,并对节能效果进行分析。     

大型钢结构在非滑道建造称重过程中地基沉降的分析

称重是大型结构物建造过程中的重要环节,通过称重获得结构物准确的质量和重心位置参数,这些参数对大型结构物移位、吊装等工序具有重要价值.本项目的大型模块在非滑道码头强夯土基础上建造,通过建立码头强夯土地基上结构物整体的有限元模型,对结构物的建造和称重过程进行分析,评估结构物的沉降情况,以保证整个过程的稳定和安全.     

基于接触问题的桩土相互作用机理

采用子结构凝聚自由度法推导出桩土接触问题的非线性有限元平衡方程,引入接触问题的约束条件,并通过增广拉格朗日乘子法对约束条件进行处理,得到数值计算的迭代格式,进而对桩土相互作用进行非线性数值计算,结果表 明：数值计算结果与实测结果吻合较好,接触问题的引入可以合理地解释桩土相互作用的机理问题。     

基于ANSYS Workbench的直齿轮接触分析

以一对相互啮合的渐开线直齿轮为研究对象,运用ANSYS Workbench建立了直齿轮接触的有限元模型,基于非线性接触算法对齿轮进行有限元分析,列举不同接触刚度取值对应的有限元计算结果并分析结果的收敛性,在此基础上,将仿真与传统理论计算结果进行比较,结果表明,利用有限元法分析齿轮接触问题是可行的。     

齿轮副接触分析软件的开发

利用VB软件和有限元软件ANSYS的命令流及其APDL参数化设计语言,开发出齿轮副接触应力分析软件,实现了软件自动完成模型的创建、分析计算的功能,提高了分析问题的效率.并对软件仿真值与齿轮接触赫兹应力公式进行对比,结果表明,理论计算值和仿真值吻合的较好.     

Adhesion estimation at the wheel–rail interface using advanced model-based filtering

The railway industry in the UK is currently expanding the use of condition monitoring of railway vehicles. These systems can be used to improve maintenance procedures or could potentially be used to monitor current vehicle running conditions without the use of cost prohibitive sensors. This paper looks at a novel method for the online detection of areas of low adhesion in the wheel/rail contact that cause significant disruption to the running of a network, particularly in the autumn season. The proposed method uses a Kalman–Bucy filter to estimate the creep forces in the wheel–rail contact area; post-processing is then applied to provide information indicative of the actual adhesion level. The algorithm uses data that, in practice, would be available from a set of modest cost inertial sensors mounted on the vehicle bogie and wheel-sets. The efficacy of the approach is demonstrated using simulation data from a nonlinear dynamic model of the vehicle and its track interface.     

考虑沥青路面材料参数空间差异性的解析计算及影响分析

复杂服役环境下沥青路面的材料参数存在明显的空间差异性，具体表现为沿深度的模量梯度分布与非连续层间接触以及横观各向同性，实现其解析计算对现有的沥青路面力学响应分析及结构设计方法具有重要的参考价值。为此，从弹性力学基本方程出发，基于状态空间法，推导了具有指数模量梯度的横观各向同性弹性层状体系通解；在此基础上，基于波传递方法，将状态向量转换为波向量，并结合边界条件和层间条件，建立了考虑沥青路面材料参数差异性的多层路面结构解析解；然后借助MATLAB平台编制了数值计算程序，采用文献对比、BISAR程序以及有限元软件ABAQUS验证了该解析解的精度与效率；最后结合典型数值算例，阐述了该解析解在沥青Top-Down开裂和传统路面疲劳损伤分析中的应用。理论推导和数值计算结果表明：该解析解摆脱了弹性力学问题求解对应力函数的依赖性，并且借助波传播方法，避免了求解中正指数过大对求解精度的影响，并使得边界条件和不同层间接触关系的描述更加便捷；沥青路面材料参数的空间差异性不可忽视，沥青面层连续模量梯度会造成更大的路表拉应力和最大剪应力，进而加剧沥青路面的Top-Down开裂；而横观各向同性和层间接触状态间存在耦合效应，从而会加剧沥青路面的疲劳损伤。     

Dynamic model for the wheel–rail contact friction

Accurately estimating the coefficient of friction (CoF) is essential in modelling railroad dynamics, reducing maintenance costs, and increasing safety in rail operations. The typical assumption of a constant CoF is widely used in theoretical studies; however, it has been noticed that the CoF is not constant, but rather depends on various dynamic parameters and instantaneous conditions. In this paper, we present a newly developed three-dimensional nonlinear CoF model for the dry rail condition and test the CoF variation using this model with estimated dynamic parameters. The wheel–rail is modelled as a mass–spring–damper system to simulate the basic wheel–rail dynamics. Although relatively simple, this model is considered sufficient for the purpose of this study. Simulations are performed at a train speed of 20 m/s using rail roughness as an excitation source. The model captures the CoF extremes and illustrates its nonlinear behaviour and instantaneous dependence on several structural and dynamic parameters.     

Galling failure analysis in sheet metal forming process

Galling is a known failure mechanism in sheet metal forming operations,and it can lead to fracture of the products and jamming of the tool. The temperature field and normal contact pressure distributions of the tool and the blank were studied with a finite element analysis model under the action of different blank holder force and frictional coefficient. A series of forming tests of the high strength steel were conducted to validate the finite element model. The characteristics of galling failure,the damage...