加筋板整体屈曲临界应力计算与分析

利用解析法对加筋板稳定性进行了研究,忽略材料非线性的影响,利用理论方法求解四边简支加筋板的整体屈曲临界应力。对有一根加强筋的加筋板,定义板的挠曲函数,将其代入边界方程和协调方程,求解线性方程组的特征方程得到加筋板的临界应力。对有2根或多根加强筋的规则加筋板,利用能量法导出统一计算的公式得到临界应力。最后,利用有限元软件Abaqus和Nastran进行数值仿真,与理论解比较后得出本文计算方法是正确的,可以准确求解加筋板的稳定性问题。     

基于船舶轴系扭振的船用主机气缸动力输出平衡性分析

基于船用柴油机气缸动力输出平衡性评价的基础理论,对某船开展实船轴系扭振测试,在对轴系扭振时域波形图和扭振数据进行分析和计算的基础上,得出该船主机气缸动力输出不平衡变化曲线及相关结论,为进一步应用船舶轴系扭振进行船用柴油机气缸动力输出平衡性研究提供参考。     

Exact and simplified estimations for elastic buckling pressures of structural pipe-in-pipe cross sections under external hydrostatic pressure

Structural pipe-in-pipe cross sections have significant potential for application in offshore oil and gas production systems because they combine thermal insulation performance with structural strength and self weight in an integrated way. Such cross sections comprise inner and outer thin-walled pipes with the annulus between them fully filled by a selectable filler material to impart an appropriate combination of properties. Structural pipe-in-pipe cross sections can exhibit several different collapse mechanisms, and the basis of the preferential occurrence of one over the others is of interest. This article presents an exact analysis for predicting the elastic buckling behaviours of a structural pipe-in-pipe cross section when subjected to external hydrostatic pressure. Simplified approximations are also investigated for elastic buckling pressure and mode when the outer pipe and its contact with the filler material is considered as a pipe on an elastic foundation. Results are presented to show the variation of elastic buckling pressure with the relative elastic modulus of the filler and pipe materials, the filler thickness, and the thicknesses of the inner and outer pipes. Case studies based on realistic application scenarios are used to show that the simplified approximations are sufficiently accurate for practical structural design purposes.     

薄腹板T型梁的稳定分析

通过薄腹板T梁的稳定性理论分析,推导出列车运营荷载作用下梁整体稳定极限承载力和腹板屈曲的极限承载力,并利用ANSYS对24m高强度混凝土T型梁进行了有限元分析。     

基于遗传算法和可变多面体算法的耐压结构混合优化

水下结构设计的主要任务是如何进行结构优化,在保证水下结构安全可靠性的前提下减轻结构的自重.本文根据水下结构强度和稳定性要求,以遗传算法(GA)和可变多面体算法(SM)作为子算法构造了水下结构优化设计的混合优化策略,并应用于圆柱形耐压结构的优化设计,计算结果对于水下结构设计计算具有指导作用.     

钢管混凝土单圆管标准拱桥面外稳定性有限元分析方法研究

为给钢管混凝土单圆管拱桥面外稳定性分析提供实用计算方法,对钢管混凝土单圆管标准拱桥面外弹性稳定性有限元分析方法进行研究。首先使用统计学方法,统计分析国内25座钢管混凝土单圆管拱桥基本构造数据及统计学参数;其次根据已有统计数据建立50~59m、60~69m、70~79m共3类跨径钢管混凝土单圆管标准拱桥并验算其安全性能;给出弹性稳定系数分析标准拱桥面外弹性稳定性能的基本假定以及竖向荷载和横桥向荷载计算方法,采用不同有限元方法分析标准拱桥面外稳定性,确定标准拱桥面外稳定性有限元计算方法。结果表明:通过统计数据建立的钢管混凝土单圆管标准拱桥能反映工程实际;采用恒、活载稳定系数计算方法求解标准拱桥面外弹性稳定承载力及极限承载力较为合适。     

Effect of pitting corrosion on local strength of hold frames of bulk carriers (2nd Report)—Lateral-distortional buckling and local face buckling

Pitting corrosion is typical corrosion observed on coated hold frames of bulk carriers which exclusively carry coal and iron ore. In order to secure the safety of these types of bulk carriers, it is important to understand the effect of pitting corrosion on local strength of hold frames.

In order to investigate this effect, a series of 4- and 3-point bend tests on structural models which consist of web, shell and face plates has been carried out. Artificial pitting was created on the web plate to simulate pitting. In the 4-point bend tests, two equal concentrated loads have been applied vertically at the one-third points of simply supported models so that compression load due to bending would act on the face plate. In this testing condition, lateral-distortional buckling occurred before reaching the ultimate strength and local buckling of the face plate was observed after reaching the ultimate strength. The effect of web plate pitting on the lateral-distortional buckling strength was found to be small but the ultimate strength decreases with increase in the degree of pitting intensity. In the 3-point bend tests, concentrated load has been applied vertically at the center of simply supported models so that compression load due to bending would act on the face plate. In this testing condition, local face buckling occurred just after reaching the ultimate strength. The ultimate strength is found to be decreasing with increase in the degree of pitting intensity.

A series of non-linear FE analyses has been performed to simulate the deformation behavior observed in the tests. It has been revealed that even in the case of randomly distributed pitting corrosion the ultimate strength of the structural models was almost the same as that of the structural models with uniform corrosion corresponding to the average thickness loss.     

液压油缸的承载力

本文用压溃理论分析计算液压油缸的承载力,综合考虑了油缸本身初弯曲、受载偏心、活塞杆和缸筒的非刚性连接、铰支承摩擦、自重以及中间支承偏心等因素对油缸承载力的影响,并用实验对理论分析进行了验证,得到了较好的结果。     

船体薄壁梁的二次剪流和二次扭矩

将船体作为阶梯薄壁梁,用薄壁梁的约束扭转理论进行扭转强度分析的方法,是目前国内外造船界普遍使用的方法。 本文讨论了翘曲约束引起的二次剪流的计算问题,提出了一个适于用电子计算机计算的规格化的方法,并简单介绍了依据此方法编制的计算程序。 本文还通过对二次剪流直接积分,证明了二次扭矩和双力矩之间的微分关系式在具有闭室的薄壁梁的情形下同样成立。     

Controlled pipeline lateral buckling by reeling induced curvature imperfections

Expansion of pipelines installed on the sea floor due to the passage of high temperature and pressure hydrocarbons leads to lateral buckling. Interaction with a frictional sea floor can result in localization of such buckles, which must be controlled to ensure that the local bending is within acceptable limits. Periodic geometric imperfections introduced to a pipeline installed by reeling using the Residual Curvature Method are modeled and their effectiveness as expansion loops is evaluated. The imperfections are generated by allowing chosen lengths of the line to retain a small curvature by judicious action at the straightener. The model properly accounts for the complex interactions between geometric and material nonlinearities with frictional forces. It is demonstrated that as the temperature increases, the line can buckle in a snap-through manner, or can grow stably usually causing plastic deformation in its crest. The behavior is governed by the length, curvature, amplitude and periodicity of the imperfection, and by the lateral and axial frictional forces that develop. The effect of each of these variables is studied parametrically. Overall, the Residual Curvature Method is found to be a viable and effective method of controlling lateral buckling. The results provide guidance on the optimal periodicity, how to avoid snap-through buckling, and how to simultaneously minimize plastic bending.