A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

Development of advanced driver assistance systems with vehicle hardware-in-the-loop simulations

This paper presents a new method for the design and validation of advanced driver assistance systems (ADASs). With vehicle hardware-in-the-loop (VEHIL) simulations, the development process, and more specifically the validation phase, of intelligent vehicles is carried out safer, cheaper, and is more manageable. In the VEHIL laboratory, a full-scale ADAS-equipped vehicle is set up in a hardware-in-the-loop simulation environment, where a chassis dynamometer is used to emulate the road interaction and robot vehicles to represent other traffic. In this controlled environment, the performance and dependability of an ADAS is tested to great accuracy and reliability. The working principle and the added value of VEHIL are demonstrated with test results of an adaptive cruise control and a forward collision warning system. On the basis of the ‘V’ diagram, the position of VEHIL in the development process of ADASs is illustrated.     

公路GPS控制网建立方法的探讨

针对公路工程特点，就GPS测地系统建立公路GPS控制网的方法等问题进行了探讨。     

连续箱梁混凝土结构裂缝的施工控制

结合立交箱梁施工实践,介绍箱梁结构裂缝的施工控制措施。     

钢护栏改造监控要点

东环高速公路护栏改造较为成功,针对东环高速公路护栏改造过程中质量控制要点、施工注意事项作了简要概述。     

合肥市轨道交通1号线信号系统工程进度计划分析及风险控制

2016年是合肥市轨道交通1号线工程关键的一年,根据工程总体部署,结合信号系统施工调试进度计划安排,对前置工程和当前工程进展情况及计划进行全面分析,对2016年信号系统工程进度计划和目标节点可能存在的风险进行评估,制定相应的管控策略,以确保总工期目标如期实现。     

高速铁路无砟轨道精调质量控制技术研究

由于轨道设备状态"记忆"特性和生命周期管理的需要,在施工建设阶段开展轨道精调质量控制、提高轨道几何状态平顺性已成为能否进行联调联试、实现高速行车的关键。针对目前无砟轨道精调作业中的不足提出"绝对+相对"精密测量模式和"先基准后非基准"精细调整模式,在杭长高速铁路的轨道精调作业中开展实践,效果良好,全线的轨道质量指数(TQI)为2.1 mm,所采取的轨道精调控制技术可为今后无砟轨道精调质量控制提供借鉴。     

越江管道下穿的防汛墙结构设计

重要的越江管道关乎人民的生命和财产安全，越江管下穿防汛墙的布局屡见不鲜。以上海市两条越江供水管道为例，根据越江管道相关的保护规定，划定其两侧的控制范围和保护范围；分别采用优化的桩基承台结构和原状土地基处理的方式，给出管道下穿范围防汛墙的结构设计方案，并采用圆弧滑动法验算了结构的合理性。为类似的防汛墙设计，提供一种思路和方法。     

浅谈水闸基坑SMW工法桩围护结构施工及质量控制

南方平原地区水闸基础多落于软弱的土基上,由于地质条件差、周边环境复杂,通常采用SMW工法桩基坑围护结构,以确保主体工程安全、顺利施工.以横沥水闸重建工程基坑围护为例浅析了工法桩围护结构施工要点及质量控制过程,为同类工程提供参考.