铁路重载货车转向架技术应用探究

铁路重载货车转向架为铁路重载运输提供保障.由于铁路重载货车的重载质量不断增加,运行的速度越来越快速,从而造成了轮轨的损坏,这就需要加强对转向架技术的深入研究.对我国铁路重载货车转向架技术发展的历程进行阐述,详细分析了铁路重载货车转向架技术的应用,并对铁路重载货车转向架的发展趋势进行阐述.     

Dynamic simulation of train–truck collision at level crossings

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train–truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.     

动力定位系统舵桨组合推力分配研究

针对船舶动力定位系统推力分配中舵桨组合的推力建模及优化分配问题,将舵桨组合的非凸推力区域转化成4个凸区域,采用切换控制理论把非线性最优化问题转换为线性最优化问题。将舵、桨组合起来进行推力建模,以最小推力、舵角变化和推力误差为优化目标,对推进器的推力变化率、舵角变化率、推力误差范围和推力大小作了约束,采用多边形的方法把推力范围约束转化为线性不等式约束,基于总功率与总推力误差在不同推力区域设计了切换逻辑,实现了在不同的推力分配器中的切换。实船试验结果表明舵桨组合推力模型及推力分配策略是切实可行的,满足了推力分配的要求,在配备舵的动力定位船上具有良好的应用前景。     

高顶双卧重型卡车改装设计

论述了汽车改装业的现状和发展趋势,详细介绍了东风EQ1411型高顶双卧重型卡车车身改装设计的原则、过程和特点。     

考虑健康损失的路阻模型的构建

运用高斯烟羽模型计算机动车尾气排放量,然后利用支付意愿法定量分析健康损失,同时考虑延误和健康损失构建考虑健康损失的路阻模型。根据实例,分别使用Transcad和新的路阻模型计算出2个路阻,并进行交通分配。结果显示2次交通分配的路网流量不同,表明考虑健康损失的路阻模型影响了人们的出行选择,可有效解决主干路拥挤,增加次干路车流量,协调整个路网车流量均衡,提高路网交通效率。     

Failure mode and effects analysis of dual levelling valve airspring suspensions on truck dynamics

Failure mode and effects analysis are performed for a dual levelling valve pneumatic suspension to determine the effect of suspension failure on tractor–semi-trailer dynamics, using a detailed model of suspension pneumatics coupled with a truck dynamic model. A key element of failure analysis in suspensions with one or two levelling valves is determining the effect on the vehicle body roll when one or more failures occur. The failure modes considered are mainly the suspension pneumatic components, including clogged levelling valve, bent control rod, disabled lever arm, and punctured or leaking connectors and pipes. The pneumatic suspension is modelled in AMESim, with critical parameters established through component testing. Upon validating the AMESim component model experimentally, the pneumatic suspension model is integrated into TruckSim for studying the consequences of suspension failure on truck dynamics. The simulation results indicate that the second levelling valve in a dual-valve arrangement brings a certain amount of failure redundancy to the system, in the sense that when one side fails, the other side can compensate for the failure. Equipping the trailer with dual levelling valves brings an additional stabilising effect to the vehicle in the event of tractor suspension failure.     

考虑动态定价的煤炭调运方案优化研究

煤炭坑口价格的变化与市场供求有重要联系.本文在煤炭坑口价格动态定价的基础上,以煤炭产地和消费地间的煤炭调运量为决策变量,以煤炭流通过程中的总费用最小化为目标,分别构建了煤炭调运系统优化模型和考虑消费者竞争的煤炭调运优化模型,设计了遗传算法和Floyd算法相结合的求解算法.以我国内地煤炭调运问题为案例,分析了价格变化特性、可调出量与消费量比例等因素对煤炭调运方案的影响.结果表明,考虑消费者竞争时煤炭流通广义费用更低;随着煤炭可调出量与消费量比的增加,动态价格较固定价格的煤炭流通广义费用下降更快.     

新型集装箱汽车衡称重技术与误差分析研究

为了对一辆集卡装载的2个20英尺集装箱进行分别称重,设计了新的汽车衡结构,推导出计算公式并进行实验验证,得到了一种可以保证作业安全且能为港口和货主接受的集装箱汽车衡称重方法。     

重大突发公共卫生事件下城市应急医疗物资优化调度研究

针对新型冠状病毒肺炎（新冠肺炎）疫情防控中应急医疗物资调度不尽合理、集配中心中转效率不够高等问题,重新设计了重大突发公共卫生事件下城市应急医疗物资调度与配送体系,并给出了应急医疗物资的分类方法。从医疗物资使用需求和库存估计可使用时间2个维度构建需求点紧急度指标,考虑突发公共卫生事件特征,以加权的需求满足率最大化为主要目标、车辆行驶距离最小化为次要目标,构建应急医疗物资动态分配模型,并通过算例验证了模型的有效性和可行性。结果表明：所构建的模型能够兼顾医疗物资分配的公平和效率,符合突发公共卫生事件中应急医疗物资供给和需求的动态变化特性,确保在物资短时间供给不足的情况下各需求点也能公平获取一定比例的物资;且模型仅要求各需求点上报各种品类医疗物资的使用人数和库存量,同时模型还给出数据缺失时的自动计算办法,可操作性更强;运用紧急度指标对需求满足率最大化目标进行校正,解决了各需求点因需求量差异对公平分配造成的影响,使得应急医疗物资分配更加合理。研究成果结合了新冠肺炎疫情防控中应急医疗物资调度的具体过程,使得分配模型更符合实际需要,可为城市应急医疗物资优化调度提供决策依据。     

技术站间货物列车协同配流方案研究

技术站间货物列车协同作业组织模式,可实现各站获益,整体加强,对提升铁路运输生产效率具有重要意义.本文建立技术站间货物列车协同配流模型.模型以最大化两技术站的正点出发列车数作为目标函数,采用启发式遗传算法进行寻优,得到货物列车解编顺序和配流方案.最后,通过对算例进行实验分析,验证协同配流模型的实用性.结果表明,技术站间协同配流作业明显压缩车辆在站总停留时间,增加了阶段计划内正点出发列车数,进而提高了技术站内线路使用能力.