北京新机场线一期8.8m直径隧道盾构选型研究

依托北京新机场线一期工程07标段,从刀盘类型、刀盘驱动设备、刀具型式、刀具布置、渣土改良系统和同步注浆系统等方面对盾构选型进行研究。通过分析工程特点、总结以往工程经验、理论计算等方法得出结论:在全断面砂卵石地层中,辐条式刀盘适应性更佳;先行刀与刮刀组合的破岩方式以及先行刀的高差设置,有利于盾构掘进开挖土体;渣土改良材料注入口布置应充分考虑地质条件。     

Data dependent input control for origin–destination demand estimation using observability analysis

In this paper, we address the observability issue of static O–D estimation based on link counts. Unlike most classic observability analyses that relied only on network topological relationships, our analysis incorporates the actual values of input parameters, thus including network operational relations as well. We first analyze possible mathematical properties of an O–D estimation problem with different data input. We then propose a modeling approach based on mixed-integer program for selecting model input that ensures observability and estimation quality. Through establishing a stronger connection between observability analysis and the corresponding estimation problem, the proposed method aims to improve estimation quality while reducing reliance on erroneous data.     

海洋平台海洋平台常用流量计的选型分析

文章主要介绍了海洋平台常用流量计的原理和特点,结合海洋平台的特点叙述了流量计选型时的注意事项,并给出了海洋平台常用流量计的选型原则和计算方法,为海洋平台选出最合适的流量计提供了一种方案。     

城市综合体对社区居民出行行为影响研究

城市综合体作为一种高度复合的新型开发模式，通过改变社区建成环境，对居民日常活动产生了潜移默化的影响.本文从交通规划者视角，对城市综合体产生的社区居民出行行为影响进行了研究.基于问卷调查数据，通过倾向得分匹配预处理，弱化个人信息对于出行特征分析的干扰，以有城市综合体的社区居民自陈述的出行变化作拟纵向分析，初步把握城市综合体对社区居民出行特征产生的影响趋势.而后对有无城市综合体两类社区居民的出行数据进行对比分析.结果显示，城市综合体开发模式可有效促进居民产生更多的短距离慢行出行替代机动化长距离出行以满足弹性需求.本研究可为城市综合体区别于传统单一用地开发模式的交通系统配置提供方向指导.     

大跨度钢箱梁斜拉桥中跨合龙关键技术

以4座主跨超过400 m的钢箱梁斜拉桥中跨合龙控制为背景,对大跨度钢箱梁斜拉桥中跨合龙的2种方法进行对比分析,对合龙各主要工序的关键技术进行研究。提出了合龙段配切长度的计算公式和合龙口宽度连续观测的测点布置方式。建议:在调整好合龙口姿态后可不加压重,也可不采用临时劲性骨架锁定;采用无线采集设备采集合龙口结构的温度场,用激光测距仪测量合龙口宽度以提高观测效率和安全性;在悬臂施工阶段关注梁长累计误差并通过调整后续梁段的制造长度消除之。     

A carbon footprint-based closed-loop supply chain model under uncertainty with risk analysis: A case study

The management of products’ end-of-life and the recovery of used products has gained significant importance in recent years. In this paper, we address the carbon footprint-based problem that arises in a closed-loop supply chain where returned products are collected from customers. These returned products can either be disposed of or be remanufactured to be resold as new ones. Given this environment, an optimization model for a closed-loop supply chain (CLSC) in which carbon emission is expressed in terms of environmental constraints, i.e., carbon emission constraints, is developed. These constraints aim to limit the carbon emission per unit of product supplied with different transportation modes. Here, we design a closed-loop network where capacity limits, single-item management and uncertainty on product demands and returns are considered. First, fuzzy mathematical programming is introduced for uncertain modeling. Then, the statistical approach to the possibility to synthesize fuzzy information is utilized. Therefore, using a defined possibilistic mean and variance, we transform the proposed fuzzy mathematical model into a crisp form to facilitate efficient computation and analysis. Finally, the risk caused by violating the estimated resource constraints is analyzed so that decision makers (DMs) can trade off between the expected cost savings and the expected risk. We utilize data from a company located in Iran.     

Studying the benefits of carpooling in an urban area using automatic vehicle identification data

Carpooling has been considered a solution for alleviating traffic congestion and reducing air pollution in cities. However, the quantification of the benefits of large-scale carpooling in urban areas remains a challenge due to insufficient travel trajectory data. In this study, a trajectory reconstruction method is proposed to capture vehicle trajectories based on citywide license plate recognition (LPR) data. Then, the prospects of large-scale carpooling in an urban area under two scenarios, namely, all vehicle travel demands under real-time carpooling condition and commuter vehicle travel demands under long-term carpooling condition, are evaluated by solving an integer programming model based on an updated longest common subsequence (LCS) algorithm. A maximum weight non-bipartite matching algorithm is introduced to find the optimal solution for the proposed model. Finally, road network trip volume reduction and travel speed improvement are estimated to measure the traffic benefits attributed to carpooling. This study is applied to a dataset that contains millions of LPR data recorded in Langfang, China for 1 week. Results demonstrate that under the real-time carpooling condition, the total trip volumes for different carpooling comfort levels decrease by 32–49%, and the peak-hour travel speeds on most road segments increase by 5–40%. The long-term carpooling relationship among commuter vehicles can reduce commuter trips by an average of 30% and 24% in the morning and evening peak hours, respectively, during workdays. This study shows the application potential and promotes the development of this vehicle travel mode.     

中国TBM施工技术进展、挑战及对策

总结我国近30年来TBM设计与施工技术的发展历程,可归纳为以下5个阶段:1)研发探索和试用阶段;2)以国外施工承包商为主体,采用国外设计制造TBM施工我国隧道工程阶段;3)独立进行TBM招标采购和选型设计,并建立起自主的TBM施工队伍阶段;4)与国外厂家联合设计制造TBM,工程应用和自主施工快速发展阶段;5)实现TBM国产化,面向国内外TBM工程市场自主施工阶段。通过我国不同时期TBM施工的典型工程,介绍我国在复杂地质、大坡度、高海拔、不同直径、不同机型、超长隧洞TBM施工方面取得的经验、技术积累和业绩,展示我国TBM在穿越断层破碎带、软弱变形、岩爆、涌水等不良地质洞段取得的一系列施工新技术,以及最高月进尺1 868 m、平均月进尺超过600 m和掘进作业利用率超过40%的掘进技术水平。分析TBM在极硬岩、大断层破碎带、软弱大变形围岩、强岩爆围岩、涌水突泥洞段、高地热隧洞和超长隧洞工程中施工面临的风险和挑战,并提出一些相应的技术措施和对策,期望这些措施和对策在未来大量实际工程中进一步得到实践验证、优化和改进,不断积累和创新TBM设计与施工新技术。     

汕头苏埃隧道方案设计关键技术研究

根据汕头苏埃隧道的建设条件,对工程方案设计中的几个技术难点进行研究,并提出解决方案。通过采用"多级分流"理念,实现隧道与北岸4条城市主干道的交通衔接;选择"抛石+排水板"方案解决海域深厚淤泥地层中的围堰设计;8度高烈度震区选择合理的抗震减震措施解决隧道结构抗震;采取双道密封垫和加大密封垫断面的防水设计,满足地震时管片接缝张开量大的防水要求;针对复杂地层,对盾构选型和配置提出建议;对海底凸起进入隧道内的硬岩进行爆破预处理,以降低盾构施工风险。