Surf-riding and oscillations of a ship in quartering waves

The behavior of a ship encountering large regular waves from astern at low frequency is the object of investigation, with a parallel study of surf-riding and periodic motion paterns. First, the theoretical analysis of surf-riding is extended from purely following to quartering seas. Steady-state continuation is used to identify all possible surf-riding states for one wavelength. Examination of stability indicates the existence of stable and unstable states and predicts a new type of oscillatory surf-riding. Global analysis is also applied to determine the areas of state space which lead to surf-riding for a given ship and wave conditions. In the case of overtaking waves, the large rudder-yaw-surge oscillations of the vessel are examined, showing the mechanism and conditions responsible for loss of controllability at certain vessel headings.List of symbols c wave celerity (m/s) - C(p) roll damping moment (Ntm) - g acceleration of gravity (m/s²) - GM metacentric height (m) - H wave height (m) - I _x ,I _z roll and yaw ship moments of inertia (kg m²) - k wave number (m^–1) - K _H ,K _W ,K _R hull reaction, wave, rudder, and propeller - K _p forces in the roll direction (Ntm) - m ship mass (kg) - n propeller rate of rotation (rpm) - N _H ,N _W ,N _R hull reaction, wave, rudder, and propeller - N _P moments in the yaw direction (Ntm) - p roll angular velocity (rad/s) - r rate-of-turn (rad/s) - R(,x) restoring moment (Ntm) - Res(u) ship resistance (Nt) - t time (s) - u surge velocity (m/s) - U vessel speed (m/s) - v sway velocity (m/s) - W ship weight (Nt) - x longitudinal position of the ship measured from the wave system (m) - x _G ,z _G longitudinal and vertical center of gravity (m) - x _S longitudinal position of a ship section (S), in the ship-fixed system (m) - X _H ,X _W ,X _R hull reaction, wave, rudder, and propeller - X _P forces in the surge direction (Nt) - y transverse position of the ship, measured from the wave system (m) - Y _H ,Y _W ,Y _R hull reaction, wave, rudder, and propeller - Y _p forces in the sway direction (Nt) - z _Y vertical position of the point of action of the lateral reaction force during turn (m) - z _W vertical position of the point of action of the lateral wave force (m) Greek symbols angle of drift (rad) - rudder angle (rad) - wavelength (m) - position of the ship in the earth-fixed system (m) - water density (kg/m³) - angle of heel (rad) - heading angle (rad) - _e frequency of encounter (rad/s) Hydrodynamic coefficients K roll added mass - N _v ,N _r yaw acceleration coefficients - N _v N _r N _rr N _rrv ,N _vvr yaw velocity coefficients K. Spyrou: Ship behavior in quartering waves - X _u surge acceleration coefficient - X _u X _vr surge velocity coefficients - Y _v ,Y _r sway acceleration coefficients - Y _v ,Y _r ,Y _vv ,Y _rr ,Y _vr sway velocity coefficients European Union-nominated Fellow of the Science and Technology Agency of Japan, Visiting Researcher, National Research Institute of Fisheries Engineering of Japan     

基于生长算法构建Delaunay三角网的研究

提出了一种基于凸包构建Delaunay三角网的算法,它包括离散点数据的三角剖分及将约束边嵌入三角网。在对离散点数据进行三角剖分时,首先建立一个外轮廓为凸包的初始三角网,然后将剩余的点依次与既有三角网合并来生成包含所有数据点的三角网。为了将约束边嵌入三角网,找出约束边穿过的三角形,删除这些三角形并用约束边将这些三角形所围成的多边形分成两个简单多边形,再对这两个简单多边形进行Delaunay三角网剖分即可达到嵌入约束边的目的。     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

Tuning of transfer functions for analysis of wave–ship interactions

Transfer functions are often used together with a wave spectrum for analysis of wave–ship interactions, where one application addresses the prediction of wave-induced motions or other types of global responses. This paper presents a simple and practical method which can be used to tune the transfer function of such responses to facilitate improved prediction capability. The input to the method consists of a measured response, i.e. time series sequences from a given sensor, the 2D wave spectrum characterising the seaway in which the measurements are taken, and an initial estimate of the transfer function for the response in study. The paper presents results obtained using data from an in-service container ship. The 2D wave spectra are taken from the ERA5 database, while the transfer function is computed by a simple closed-form expression. The paper shows that the application of the tuned transfer function leads to predictions which are significantly improved compared to using the transfer function without tuning.     

基于ANN的船舶撞击高桩码头群桩损伤位置预测

本文采用有限元软件ABAQUS建立了船舶撞击高桩码头群桩的空间有限元模型。通过计算评估了撞击力、桩体刚度、撞击位置和撞击角度下对群桩结构损伤位置的影响。基于人工神经网络(ANN)方法,对不同参数组合下的群桩结构损伤位置进行了预测,并对ANN方法的可行性进行了评估。     

考虑横向漂移的船舶路径跟踪自抗扰控制

针对船舶运动系统中内部动态不确定和外部干扰等问题,进行了欠驱动船舶路径跟踪的自抗扰方法研究。利用Backstepping设计参考航向角,并通过线性扩张状态观测器对流干扰和横向运动引起的横向漂移进行估计。其次,根据自抗扰算法对航向进行控制,采用线性扩张状态观测器对外界干扰及内部不确定项进行估计。最后仿真结果表明,在风流干扰下所设计的控制器仍能使船准确地跟踪上参考路径,验证了所提控制方案的有效性。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

Studies on emergency evacuation management for maritime transportation

Marine transportation is a vital component of the world’s economy and transportation network. The number of people using passenger ships around the globe is increasing worldwide. Similar to other transportation systems, passenger safety is critical in maritime shipment. As emergency evacuation processes for ships are highly different from and more complicated than those for buildings and other vehicles, many researchers have published a vast range of documents related to this peculiar research area. However, there is a tangible lack of sufficient literature review studies that investigate marine emergency evacuation (MEE). That being the case, the potential of marine transportation and the effect of emergency evacuation operation on life safety have inspired the proposal of this study. This paper offers a review of the available literature on MEE modelling, analysis and planning during the period from 1973 to 2017 using a systematic approach. After reviewing relevant academic journals, peer-reviewed conference papers, and technical reports of agencies, relevant literature is analysed. In addition, the literature review is extended by means of proposing a framework methodology which considers different possible conditions and situations during MEE. Finally, insights for ship managers and policymakers are discussed and potential future research directions are identified.     

基于NFFD 算法的船体几何变形技术

本文以非均匀有理B样条基函数作为参数体属性,并结合非均匀控制点网格,建立了适用于船体几何的NFFD变形技术。重点阐述了NFFD方法的基本原理和变形规则,并以矩阵表示方法为基础构建了数学模型。研究了控制点数量和分布对变形结果的影响,增加了控制点变形几何的能力并获得了更大的设计空间。最后,以某CNG运输船为例完成了球鼻艏、船艏和船艉部分几何的自动变形。本文的工作为船型优化提供了良好的变形工具。     

船舶甲板智能抛丸机器人设计

为解决在船舶外场涂装阶段除锈和拉毛施工效率低、质量不稳定、环境污染严重等问题,设计一款用于船舶甲板的智能抛丸机器人。简介该型机器人系统组成,阐述其抛丸分系统、除尘分系统和越障辅助机构的硬件设计及其软件设计,并设计手动遥控和自主导引操作方式。实船测试结果表明,该型机器人可满足船舶甲板除锈清理的工作要求。