受侧向冲击的混凝土墩柱本构模型对比

采用ANSYS建模和LS-DYNA显式动力分析的方式,分别使用HJC、脆性损伤、盖帽和混凝土损伤等4种混凝土本构模型,对钢筋混凝土墩柱的侧向冲击过程进行仿真。从系统能量的角度验证数值计算的正确性;并将冲击过程中的冲击物块加速度和钢筋应变的历时值与试验值进行对比,进一步证实仿真计算的正确性。从各本构模型的计算结果、模拟所耗费的计算时间以及所需的参数数量等方面进行对比。     

金沙江宜宾段非恒定流过程及传播特性

金沙江、岷江的非恒定流调节过程较为复杂,在宜宾汇合后形成新的非恒定流向下游传播。通过近年实测资料,分析金沙江、岷江非恒定流特征及汇合效果。结果表明:宜宾段非恒定流特征与向家坝电站下泄非恒定流的符合度更高,岷江的非恒定流无典型过程;宜宾段水位变幅和金沙江、岷江水位变幅存在线性关系;涨幅在1.7 m左右,起调水位在1 m左右的泄水波可作为宜宾段非恒定流过程的典型代表,其在下游的传播速度沿程基本保持一致,衰减幅度随着距离的增加而减小。     

水力式升船机竖井内水体的振动分析

地震荷载下升船机系统内水体与浮筒间的耦合作用是影响升船机安全运行的一个难题。通过流体动力学模拟(CFD)方法,讨论在不同频率的正弦激励下升船机竖井内水体的振荡。结果表明:竖井的水体存在一个自振频率,此频率比相同径度、相同水深的矩形池的值大约10%,自振周期约为0.42s;竖井水体的自振频率基本不随高度变化。     

Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

公路隧道运营通风横通道周围流场特性研究

为研究公路隧道巷道式运营通风横通道周围的流场特性,以贵州凉风坳隧道为研究背景,利用流体力学研究软件Fluent建立隧道三维模型并进行了数值仿真计算。通过在隧道两边等风速条件下,对隧道内人行横通道以及车行横通道附近的流场特点研究,分析了运营通风横通道周围流场分布的具体特点。模拟结果表明:车行横通道与人行横通道两边流场分布基本相同;横通道内风速相对较小,约为隧道内风速的10%;不同风速下,横通道附近的速度分布和总压分布整体走势一致;两边流场相对稳定,不会进行风流和污染物的串流。     

A stochastic model of traffic flow: Theoretical foundations

In a variety of applications of traffic flow, including traffic simulation, real-time estimation and prediction, one requires a probabilistic model of traffic flow. The usual approach to constructing such models involves the addition of random noise terms to deterministic equations, which could lead to negative traffic densities and mean dynamics that are inconsistent with the original deterministic dynamics. This paper offers a new stochastic model of traffic flow that addresses these issues. The source of randomness in the proposed model is the uncertainty inherent in driver gap choice, which is represented by random state dependent vehicle time headways. A wide range of time headway distributions is allowed. From the random time headways, counting processes are defined, which represent cumulative flows across cell boundaries in a discrete space and continuous time conservation framework. We show that our construction implicitly ensures non-negativity of traffic densities and that the fluid limit of the stochastic model is consistent with cell transmission model (CTM) based deterministic dynamics.     

Recursive estimation of average vehicle time headway using single inductive loop detector data

Vehicle time headway is an important traffic parameter. It affects roadway safety, capacity, and level of service. Single inductive loop detectors are widely deployed in road networks, supplying a wealth of information on the current status of traffic flow. In this paper, we perform Bayesian analysis to online estimate average vehicle time headway using the data collected from a single inductive loop detector. We consider three different scenarios, i.e. light, congested, and disturbed traffic conditions, and have developed a set of unified recursive estimation equations that can be applied to all three scenarios. The computational overhead of updating the estimate is kept to a minimum. The developed recursive method provides an efficient way for the online monitoring of roadway safety and level of service. The method is illustrated using a simulation study and real traffic data.     

输气管道置换优化研究

置换是输气管道投产试运过程中的重要工艺环节,是复杂的扩散、对流过程。文中介绍了输气管道投产前用氮气置换空气的几种方法,阐述了它们的工作原理与实施步骤,对比分析了它们的优缺点,优选了置换方式,并采用Fluent流体模拟软件建立了输气管道氮气置换数学模型,进行了三维稳态和非稳态数值计算,研究了置换过程中混气段长度随管径、管长、流速变化规律,将理论推导、数值计算和现场数据进行了对比,验证了理论结果的正确性,为现场施工提供了科学依据。     

原油管线在线等质量取样系统设计及实现

为了有效解决原油长输管线反复出现的原油途耗异常问题,通过对原油油种、工艺条件和原油输送方式等的分析,设计了等质量流量比例采样系统,由该系统实现原油管线在线自动取样。系统投用后,实现了实时对量,及时发现损耗异常情况,有效控制了原油途耗不稳定的问题。采用等质量流量比例采样模式,较好地解决了多油种、边收边付、多种输送方式以及流量范围宽等不利因素影响计量的问题,具有较好的参考和推广价值。     

往复式压缩机气阀密封面失效分析

气阀是压缩机中发生故障最频繁的部件,故障会直接导致机组排气压比失调、排温高等现象,很大程度上影响企业安全生产及设备的使用寿命.文中对压缩机气阀结构及其故障特征进行了简要阐述,并通过实例分析气阀的故障特征,结合HYSYS计算出工艺气压缩过程中的各组分相图,分析了压缩工艺中气带液的产生过程,总结概括了压缩机气阀密封面失效的...