客车上水溢流改造技术探讨

针对客车上水溢流存在的问题开发了客车上水溢流控制装置。该装置分为车上和车下两部分。车上部分包括流量调节装置和液位显示控制仪,车下部分主要包括流量传感器、压力传感器及控制箱。并对该技术的改造方案和存在的问题进行了探讨。     

Efficient missing data imputing for traffic flow by considering temporal and spatial dependence

The missing data problem remains as a difficulty in a diverse variety of transportation applications, e.g. traffic flow prediction and traffic pattern recognition. To solve this problem, numerous algorithms had been proposed in the last decade to impute the missed data. However, few existing studies had fully used the traffic flow information of neighboring detecting points to improve imputing performance. In this paper, probabilistic principle component analysis (PPCA) based imputing method, which had been proven to be one of the most effective imputing methods without using temporal or spatial dependence, is extended to utilize the information of multiple points. We systematically examine the potential benefits of multi-point data fusion and study the possible influence of measurement time lags. Tests indicate that the hidden temporal–spatial dependence is nonlinear and could be better retrieved by kernel probabilistic principle component analysis (KPPCA) based method rather than PPCA method. Comparison proves that imputing errors can be notably reduced, if temporal–spatial dependence has been appropriately considered.     

Improving maritime inventory routing: application to a Brazilian petroleum case

The crude oil offloading and supply problem (COSP) is a type of operation maritime inventory routing (MIR) problem encountered by petroleum companies. In COSP, the company not only is responsible for the ship scheduling to carry the crude oil from production sites to discharge ports but also must maintain inventory levels at both ports (production and consumption) between safety operational bounds to avoid disruptions in its crude oil production and/or refining processes. We show how to improve significantly the decision-making process in a Brazilian petroleum company using a mixed-integer linear programming (MILP) model to represent COSP. Comparison tests with a current ship-scheduling method adopted in the company indicated that the use of the MILP model increased the transportation efficiency and reduced costs by 20% on average. In addition to the quantitative gains, the use of a MILP model to solve COSP has succeeded when encountering real-life events, such as variation in production or consumption rates, berth unavailability, and changes in the storage capacities at ports.     

沥青路面基层与面层局部粘结失效的受力分析

采用ANSYS通用计算软件,考虑不同的粘结状态,对沥青路面基层和面层间局部粘结状态变化时,各层底面的最大主应力和最大剪应力的变化情况进行计算。结果表明:当车轮荷载作用在粘结状态变化区域时,上面层和下面层底面的最大主拉应力随粘结的失效显著增加,中面层底面的最大主拉应力和各层底面的最大剪应力受粘结状态变化的影响较小;当车轮荷载作用在粘结状态完好区域边缘时,各面层底面将产生较大的剪应力,但最大剪应力受粘结状态变化的影响较小。     

舵系锥轴锥孔连接受力分析

通过对船舶航行工况条件下锥面连接的受力分析,得出锥面连接的表面接触比压与其能传递的轴向摩擦力和摩擦扭矩关系的计算公式;并对压入安装工况条件下锥面连接的受力分析,得出装配时压入力与接触比压关系的计算公式。通过实例计算,证明该计算方法是可行的。     

Evaluating the effects of bus design on passenger flow: Is agent-based simulation a feasible approach?

In this paper, we propose an agent-based simulation approach that is capable of simulating the flow of passengers on board buses and at bus stops. The intention is that it will be applied during vehicle development to analyze how vehicle design affects passenger flow, and thus also how it affects system performance such as dwell time. In turn, this could aid the developers in making design decisions early in the development process. Besides introducing the simulation tool itself, the paper explores the realism of the data generated by the tool. A number of passenger flow experiments featuring a full-scale bus mockup and 50 participants were carried out. The setup of these experiments mirrored a number of ‘bus journeys’ (regarding vehicle design, number of passengers boarding/alighting at each stop and so on) that had previously been simulated using the simulation tool. When the data from the simulations were compared with the data from the passenger flow experiments, it could be concluded that the tool is indeed able to generate realistic passenger flows, although with some errors when a large number of passengers board/alight. The simulated dwell times were rationally affected by the tested bus layout aspects. It was concluded that the tool makes it possible to evaluate how variations in bus layouts affect passenger flow, providing data of sufficiently high quality to be useful in early phases of vehicle design.     

信号采样理论在交通流检测点布设中的应用

在对交通流检测点布设领域研究应用现状进行分析与抽象的基础上,提出交通流检测点布设本质上属于空间交通流信号采样问题。依据信号采样理论,建立了确定检测点间距或密度的方法与流程,该流程包括空间交通流信号产生、离散傅里叶变换、频谱分析、间距确定、误差分析5个步骤。对高速公路拥挤状态下的仿真分析表明:100 m的检测点间距可以满足对拥挤交通流状态的真实检测,该数值接近于实际应用中的最小值(125 m),说明该理论方法具有较好的实用性。     

多孔混凝土基层缩缝处沥青面层应力分析

为了研究多孔混凝土基层沥青路面的结构设计方法,通过三维有限元数值分析方法,建立多孔混凝土基层缩缝处沥青路面的三维有限元模型,分析多孔混凝土基层缩缝处沥青面层的荷载应力、温度应力、荷载与温度耦合作用下的耦合应力。结果表明：基层缩缝处沥青面层底面荷载主应力多为压应力值,但其剪应力在接缝处出现峰值;在温度作用下,沥青面层应力峰值点的位置在基层缩缝中点处沥青面层的底面及表面;荷载和温度耦合作用下基层缩缝中点处沥青面层底面的第一主应力介于荷载应力和温度应力之间。