铁路集装箱中心站智能大门信息系统集成设计

本文从铁路集装箱中心站智能大门功能入手，讨论智能大门信息系统构成及系统业务流程，论述中心站智能大门建设的必要性及可行性。     

An Original Feedback Control with a Reversible Electromechanical Actuator Used as an Active Isolation System for a Seat Suspension. Part I: Theoretical Study

This paper provides an overview of a theoretical study of an active seat suspension. The principal objective of this study is to improve ride passenger comfort by reducing transmitted seat acceleration. The seat is represented by a non-linear two degree of freedom model. The system is linearized for small perturbations around the equilibrium. To control the dynamic of the seat suspension, an original feedback control command with a reversible electromechanical actuator is achieved. The synthesis of the regulator is realized on the linearized model of the seat suspension and the root locus method is employed. Stability and robustness characteristics have been studied. Numerical simulations in time and frequency domain show the interests of the regulator and its capability to isolate seat passenger.     

Fuzzy and adaptive fuzzy control for the automobiles’ active suspension system

Two typical criteria for good vehicle suspension performance are their ability to provide good road handling and increased passenger comfort. The main disturbance affecting these two criteria is terrain irregularities. Active suspension control systems reduce these undesirable effects by isolating car body motion from vibrations at the wheels. This paper describes fuzzy and adaptive fuzzy control (AFC) schemes for the automobile active suspension system (ASS). The design objective is to provide smooth vertical motion so as to achieve the road holding and riding comfort over a wide range of road profiles. The efficacy of the proposed control schemes is demonstrated via simulations. With respect to the optimal linear quadratic regulator (LQR), it is shown that superior results have been achieved by the AFC.     

化马隧道涌水处理浅析

化马隧道涌水为高压宽张岩溶裂隙水,具水量大,压力高,涌水连续、贯通性好、补给水头稳定等特点。通过详细地质勘探、水文地质条件分析及准确地质超前预报,掌握了涌水的特点和性质,提出了采用迂回导坑绕避结合泄水洞排水的处理方案,顺利通过了隧道涌水段。     

南水北调东线分流区通航水流条件及改善措施

采用平面二维水流数学模型,对南水北调东线某工程调水分流区通航水流条件进行了计算分析,提出了改善通航水流条件的方案.计算结果表明,现状条件下分流区通航水流条件不能满足规范要求,方案2通过扩挖金宝河及分流区南侧对回流区和横向流速的改善效果较好,推荐其作为工程改善措施.     

城市轨道交通折返能力的估算及影响因素

重点阐述了站前、站后折返模式下的折返能力的计算方法,并分析了信号系统的选型及参数对折返能力的影响.     

日本开发的车体倾摆系统

介绍了倾摆角为2°的空气弹簧倾摆系统。与现有的倾摆系统完全不同,在车辆连接处采用了空气弹簧式倾摆系统,实现了外轨超高离心力目标为0的倾摆。通过曲线时动作非常平滑,不会给乘客带来不舒适的感觉。     

大体积无粘结预应力混凝土卵形消化池施工技术

以武汉三金潭污水处理厂项目中2座13900m^3卵形消化池工程为实例，概要介绍了消化池施工特点及整体方案，以及伞形模架系统设计及安装、大体积混凝土、无粘结预应力施工等关键技术。伞形模架系统的成功实践，是对卵形消化池传统模板施工工艺的一次技术革新，同时对其他类似曲面体构筑物的施工也具有很大参考价值。     

郑北下行驼峰TW-2自动化系统模拟试验与软件改进

本文介绍了郑北下行驼峰TW-2自动化系统在开通之前进行的模拟试验，以及根据现场实际作业情况对软件进行的改进。     

HXD1型电力机车辅助系统仿真研究

在HXD1型电力机车辅助系统的国产化研究过程中,对该型电力机车的辅助系统（包括变压变频负载支路和定压定频负载支路）进行了仿真研究。文章描述了HXD1型电力机车辅助系统变压变频负载支路的仿真设计原理、仿真结果。