基于ANN星识别算法的仿真平台

星敏感器是一种高精确度的姿态测量仪器，它通过对观测到的星点进行识别来计算姿态。为了能够较好地测试和验证星识别系统的性能，设计了一个基于ANN算法的星识别仿真平台。通过对该星识别仿真平台性能的测试，表明该仿真平台能够方便，实时地测试星识别算法的性能与正确性，因此说它是一种具有较好实用价值的星识别仿真平台。     

刚性悬挂移动式接触网施工技术浅谈

从施工的角度介绍了刚性悬挂移动式接触网的结构组成、移动原理、施工技术、施工制点,研究了施工测量、安装计算、导线架设、悬挂调整等环节对工程质量的影响,描述了移动式接触网系统在电气化铁道特殊场所的运用前景.     

湿陷性黄土地基强夯和冲击压实技术经济分析

0引言湿陷性是指土在自重或附加应力与自重共同作用下受水浸湿后产生急剧而大量的下沉。国标中规定:当sδ≥0.015时,为湿陷性黄土。通常湿陷性黄土地基较多采用强夯法处理,其主要特点是适应性强,经济简便;而冲击压实技术是20世纪90年代从南非蓝派公司引进,具有减少工后沉降效果     

施工图设计-施工总承包模式在铁路建设中的应用研究

工程总承包是目前国际上流行的项目管理模式。铁路建设推行施工图设计-施工总承包模式,实现业主与总承包商签订施工图设计和施工合同,施工图设计和施工同时进行,统筹安排和优化,总体控制项目造价。推进铁路建设施工图设计-施工总承包模式,国家及铁道部应建立和完善有关的法律法规与规章,借鉴国内外经验,使工程总承包模式更加规范化、标准化、多样化。     

洛卢公路洛河大桥设计简介

介绍了洛卢公路洛河大桥所采用的技术标准、桥型、截面型式及结构计算,并介绍了该桥设计在构造上所做的特殊处理及施工要点。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

堆积体围岩中隧道洞口段修建技术

主要介绍丹 (东 )本 (溪 )高速公路的张家隧道右线洞口段通过弃渣堆积体围岩的施工技术。施工中采用自钻式锚杆和注浆工艺并获得成功。     

芜湖长江大桥吊索塔架的设计与施工

芜湖长江大桥无为岸九孔钢梁中有八孔采用吊索塔架辅助全伸臂方法施工。吊索塔架为轴心受压杆件,经吊索传来的力通过塔架中心立柱顶部拉板分配给中心立柱,中心立柱通过其下的支承座支承在钢梁顶的支承垫座上,将力传给钢梁。当塔架作业时,中心立柱将被顶起,塔架的走行结构也将被顶离轨顶。吊索塔架由中心立柱、立柱下支承座、垫座、万能杆件系统、走行结构、吊索和锚箱及下锚箱加长拉板等几部分组成。走行机构有四组,走行轨道设在钢梁上弦杆顶。中心立柱由标准节、顶节、底节、顶部拉板和立柱上支承座五部分组成。     

1-50m钢混结合梁施工过程中的稳定性分析

利用SAP84计算程序和根据设计规范手算相结合 ,对 15 0m钢混结合梁施工过程中开口截面钢梁的稳定性进行分析比较 ,介绍建模及计算过程 ;同时根据计算结果 ,揭示结构的薄弱环节 ,并依此检验为防止结构失稳而采取的结构构造措施