对铁岭市银州路和广裕街交叉口改建工程的评价

重点从平面交叉口工程设计、交通安全设施、壮观和谐等三个方面对铁岭市银州路和广裕街平面交叉口工程进行评价。     

港澳珠三角交通基础设施如何协调

2005年香港机场货运量340．1万吨，其中七成货物来自内地：广州机场货运量75．1万吨；深圳机场46．7万吨，其中国际货物6．3万吨；澳门机场22万吨。珠海机场的利用率只有6％左右。据中国民航总局预测，2010年以前，中国航空客、货运量都将以每年14％的速度递增；从2010年-2020年，     

改善209000吨Newcastlemax散货船总纵强度的探究

通过对209,000吨Newcastlemax散货船货舱纵向划分、下墩用途及压载舱舱容的调整,探讨了各种措施下该船型总纵弯矩的变化情况,以此来改善其总纵强度,为优化船体结构、降低空船重量提供了有利条件。     

动力定位船总布置设计方法研究

文章介绍了动力定位船总布置的设计方法,通过解析归纳和分类总结法,从各组成系统和设备角度阐述了相应的总布置要求及设计要点,并根据常见的半潜平台、起重/铺管船、钻井船几种典型动力定位船舶的总布置特征,分析动力定位船,以供相近船型设计参考。     

港珠澳大桥珠澳口岸人工岛填海工程总平面优化设计

为降低港珠澳大桥珠澳口岸人工岛工可总平面布置的阻水率,巧妙利用澳门明珠陆域向东突出的地形地貌,调整珠海接线人工岛布置,使珠澳口岸人工岛的阻水横断面减少了37%,同时使珠海接线人工岛的费用减少、工期缩短、施工难度降低。港珠澳大桥珠澳口岸人工岛填海工程总平面因地制宜的优化设计思路及方法获得了初步设计专家评审会的肯定,可为类似河口区临近大陆人工岛平面布置提供有益的参考。     

Flow Past an Accumulator Unit of an Underwater Energy Storage System:Three Touching Balloons in a Floral Configuration

An LES simulation of flow over an accumulator unit of an underwater compressed air energy storage facility was conducted. The accumulator unit consists of three touching underwater balloons arranged in a floral configuration. The structure of the flow was examined via three dimensional iso surfaces of the Q criterion. Vortical cores were observed on the leeward surface of the balloons. The swirling tube flows generated by these vortical cores were depicted through three dimensional path lines. The flow dynamics were visualized via time series snapshots of two dimensional vorticity contours perpendicular to the flow direction; revealing the turbulent swinging motions of the aforementioned shedding-swirling tube flows. The time history of the hydrodynamic loading was presented in terms of lift and drag coefficients. Drag coefficient of each individual balloon in the floral configuration was smaller than that of a single balloon. It was found that the total drag coefficient of the floral unit of three touching balloons, i.e. summation of the drag coefficients of the balloons, is not too much larger than that of a single balloon whereas it provides three times the storage capacity. In addition to its practical significance in designing appropriate foundation and supports, the instantaneous hydrodynamic loading was used to determine the frequency of the turbulent swirling-swinging motions of the shedding vortex tubes; the Strouhal number was found to be larger than that of a single sphere at the same Reynolds number.     

超巨型耙吸挖泥船结构设计

根据收集的目前世界上泥舱舱容30,000m3以上超巨型耙吸挖泥船资料,结合工信部3万立方米级耙吸挖泥船自主研发课题及目标船型38,000m3耙吸挖泥船基本设计,对超巨型耙吸挖泥船的结构设计包括骨架系统、泥舱结构型式、结构钢材等进行比较和选取,并对船体总纵强度、疲劳强度及船体振动分析进行阐述。本文对超巨型耙吸挖泥船结构设计和强度分析可提供参考和设计思路。     

21000立方米LEG/LPG船总体设计研究

21000立方米LEG/LPG船是我公司近年来自主研发的新一代两万立方米级的液化气船,它满足最新的规范、规则的要求,适用范围广,节能、环保。本文主要针对该船型的市场需求,在主尺度优化,线型设计,总布置设计,稳性等方面进行了研究。     

巴基斯坦港口发展概述

巴基斯坦有三个重要港口,卡拉奇港、卡西姆港及瓜达尔港。其中,瓜达尔港是连通欧洲、非洲和中东的最短路径,并且作为＂一带一路＂上首个战略港口。     

铝合金游艇结构强度比较分析研究

针对游艇在概念设计阶段只是对外观、结构、空间、布置做初步设计,而结构强度是否能够满足规范要求的不确定性问题,采取规范中规定的总强度载荷弯矩计算方法,分别计算了静水总纵弯矩、垂向波浪弯矩、垂向波浪冲击弯矩,从而得到加载的总纵弯矩。对两艘分别名为Kalos和Scrub铝合金概念游艇进行结构建模以及有限元分析,对中拱和中垂两种工况下,艇体总纵强度和变形情况进行校核,根据应力结果和变形特点对结果进行优化处理。