真核表达人乳头瘤病毒16型L_1蛋白在检测宫颈癌患者相应抗体的应用

用真核表达HPV16L1蛋白为抗原，酶联免疫吸附测定64例宫颈癌患者血清和阴道分泌物的相应抗体，并用型特异性聚合酶键反应检测宫颈癌组织HPV16L1基因。结果：宫颈癌组血清HPV16L1抗体阳性年64．1％，对照组20．8％；宫颈癌组阴道分泌物HPV16L1抗体阳性率64.1％，对照组25％；宫颈癌组HPV16L1基因检出率为42．2％，对照组10％。有显著差异（P＜0．01）。结论：高危型HPV感染，宫颈癌患者有明显免疫反应，全身和局部无明显差异，真核表达HPV16L1蛋白可用于宫颈癌患者的抗体测定。     

Kinetic characteristic for a synchronal rotary compressor

The synchronal rotary compressor is si mple instructure,but it has stronger adaptability for a vari-ety of working medium,so it is a good type as aircompressor,oil pump andrefrigerationsystemcom-pressor.The geometric theory and structure charac-teristics of this mechanis m are introduced[1].Itgives the designing background for the synchronalrotary compressor.The calculational methods of arotary speed of cylinder and relative speed bet weenthe cylinder and bladed rotor are deduced in detail;the…     

MODEL AND SIMULATION FOR A BRUSHLESS AC GENERATOR WITH AROTARY RECTIFIER

Objective For a brushless AC generator with a rotary rectifier, it is necessary and significant to model and simulate at normal and fault operation states. Methods Two new concepts, namely, Simulink signals and PSB (Power System Blockset) variables, are proposed, and the difference between the two concepts is clarified. Based on the new model for synchronous machines, a simulation model for a brushless AC generator with a rotary rectifier is constructed by Matlab/Simulink/PSB. This new model, which has a speed input terminal and an exciting voltage input one, can simulate the real electrical characters and direct mechanical connection between two synchronous machines perfectly. The rotary rectifier is a three-phase full-wave bridge rectifier which consists of six diodes. The model for the diodes is a macro-model which possesses much better accuracy than an ideal one of switches. Results Based on the present model, some simulation results such as exciting current waveform, phase current waveform and phase voltbge waveform are afftained at several operation conditions. Conclusion The simulation for a brushless AC generator with a rotary rectifier is demonstrated at normal and fault operation states, respectively. The results confirm the presented method.     

高性能沥青路面（Superpave）的技术初探

采用旋转压实新技术,用PG等级和常规指标评价SBS改性沥青的技术性能。从原材料、配合比设计、现场施工等方面简略介绍了Superpave技术在沪蓉高速公路成都段的首次应用,为今后Superpave技术推广应用提供借鉴。     

THE EDDY LOSSES OF A MAGNETIC THRUST BEARING

Accurate calculations of losses associated with the operation of magnetic bearings are particularly important for high speed applications where the rotor losses are expected to be large and for some particular applications where even low power losses will be critical. Power losses in the magnetic thrust bearing is often neglected, but if there is misaligned in the rotor and bearing, the magnetic field in the thrust bearing is no longer axisymmetric one, or the dynamic control current in the winding is time dependent one, eddy currents are caused to flow inside the conducting material, then the power losses are very important for magnetic bearing design. This paper presents an analytical model of a thrust magnetic bearing, and the magnetic fields, forces and losses of thrust magnetic bearing are calculated. In the calculations the frequency of dynamic control current is up to 1 000 Hz, rotating speed is from 60 rpm to 1 200 rpm, and the non-linearity of material is also taken into consideration. The results shows that if the magnetic field is not saturation, the eddy losses is proportional to dynamic control current frequency and a square function of dynamic control current, and also 5/2 power function of shafts speed.     

粉喷桩处理软土地基施工技术

粉喷桩加固软土地基的原理是：利用压缩空气携带着粉体固化材料，经过橡胶软管输送到钻头，借助叶片在旋转提升时产生的空隙喷出，喷出的混合气体在空隙中压力急剧降低，促使固化材料粘附在旋转叶片切开空隙的土中，地基土固化材料通过水泥的水解和水化作用、离子交换、硬化反应、碳化反应后，形成坚硬稳定的土体，从而达到加固软土地基的目的。其施工工艺流程见图1。     

磁浮轴承系统的数学模型与控制分析

磁浮轴是一种依赖电磁力支承转子的新型无接触轴承,与传统油润滑轴承相比,具有许多优越性。介绍了磁浮轴承的基本原理和结构,在建立磁浮轴承一对径向定位电磁铁单自由度数学模型的基础上,对该不稳定系统进行了ＰＩＤ补偿控制,研究了控制器参数对系统稳定性的影响。     

飞越谜雾

汽车，火车，轮船，飞机等高速交通工具的出现，它们给人类带来了现代的生活节奏，奔波于拥挤的大都市的人们在享受着现代科技带来的高速与高效率的同时，却在上天赐予的“雾”面前大都停止了前进，一意孤行却使生命在一刹那的碰撞之间可能化为乌有。     

车削制造金属纤维时速度对纤维特性的影响

研究了用自旋转车刀制造金属长纤维时，提高切削速度对纤维主要性能指标的影响。试验结果表明：提高切削速度有利于改善纤维的质量，提高纤维的强度，从而提高了纤维的切削效率。     

基于旋转压实法的水泥冷再生混合料性能研究

为更好地模拟水泥冷再生混合料现场施工,采用旋转压实法制备水泥冷再生混合料试件,测试分析其力学性能及稳定性,并与静压成型法进行对比,探讨采用旋转压实法开展水泥冷再生混合料设计的可行性,并基于旋转压实法研究不同再生料掺量(60%、70%、80%)下水泥冷再生混合料的力学性能(抗压强度、劈裂强度及回弹模量)及稳定性能(水稳定性及冻稳定性)。结果表明,随新集料掺量增加,水泥冷再生混合料的最佳含水量降低、最大干密度增加;相同水泥剂量下,掺加新集料后,水泥冷再生混合料的力学强度、稳定性能明显提升;掺加30%新集料的水泥冷再生混合料无侧限抗压强度、劈裂强度及回弹模量相对于未掺加新集料的试件分别提升了约50%、80% 和 45%,软化系数和耐冻系数分别可提升到0.90以上;相对于传统的静压成型方法,旋转压实法制备的水泥冷再生混合料试件的力学性能提升幅度在30%以上,且稳定性能也略有提升。