Reliable routing algorithm in marine ad hoc networks

A routing algorithm called DNH for increasing efficiency of mobile ad hoe network is presented, which is based on a new cflteflon called TSS (Temporarily Steady State), combining with wireless transmission theory that makes networks topology correspondingly stabilization. Also the DNH algorithm has the characteristics of giving up queuing in a node, but selecting another idle node instead of the node for forwarding data packets if the node has a full throughput. Simulation evaluation shows that selecting another node is better than queuing in a full throughout node if some conditions are satisfied, especially during a sea battle, every warship in ad hoe network wants to contest time and increase propagation reliability. The DNH algorithm can help decrease routing time, and raise efficiency of marine ad hoe networks.     

非结构化网格浸入边界法的流固耦合数值模拟(英文)

This paper presents an improved unstructured grid immersed boundary method. The advantages of both immersed boundary method and body fitted grids which are generated by unstructured grid technology are used to enhance the computation efficiency of fluid structure interaction in complex domain. The Navier-Stokes equation was discretized spacially with collocated finite volume method and Euler implicit method in time domain. The rigid body motion was simulated by immersed boundary method in which the fluid and rigid body interface interaction was dealt with VOS (volume of solid) method. A new VOS calculation method based on graph was presented in which both immersed boundary points and cross points were collected in arbitrary order to form a graph. The method is verified with flow past oscillating cylinder.     

民营物流企业员工结构化培训的新模式与实践

论文分析了民营物流企业员工培训的现状,论述了民营物流企业进行员工培训的积极意义.提出了民营物流企业员工培训的四个差异化特征,基于上述的差异化特征,提出了民营物流企业员工结构培训新模式.该模式包括培训需求分析结构化、培训内容体系结构化、培训运作体系结构化、培训评估体系结构化等四大模块,同时论述了培训的动态管理.论文结合H物流公司的实际运作分析了培训结构化新模式在民营企业物流公司中的运用,对我国民营物流企业的员工培训开展具有一定的指导意义.     

高速混合PCB板的电磁兼容性设计

结合PCB设计的经验,首先探讨了包含高速、高频信号PCB设计中电磁兼容性的基本问题,接着给出针对高速数模混合信号PCB设计中具体的电磁兼容性设计原则和方法.     

VBA编程对机舱监测报警系统的改善

本文把VBA编程应用在RSView32开发的机舱监测报警系统中,结果表明VBA编程大大地提高了监控系统功能。     

柴油机精确实体模型的结构化网格建立与应用

利用逆向工程获得4B26柴油机的螺旋进气道,通过三维造型软件,建立该柴油机进气道—气门—气缸的精确实体模型。应用多块结构化网格的划分思想,借助ICEM—CFD软件,完成4B26柴油机整机的结构化六面体网格划分,建立了基于KIVA—3V程序的柴油机瞬态仿真模型。计算结果表明,所建网格能够满足KIVA—3V的计算要求,瞬态模型计算的缸内压力与试验值吻合较好,实现了KIVA—3V程序在复杂计算区域上的应用,拓展了程序的使用范围。     

汽车线束3D仿真布线设计与技巧

简述汽车线束的3种布局方式,汽车研发设计初期3D仿真布线设计技巧及汽车线束3D布线设计过程中的要点、注意事项等.     

用结构化非线性最小范数法识别包装系统模态参数

考虑到包装系统的复杂性,可将包装件建模为多模态系统.对结构化非线性最小范数法进行改进,推导出了识别系统自由响应的零点和留数的迭代法,该方法采用以Prony方法识别出的系统的零点和留数为迭代起点,模拟结果表明：该方法与Prony方法相比具有更好的精确性,为准确识别包装系统各模态的参数打下基础.     

基于非结构化网格的汽车除霜风道数值模拟

利用基于非结构化网格的有限体积法对某一汽车风道进行了数值模拟,根据模拟结果对原型风道进行几何优化及计算.计算结果表明,优化后的风道各出口流量分配合理,压力损失明显降低,前挡风玻璃上的气流速度大小分布合理.利用热球风速仪测量了安装改型风道的样车前挡风玻璃上的气流速度.测量结果表明,与原型风道相比,改型风道样车前挡风玻璃上的气流速度明显增大,且分布更为均匀.     

铁路智能运输系统体系框架结构化方法应用研究

结合"铁路智能运输系统体系框架研究"项目,重点对体系框架的研究方法进行研究.概述结构化方法的基本原理,介绍结构化分析SA与结构化设计SD在构建RITS体系框架中的应用,以及下一步的研究重点.