声强理论在高速铁道车辆噪声测试与分析中的应用

运用声强理论知识,根据对国外高速铁道车辆进行的运行噪声测试和分析,确定了在不同工况、不同运行速度、不同测试位置时的高速铁道车辆车内噪声分布规律,对我国进行高速铁道车辆防噪降噪设计有较高的参考价值。     

自适应神经网络用于船舶动力定位系统

船舶动力定位（DP）采用一种控制系统驱动装在船上的侧推器和尾部推进器或者几个全回转的推进器，使船定位在海平面的要求位置上。船受到风、浪及流等海洋环境力的作用时会漂移离开原位置，传统的控制方法是采用PID（比例、积分、微分）反馈控制。顾和李（1994）提出了一种新的基于人工神经网络的控制方法，它具有许多优越性：①一个可随意调节的目标函数以适合不同的需求──定位精度高或节约定位能量后前馈控制并能自适应于不同的环境力变化包括非线性的波浪漂力；本文在目标函数中引入了与速度相关的项，从而提高控制质量。这一方法也可用于自动驾驶船舶沿设定的轨迹航行。计算机模拟结果表明本方法能达到很好的控制效果。     

牙周炎患者红细胞免疫功能及发病机理研究

采用酵母菌花环试验对31例牙周炎患者红细胞免疫粘附功能、循环免疫复合物、补体C_3含量进行了检测,并与正常组进行了比较。结果显示:牙周炎患者红细胞膜免疫复合物及循环免疫复合物均升高,补体C_3含量降低,且皆与正常组有显著性差异。作者认为:免疫复合物在牙周炎发病机理中有一定的意义,牙周炎患者红细胞免疫对清除循环免疫复合物起着重要作用。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

集装箱龙门起重机微机控制系统

本文介绍了将微型计算机应用于集装箱起重机自动控制系统的设计思想和方法。在该系统中，以集装箱起重机为控制对象，用单板机作为控制器，通过传感器，驱动放大电路及接口芯片等构成一个完整的自动控制系统。此系统基本实现了集装箱起重机的自动控制，并给集装专用吊具与集装箱迅速准确的自动对位带来好处。     

多值非线性系统的自适应控制

提出了带有多值非线性环节的线性离散系统的自适应控制算法，仿真实验的结果表明：该算法简单易行具有明显的优点，跟踪误差比采用一般的自适应控制算法时要小得多，且能保证闭环系统大范围近收敛。     

远动信息编译码算法实现

本文从远动信息传输需要出发，对运动信息传输格式及其循环冗余校验码的生成算法进行了研究，并对有关算法进行了软件实现。     

编组站驼峰车辆溜放速度控制系统的研究

以计算机和红外线传感器为主，研制了编组站驼峰车组溜放速度控制系统，系统通过检测车辆溜放的速度，计算出所需制动力的大小，通过缓器对车辆溜放进行速度控制，并具有对解体车辆自动计数，各种故障报警等功能。     

电缆铝护套连续包覆生产线协调运行控制系统的研究

分析了由活套形式构成的协高运行控制系统中因产品伸长和收线或放线半径变化对系统偏差调节过程的影响。论述了系统待定参数的合理值，并设计出能适应无法在是取半径收排系统电动机转速环与活套之间的配合电路。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.