某型直流充电柜温度场仿真

对某型直流充电柜满负载工况下温度场进行仿真,根据实验测量数据验证仿真结果准确性,成功完成了对充电柜温度场的建模仿真工作,并实现对初始模型的简化,为对整个充电站进行温度场建模仿真奠定了基础。     

轨道复合不平顺对无缝线路横向变形的影响分析

轨道复合不平顺会对行车的安全及稳定性产生较大影响,也是影响无缝线路横向变形的一个重要因素。为研究轨道复合不平顺对无缝线路的具体影响,通过构建三维轨道框架非线性有限元模型,采用轨道框架单点(或多点)位置发生横向及竖向位移来模拟复合不平顺状态,通过计算获取节点位移变化规律,进而分析轨道复合不平顺对无缝线路横向变形的影响作用。研究结果表明,轨道的复合不平顺会对无缝线路的横向变形产生显著的影响;当线路出现三角坑等类似病害时,其节点位移变化更为显著,在无缝线路的日常养护维修中应尤为注意。     

营运大客车正面碰撞乘员伤害的研究

客车发生正面碰撞事故约占客车碰撞事故的50%~60%。利用LS-DYNA软件,建立了包括假人、安全带和安全气囊在内的大客车车体有限元模型,对不同速度下营运大客车的正面碰撞特性进行了模拟仿真计算,分析了无任何保护措施、佩戴安全带及佩戴安全带且安全气囊起爆三种事故形态下乘员头部HPC值、胸部压缩量和大腿骨轴向接触力等伤害值。研究结果表明,安全带对于驾驶员的保护意义重大,为营运大客车乘员保护设计以及合理制定营运大客车正面碰撞法规提供数据参考。     

Can we reliably assess climate mitigation options for air traffic scenarios despite large uncertainties in atmospheric processes?

Air traffic has an increasing influence on climate; therefore identifying mitigation options to reduce the climate impact of aviation becomes more and more important. Aviation influences climate through several climate agents, which show different dependencies on the magnitude and location of emission and the spatial and temporal impacts. Even counteracting effects can occur. Therefore, it is important to analyse all effects with high accuracy to identify mitigation potentials. However, the uncertainties in calculating the climate impact of aviation are partly large (up to a factor of about 2). In this study, we present a methodology, based on a Monte Carlo simulation of an updated non-linear climate-chemistry response model AirClim, to integrate above mentioned uncertainties in the climate assessment of mitigation options. Since mitigation options often represent small changes in emissions, we concentrate on a more generalised approach and use exemplarily different normalised global air traffic inventories to test the methodology. These inventories are identical in total emissions but differ in the spatial emission distribution. We show that using the Monte Carlo simulation and analysing relative differences between scenarios lead to a reliable assessment of mitigation potentials. In a use case we show that the presented methodology can be used to analyse even small differences between scenarios with mean flight altitude variations.     

Traffic and emissions impact of congestion charging in the central Beijing urban area: A simulation analysis

Congestion charging is being considered as a potential measure to address the issue of substantially increased traffic congestion and vehicle emissions in Beijing. This study assessed the impact of congestion charging on traffic and emissions in Beijing using macroscopic traffic simulation and vehicle emissions calculation. Multiple testing scenarios were developed with assumptions in different charging zone sizes, public transit service levels and charging methods. Our analysis results showed that congestion charging in Beijing may increase public transit use by approximately 13%, potentially reduce CO and HC emissions by 60–70%, and reduce NOx emissions by 35–45% within the charging zone. However, congestion charging may also result in increased travel activities and emissions outside of the charging zone and a slight increase in emissions for the entire urban area. The size of charging zone, charging method, and charging rate are key factors that directly influence the impact of congestion charging; improved public transit service needs to be considered as a complementary approach with congestion charging. This study is used by Beijing Transportation Environment and Energy Center (BTEC) as reference to support the development of Beijing’s congestion charging policy and regulation.     

Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.     

卡西姆港燃煤应急电站卸煤码头港池水域平面布置优化

针对复杂水域条件下大型散货码头的水域平面布置,基于卡西姆燃煤应急电站码头工程项目,根据对周边已建工程、红树林以及水动力等主要影响因素的深入分析提出初步平面方案,并通过船舶操纵模拟试验对平面布置及相关尺度进行优化,合理确定本工程平面布置方案。结果表明,本工程的建设对周边影响较小,水域尺度能够满足船舶通航及靠离泊要求,水域平面布置合理。     

Data dependent input control for origin–destination demand estimation using observability analysis

In this paper, we address the observability issue of static O–D estimation based on link counts. Unlike most classic observability analyses that relied only on network topological relationships, our analysis incorporates the actual values of input parameters, thus including network operational relations as well. We first analyze possible mathematical properties of an O–D estimation problem with different data input. We then propose a modeling approach based on mixed-integer program for selecting model input that ensures observability and estimation quality. Through establishing a stronger connection between observability analysis and the corresponding estimation problem, the proposed method aims to improve estimation quality while reducing reliance on erroneous data.     

LNG码头应急通道与应急锚地研究

本文针对LNG应急逃离情况以及国内LNG应急锚地使用现状,总结分析国内、外LNG应急锚地布置情况;结合江苏滨海LNG码头通航条件,提出LNG应急通道及应急锚地三种布置方案,通过操船模拟试验论证比选并得出结论,供类似工程参考。     

考虑移步需求的无桩型共享单车动态调度研究

共享单车系统自发的不均衡性导致单车数量分布与用户需求分布之间产生偏移，降低了系统服务能力，需要调度实现再平衡. 现有动态调度算法缺乏考虑起点车辆供给不足，用户在出行过程中“再次”取车的移步需求，难以准确识别用户真实的出行需求分布，降低了调度效果. 本文提出以用户出行选择行为为下层，以调度车辆路径规划为上层的双层规划模型框架，设计结合仿真系统的启发式求解算法. 算例场景基于上海市虹口、杨浦区共享单车历史出行数据搭建，并进行网格化处理. 算例结果表明，模型能有效识别移步需求，提高共享单车的供需匹配能力. 针对各类调度资源配置情况，共享单车的供需匹配率提升18.07%~ 19.89%，提高了共享单车系统的管理效率.