影响车辆转向瞬态响应特性的因素研究

利用ADAMS/CAR二次开发模块,建立了国产某小客车的整车多体系统动力学仿真模型。分析了车辆转向盘角阶跃输入和脉冲输入时的瞬态响应特性,并对相关的影响因素进行了预测分析,通过调整后轮侧倾刚度等参数,优化转向瞬态特性响应结果,经过样车的试验验证了优化结果。     

沉管隧道地震响应分析

文章采用田村重四郎和冈本舜三提出的沉埋隧道地震响应分析的数学模型,对南京长江越江隧道(沉管段)方案进行了地震响应的纵向受力分析。分析中采用了隧址处100年超越概率为2%的人工合成地震加速度,考虑了不同管段的联结方式和不同的计算参数,对初步设计中沉管段结构的安全性进行了论证,所提供的数据曾为设计单位所采纳[1]。     

8XC196KC用于ABS轮速测量方法的改进研究

对ABS中速度测量的过程进行仔细的分析,提出了一种能够将精度和实时性相结合的速度测量方案,该方案能够较为有效地平衡精度和实时性之间的矛盾,并通过实际程序的执行验证了这一结论。这一测量方法不仅可用于ABS的速度测量,也可推广用于其他的速度或周期测量方案中。     

主动悬架系统对汽车加速性能改善分析

针对前轴驱动汽车加速过程中质量转移而使最大驱动力下降的问题，提出了利用主动悬架系统减小汽车车轮动态载荷对其进行改善的方法，并进行了控制系统的设计。模拟分析表明，利用主动悬架系统可以有效地降低前轴驱动汽车由于质量转移而引起的车轮动载荷的改变，是解决加速过程中驱动力下降的一个比较有效的方法。     

发动机曲轴动态设计研究

建立了发动机曲轴的三维实体模型 ,进行了自由模态有限元分析 ,并与试验结果进行了对比 ,在此基础上进行了动态响应分析、灵敏度分析及动力修改 ,完成了曲轴动态设计的各个环节。     

Transient responses of a VLFS during landing and take-off of an airplane

The transient elastic deformation of a pontoon-type very large floating structure (VLFS) caused by the landing and take-off of an airplane is computed by the time-domain mode-expansion method. The memory effects in hydrodynamic forces are taken into account, and great care is paid to numerical accuracy in evaluating all the coefficients appearing in the simultaneous differential equations for the elastic motion of a VLFS. The time-histories of the imparted force and the position and velocity of an airplane during landing and take-off are modeled with data from a Boeing 747-400 jumbo jet. Simulation results are shown of 3-D structural waves on a VLFS and the associated unsteady drag force on an airplane, which is of engineering importance, particularly during take-off. The results for landing show that the airplane moves faster than the structural waves generated in the early stage, and the waves overtake the airplane as its speed decreases to zero. The results for take-off are essentially the same as those for landing, except that the structural waves develop slowly in the early stage, and no obstacle exists on the runway after the take-off of airplane. The additional drag force on an airplane due to the elastic responses of the runway considered in this work was found to be small in magnitude.     

Evaluation of expected maximum values of forces acting on containers and lashing rods on a container ship

The appearance of a number of large container ships in the 8000 TEU range raises the importance of a plan for container lashing arrangements on deck in relation to the design of the ship. Therefore, it is expected that a new method for evaluating the lashing arrangements on deck will be introduced which is applicable regardless of the ship's size and the lashing pattern, instead of using the standards of several different societies, as happens at present. To evaluate the lashing arrangements on deck, the expected maximum values of the forces acting on the containers and lashing rods should be evaluated. This paper presents a new method of evaluating the container lashing arrangements on a container ship using an "acceleration ellipsoid." The applicability of the acceleration ellipsoid to an evaluation of the expected maximum values of the forces was examined by comparing the expected maximum values of the forces calculated by the long-term distribution calculation known as the "Fukuda method," to those calculated using the acceleration ellipsoid. By comparing these results, it was confirmed that the expected maximum values of the forces calculated using the acceleration ellipsoid were not less than those calculated through by the long-term distribution calculation. It is concluded that the acceleration ellipsoid can be used to evaluate the expected maximum values of the forces acting on containers and lashing rods. Received: December 14, 2000 / Accepted: March 22, 2001     

人的失误模型在船舶溢油事故应急中的应用分析

船舶交通事故问题的预测一直是业内研究人员十分重视的研究课题。分别采用回归预测法、时间序列预测法、灰色理论预测法和贝叶斯统计预测法等不同方法,结合国内某港引航站近十多年来船舶引航总量和事故的实际情况,进行了比较分析和对未来情况予以预测。着重就贝叶斯方法在港口船舶引航风险预测中的运用进行了探讨。结论证明贝叶斯估计方法得到的结果具有良好的预测效果。     

An exploratory investigation of the impact of ramp metering on driver acceleration behavior

Ramp metering has been proven as an effective freeway management strategy; however, the impact of ramp metering on drivers' acceleration behavior has not been fully investigated. A better understanding of acceleration behavior changes with ramp metering is critical to the adequate design of ramp metering facilities. In this study, drivers' speed and acceleration data were collected at two representative metered ramps in Los Angeles, California. The speed and acceleration profiles under meter-on and meter-off scenarios were compared. Statistical results demonstrated that ramp metering affects drivers' acceleration behavior at ramp acceleration lane. It was found that at the metered ramp with short existing acceleration length, the average acceleration rate from ramp meter stop bar to 500 ft downstream under meter-on scenario (4.72 ft./s²) is approximately 40% higher than when meter-off (3.18 ft./s²). The design of acceleration lane length for metered on-ramps should therefore take into account the potential impacts of ramp metering on driver acceleration behavior.     

水下爆炸作用下船舱浮筏系统的冲击响应试验研究

设计了船舱浮筏系统的水下爆炸试验装置，测试了浅水域中爆炸的水下爆炸载荷，分析了存在结构反射时的冲击波和气泡脉动压力的幅值、比冲量和能量密度，指出以低频成分为主的气泡脉动压力，对舰船设备隔离系统的冲击响应产生重要的作用。并对水下爆炸载荷作用下船舱浮筏系统的冲击响应进行分析，其结果对于研究舰船设备的抗冲击性能具有参考价值。