Personal exposures to PM during short distance highway travel in India

Traffic is the largest contributor (37%) to urban air pollution in India. During commuting, passengers are significantly exposed to pollutants. We carried out a study on a National Highway (NH) in India to measure personal exposure to Particulate Matter (PM) in five travel modes. PM_2.5 concentrations showed the following trend: Bus > Car FA (fresh air mode of air condition) > Bus AC > Car > Car RC (re-circulation mode of air condition). Highest and lowest concentrations of PM₁₀ were observed in Bus (134 ± 47 µg m⁻³) and Car RC (20 ± 5 µg m⁻³), respectively. The exposures were highest at the rear seats during the Bus AC journeys. In Car FA, the contribution of PM₁ to total concentrations was dominant (61%). Travel modes explained highest variabilities in PM₁₀, PM_2.5 and PM₁ concentrations. In all travel modes, the highest particle counts were observed for PM_0.3–0.5. PM_>0.5–5.0 counts during Bus journeys were comparatively higher than remaining modes. Deposition doses of passengers were as high as 3.22 µg of PM₁₀ (in Bus), 0.66 µg of PM_2.5 (in Bus) and 0.06 µg of PM₁ (in Bus AC) during the ~1 h journey. Our study revealed that Car RC is the safest mode of travel, both in terms of personal exposures and PM depositions in respiratory system. The results from this study can be used to target efforts to reduce personal exposure of highway commuters.     

Constant speed optimal reciprocal collision avoidance

In this article, the Optimal Reciprocal Collision Avoidance (ORCA) algorithm is modified to make it work for speed constrained aircraft. The adaptation of ORCA to aircraft conflict resolution shows that when the speed norm is constrained, aircraft flying within the same speed range with small angle converging trajectories tend to remain on parallel tracks, preventing a resolution of the conflict. The ORCA algorithm is slightly modified to avoid this behavior. In the new algorithm called CSORCA (Constant Speed Optimal Reciprocal Collision Avoidance), the directions of the semi-plane used to calculate the conflict free maneuvers are modified when the relative speed vector is in the semi-circular part of the conflicting area. After explaining the reasons that make the original algorithm fail in the constant speed environment, the modification made on the algorithm is detailed and its impact on a simple example is shown. The new strategy is also compared to an Add-Up strategy close to the Airborne Separation Assurance System (ASAS) strategy found in the literature. Hundreds of fast time simulations are then performed to compare the two versions of the algorithm for different traffic densities in the horizontal plane. In these simulations the speed norm is first constrained. The aircraft can only change direction with a limited turning rate. Simulations with released speed constraints are then performed to compare the behavior of both algorithms in a more general environment. In all the scenarios tested, CSORCA is more efficient than ORCA to solve conflicts.     

Economic effects of air transport market liberalization in Africa

Although the aviation industry is increasingly becoming important for Africa’s economic development and integration, the ability of airlines to access foreign markets remains hindered by restrictive regulatory policies. Attempts have been made to fully liberalize the intra-African air transport market. Except for general assertions about the merits/demerits of liberalization, our empirical understanding of the welfare effects of such polices in Africa remains rudimentary. This study empirically measures the economic effects of air transport liberalization, mainly on two supply side variables: fare and service quality, measured as departure frequency. The empirical models evaluate how air fares and departure frequency respond to measures of openness in air services agreements, while controlling for other determinants. The results show up to 40% increase in departure frequency in routes that experienced some type of liberalization compared to those governed by restrictive bilateral air service agreements. Furthermore, there is a relatively larger increase in departure frequency in routes which experienced partial liberalization compared to fully liberalized ones. This can be explained by the diminishing marginal effect of progressive liberalization on departure frequency. While the effect of liberalization is substantial in improving service quality, there is no evidence of its fare reducing effect.     

The influence of integrated space–transport development strategies on air pollution in urban areas

The phenomenon of urban sprawl has strong impacts on transport performance and accessibility and causes an increase of air pollution. Effective control of urban sprawl requires an integrated approach comprising urban transport and land-use planning. Current research is insufficient to demonstrate the effects of urban sprawl on travel behavior and air pollution emission. The present paper examines the potential of an integrated approach on space–transport development strategies with the aim of increasing accessibility and reducing air pollution. A combination of space and transport strategies has been simulated for the rapidly expanding city of Surabaya. A comparative analysis of the impact of those cases indicates the promising potential alternatives to minimize the phenomenon. The transport options considered are combinations of Public Transport (PT), comprising Mass Rapid Transit (MRT), Light Rapid Transit (LRT), and Bus Rapid Transit (BRT). The options for urban structure include a compact zone development for the city, as formulated by the city planning agency, and a polycentric city set-up based on a job-housing balance aimed at minimizing the house-job distance. The results indicate that the polycentric city structure has the potential to make public transport work successfully for the city of Surabaya. This city structure creates a trip demand pattern which matches citizens’ PT preferences. Compared to the current situation, the combination of such a city structure with an expansion of PT systems would lead to a considerable improvement of transport performance, i.e. a PT mode share, a mean commute distance, and a significant reduction in emissions.     

Cycleways and footpaths: What separation is needed for equivalent air pollution dose between travel modes?

Cycling and walking are being promoted in many urban areas as alternatives to motorised transport for health, environmental, and financial reasons. The reduced congestion and resulting decrease in the overall amount of pollution reduced can be expected to result in health benefits for the community. However, active commuters, due to their increased respiration rates and often increased travel times can expect to receive larger doses of air pollution compared with those using motorised forms of transport. However, given the large dropoff in concentrations away from a road, it can be expected that significant reductions can be achieved even with relatively small increases in separation between the path of cyclists/pedestrians and motor vehicles.This study presents a simple methodology for calculating the separation needed for cyclists and pedestrians to experience the same air pollution dose as car commuters. An example is given based on carbon monoxide (CO) data collected in a field campaign consisting of a car driver, a cyclist and a pedestrian travelling on a 2600 metre loop of road in Auckland. For this case study, the estimated distance from the centreline needed for cyclists and pedestrians to receive an equivalent dose of CO as motorists was found to range from 5.8 to 14.2 m depending on the commuting mode and the dispersion state of the atmosphere at the site. This was equal to a CO concentration reduction of 0.1–0.14 ppm per metre. Recommendations on facility modifications and route selections have been made to make active mode commuting safer.     

Impact of service network topology on air transportation efficiency

Each stakeholder in the air transportation system has a different perspective on the performance efficiency metrics, making analysis of system-wide design options very difficult. This paper uses topological structures of service networks to examine trade-offs between efficiency metrics established around the passenger, airline, and air navigation service provider perspectives. The findings indicate that the scale-free type topologies are preferred under most of the metrics. However, with enough density, random topologies become more appealing with its high robustness feature and performance comparable to scale-free.     

Biofuels in aviation: Fuel demand and CO2 emissions evolution in Europe toward 2030

This article presents the results of a scenario-based study carried out at the European Commission’s Joint Research Centre aimed at analyzing the future growth of aviation, the resulting fuel demand and the deployment of biofuels in the aviation sector in Europe. Three scenarios have been produced based on different input assumptions and leading to different underlying patterns of growth and resulting volumes of traffic. Data for aviation growth and hence fuel demand have been projected on a year by year basis up to 2030, using 2010 as the baseline. Data sources are Eurostat statistics and actual flight information from EUROCONTROL. Relevant variables such as the number of flights, the type of aircrafts, passengers or cargo tonnes and production indicators (RPKs) are used together with fuel consumption and CO₂ emissions data. The target of the European Advanced Biofuels Flightpath to ensure the commercialization and consumption of 2 million tons of sustainably produced paraffinic biofuels in the aviation sector by 2020, has also been taken into account. Results regarding CO₂ emission projections to 2030, reveal a steady annual increase in the order of 3%, 1% and 4% on average, for the three different scenarios, providing also a good correlation compared to the annual traffic growth rates that are indicated in the three corresponding scenarios. In absolute values, these ratios correspond to the central, the pessimistic and the optimistic scenarios respectively, corresponding to 360 million tonnes CO₂ emissions in 2030, ranging from 271 to 401 million tonnes for the pessimistic and optimistic scenarios, respectively. This article also reports on the supply potential of aviation biofuels (clustered in HEFA/HVOs and biojet) based on the production capacity of facilities around the world and provides an insight on the current and future trends in aviation based on the European and national policies, innovations and state-of-the art technologies that will influence the future of sustainable fuels in aviation.     

Three-dimensional conflict count models for unstructured and layered airspace designs

This paper presents analytical models that describe the safety of unstructured and layered en route airspace designs. Here, ‘unstructured airspace’ refers to airspace designs that offer operators complete freedom in path planning, whereas ‘layered airspace’ refers to airspace concepts that utilize heading-altitude rules to vertically separate cruising aircraft based on their travel directions. With a focus on the intrinsic safety provided by an airspace design, the models compute instantaneous conflict counts as a function of traffic demand and airspace design parameters, such as traffic separation requirements and the permitted heading range per flight level. While previous studies have focused primarily on conflicts between cruising aircraft, the models presented here also take into account conflicts involving climbing and descending traffic. Fast-time simulation experiments used to validate the modeling approach indicate that the models estimate instantaneous conflict counts with high accuracy for both airspace designs. The simulation results also show that climbing and descending traffic caused the majority of conflicts for layered airspaces with a narrow heading range per flight level, highlighting the importance of including all aircraft flight phases for a comprehensive safety analysis. Because such trends could be accurately predicted by the three-dimensional models derived here, these analytical models can be used as tools for airspace design applications as they provide a detailed understanding of the relationships between the parameters that influence the safety of unstructured and layered airspace designs.     

Air pollution dynamics and the need for temporally differentiated road pricing

In this paper we investigate the effects of the temporal variation of pollution dispersion, traffic flows and vehicular emissions on pollution concentration and illustrate the need for temporally differentiated road pricing through an application to the case of the congestion charge in Stockholm, Sweden. By accounting explicitly for the role of pollution dispersion on optimal road pricing, we allow for a more comprehensive view of the economy–ecology interactions at stake, showing that price differentiation is an optimal response to the physical environment. Most congestion charges in place incorporate price bands to mitigate congestion. Our analysis indicates that, to ensure compliance with air quality standards, such price variations should also be a response to limited pollution dispersion.     

Maximizing airborne delay at no extra fuel cost by means of linear holding

This paper introduces a linear holding strategy based on prior works on cruise speed reduction, aimed at performing airborne delay at no extra fuel cost, as a complementary strategy to current ground and airborne holding strategies. Firstly, the equivalent speed concept is extended to climb and descent phases through an analysis of fuel consumption and speed from aircraft performance data. This gives an insight of the feasibility to implement the concept, differentiating the case where the cruise flight level initially requested is kept and the case where it can be changed before departure in order to maximize the linear holding time. Illustrative examples are given, where typical flights are simulated using an optimal trajectory generation tool where linear holding is maximized while keeping constant the initially planned fuel. Finally, the effects of linear holding are thoroughly assessed in terms of the vertical trajectory profiles, range of feasible speed intervals and trade-offs between fuel and time. Results show that the airborne delay increases significantly with nearly 3-fold time for short-haul flights and 2-fold for mid-hauls to the cases in prior works.