凌志400型轿车安全气囊的检修

介绍了丰田凌志４００型轿车安全气囊的组成、工作原理、故障代码的读取和清除，以及安全气囊检修的注意事项。     

Experimental design influences on stated choice outputs: An empirical study in air travel choice

Discrete choice experiments are conducted in the transport field to obtain data for investigating travel behaviour and derived measures such as the value of travel time savings. The multinomial logit (MNL) and other more advanced discrete choice models (e.g., the mixed MNL model) have often been estimated on data from stated choice experiments and applied for planning and policy purposes. Determining efficient underlying experimental designs for these studies has become an increasingly important stream of research, in which the objective is to generate stated choice tasks that maximize the collected information, yielding more reliable parameter estimates. These theoretical advances have not been rigorously tested in practice, such that claims on whether the theoretical efficiency gains translate into practice cannot be made. Using an extensive empirical study of air travel choice behaviour, this paper presents for the first time results of different stated choice experimental design approaches, in which respective estimation results are compared. We show that D-efficient designs keep their promise in lowering standard errors in estimating, thereby requiring smaller sample sizes, ceteris paribus, compared to a more traditional orthogonal design. The parameter estimates found using an orthogonal design or an efficient design turn out to be statistically different in several cases, mainly attributed to more or less dominant alternatives existing in the orthogonal design. Furthermore, we found that small designs with a limited number of choice tasks performs just as good (or even better) than a large design. Finally, we show that theoretically predicted sample sizes using the so-called S-estimates provide a good lower bound. This paper will enable practitioners in better understanding the potential benefits of efficient designs, and enables policy makers to make decisions based on more reliable parameter estimates.     

Much Ado about Nothing? - An analysis of economic impacts and ecologic effects of the EU-emission trading scheme in the aviation industry

From 2012 on, all CO₂ emissions from flights departing from or arriving at airports within the European Union have to be offset. We analyze the economic and ecological impacts that are caused by an inclusion of the aviation industry into the proposed emissions trading scheme (ETS). Building on the now fixed system design we employ a simulation model to estimate the impacts of the scheme. Our results indicate that financial impacts are highly dependant on external settings, such as allowance prices and demand growth. We show that the financial burden on the aviation industry will be rather modest in the first years after the introduction of the system and therefore induce only low competition distortions. Likewise, emission reductions within air transportation will be comparably low. While aviation will induce a decline of emissions in other sectors, significant absolute reductions within air transportation can only be reached by a more restrictive system design.     

Estimating flight-level price elasticities using online airline data: A first step toward integrating pricing,demand, and revenue optimization

We estimate flight-level price elasticities using a database of online prices and seat map displays. In contrast to market-level and route-level elasticities reported in the literature, flight-level elasticities can forecast responses in demand due to day-to-day price fluctuations. Knowing how elasticities vary by flight and booking characteristics and in response to competitors’ pricing actions allows airlines to design better promotions. It also allows policy makers the ability to evaluate the impacts of proposed tax increases or time-of-day congestion pricing policies. Our elasticity results show how airlines can design optimal promotions by considering not only which departure dates should be targeted, but also which days of the week customers should be allowed to purchase. Additionally, we show how elasticities can be used by carriers to strategically match a subset of their competitors’ sale fares. Methodologically, we use an approach that corrects for price endogeneity; failure to do so results in biased estimates and incorrect pricing recommendations. Using an instrumental variable approach to address this problem we find a set of valid instruments that can be used in future studies of air travel demand. We conclude by describing how our approach contributes to the literature, by offering an approach to estimate flight-level demand elasticities that the research community needs as an input to more advanced optimization models that integrate demand forecasting, price optimization, and revenue optimization models.     

Energy savings in transport

A decade of increasing Federal attention to urban transportation needs has culminated in the 1970 Urban Mass Transportation Assistance Act. This Act is intended to provide 10 thousand million dollars over the next 12 years in Federal assistance money to urban public transportation systems. This paper examines the needs of selected U.S. cities as a basis for (1) understanding the vast, various and complex transportation needs of urban areas throughout the country, and (2) assessing the sufficiency of these funds. The sample cities have been placed into three broad categories based on the state of development of their transportation systems. In Category I cities, the essential need is to ensure the survival of bus systems for the use of non‐drivers, or to provide some other viable alternative to the automobile; in Category II cities, the primary needs are to relieve auto congestion and to improve public transportation components, while in Category III cities, the primary need is massive investment to improve and to extend public transportation facilities. It is concluded that the presently intended Federal funding level for transportation will not meet the financial requirements of the Category III cities.     

A parameterized consideration set model for airport choice: an application to the San Francisco Bay Area

Airport choice is an important air travel-related decision in multiple airport regions. This paper proposes the use of a probabilistic choice set multinomial logit (PCMNL) model for airport choice that generalizes the multinomial logit model used in all earlier airport choice studies. The paper discusses the properties of the PCMNL model, and applies it to examine airport choice of business travelers residing in the San Francisco Bay Area. Substantive policy implications of the results are discussed. Overall, the results indicate that it is important to analyze the choice (consideration) set formation of travelers. Failure to recognize consideration effects of air travelers can lead to biased model parameters, misleading evaluation of the effects of policy action, and a diminished data fit.     

美海军协同作战系统的组成与发展

协同作战系统是美国海军实现网络中心作战思想的关键环节，该系统的投入使用将有效提高航母战斗群的对空防御作战能力。本文对该系统的组成，功能及发展趋势进行介绍和分析。     

Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system

Air suspension systems have been implemented in various commercial vehicles, such as buses and special purpose trucks, because of the comfortable ride and easy height control. An evaluation of the durability of vehicle parts has been required for service life and safety starting in the early stages of design. The cyclic load applied to the vehicle can cause fatigue failure of parts, such as the suspension frame. This paper presents a method to predict the fatigue life of the suspension frame at the design stage of the air suspension system used in a heavy-duty vehicle. To estimate the fatigue life using the SN method, the Dynamic Stress Time History (DSTH) is necessary for the part of interest. DSTH can be obtained from the results of the flexible body dynamic analysis using the Belgian road simulation and the Modal Stress Recovery (MSR) method. Furthermore, the reliability of the predicted fatigue life can be evaluated by considering the variations in material properties. The probability and distribution of the expected life cycle can be obtained using experimental design with a minimum number of simulations. The advantage of using statistical methods to evaluate the life cycle is the ability to predict replacement time and the probability of failure of mass-produced parts. This paper proposes a rapid and simple method that can be effectively applied to the design of vehicle parts.     

Modeling NOx and NO2 emissions from mobile sources: A case study for Hamilton, Ontario, Canada

This study characterizes the dispersion of emissions of oxides of nitrogen and nitrogen dioxide from traffic sources in the Hamilton census metropolitan area. The Integrated Model of Urban Landuse and Transportation for Environmental Analysis software was used to estimate emissions of oxides of nitrogen from traffic sources. The Air Pollution Model, was used to simulate dispersion of the traffic emissions over the city. The models account for the two primary wind directions in this region – the prevailing southwest and a secondary northeast direction. The results show a prominent triangle of high pollution defined by major roads and highways along the periphery of the Hamilton Harbour, at peak-hour. With southwest winds, residential areas along the northern shoreline of the Harbour are affected, while the western sections of the city are affected by northeast winds. High concentrations are persistent in some areas, for both wind directions. The resulting dispersion surfaces characterize the spatial distribution of traffic emissions and thus provide a means of assessing population exposure over the Hamilton area.     

H轮副机配气机构的改进尝试

此文通过对H轮副机机损的故障分析,阐述了由于气阀机构的磨损而发生故障的机理,并提出了改进措施。