我国汽车行业电子商务发展模式研究

文章针对目前国内汽车电子商务模式的几点争论，结合中国电子商务的现实环境和汽车行业的实际情况。进行了充分论证。并借鉴国外汽车行业电子商务发展模式．提出了适台鼗国汽车行业电子商务的三阶段发展模式。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

R/S分析法在盾构下穿机场过程中的地表变形规律研究

为保证机场的正常运营,在盾构下穿机场的施工过程中,对地表沉降变形控制的要求较高,因此对穿越过程中的施工控制和变形规律研究具有重要意义。首先,基于盾构下穿机场的工程条件,分析盾构下穿过程中的风险,并提出相应的控制措施;同时,根据现场监测数据,分析盾构下穿机场过程中的地表沉降变形规律,并利用R/S分析法对地表沉降的发展趋势进行研究。结果表明:盾构施工引起的机场地表变形均在控制值范围以内,且各监测点在不同序列条件下的Hurst指数均大于0.5,具有沉降持续减弱的趋势,验证下穿过程中风险控制措施的有效性,为类似下穿机场的盾构施工提供一定的实践经验,也为盾构施工引起的地表沉降变形规律研究提供参考。     

船舶低硫柴油系统设计的分析与优化

就新辟航线首制船“汉亚直达”集装箱船的低硫柴油系统,叙述了船舶低硫柴油系统的设计经验,从当前国内外对船用燃油硫含量的要求、应对方案到船舶低硫柴油冷却方式选择、低硫柴油冷却系统设计、高/低硫柴油转换、使用低硫柴油风险分析及处理等方面进行详细叙述,为业内同行提供参考。     

The same mode again? An exploration of mode choice variability in Great Britain using the National Travel Survey

The main focus of travel behaviour research has been explaining differences in behaviour between individuals (interpersonal variability) with less emphasis given to the variability of behaviour within individuals (intrapersonal variability). The subject of this paper is the variability of transport modes used by individuals in their weekly travel. Our review shows that previous studies have not allowed the full use of different modes in weekly travel to be taken into account, have used categorical variables as simple indicators of modal variability and have only considered a limited set of explanatory indicators in seeking to explain modal variability. In our analysis we use National Travel Survey data for Great Britain. We analyse modal variability with continuous measures of modal variability (Herfindahl–Hirschman Index, the difference in mode share between the primary and secondary mode, the total number of modes used). Taking inspiration from Hägerstrand (1970), we conceive that modal variability is determined by different types of spatial mobility constraints and find that reduced modal variability is predicted for having mobility difficulties, being aged over 60, being non-white, working full-time, living in smaller settlement, lower household income, having regular access to a car, having no public transport pass/season ticket and not owning a bicycle. The findings can support a change in perspective in transport policy from encouraging people to replace the use of one mode with another to encouraging people to make a change to their relative use of different transport modes.     

Policy packages for modal shift and CO2 reduction in Lille,France

This paper proposes different policy scenarios to cut CO₂ emissions caused by the urban mobility of passengers. More precisely, we compare the effects of the ‘direct tool’ of carbon tax, to a combination of ‘indirect tools’ – not originally aimed at reducing CO₂ (i.e. congestion charging, parking charges and a reduction in public transport travel time) in terms of CO₂ impacts through a change in the modal split. In our model, modal choices depend on individual characteristics, trip features (including the effects of policy tools), and land use at origin and destination zones. Personal “CO₂ emissions budgets” resulting from the trips observed in the metropolitan area of Lille (France) in 2006 are calculated and compared to the situation related to the different policy scenarios. We find that an increase of 50% in parking charges combined with a cordon toll of €1.20 and a 10% travel time decrease in public transport services (made after recycling toll-revenues) is the winning scenario. The combined effects of all the policy scenarios are superior to their separate effects.     

Tyre/road noise damping characteristics using nomographs and fundamental vibroacoustical relationships

Several studies have successfully developed laboratory and field measurement techniques to estimate tyre/road noise damping characteristics. However, laboratory–field noise correlations of pavement types in the form of nomographs is essential to cognize the pavements’ acoustical properties from a practical perspective. A toolkit that readily provides field tyre/road noise intensity of different pavement materials is needed. Thus, the main objective of this study was to develop nomographs with relationships for tyre/road noise versus pavement materials’ viscoelastic–vibroacoustical properties. Isothermal and isochronal nomographs of phase angle–tyre/road noise as toolkits were developed based upon well-established phase angle and noise intensities typical of mixtures, making the nomograph correlations very authentic, realistic, and novel along with benefit to predict tyre/road noise at any desired temperature and traffic speed (or frequency) combination. This study is envisaged to benefit in the discernment of road materials’ damping capabilities from vibroacoustical and field noise–viscoelastic relation aspects.     

Capturing correlation with a mixed recursive logit model for activity-travel scheduling

Representing activity-travel scheduling decisions as path choices in a time–space network is an emerging approach in the literature. In this paper, we model choices of activity, location, timing and transport mode using such an approach and seek to estimate utility parameters of recursive logit models. Relaxing the independence from irrelevant alternatives (IIA) property of the logit model in this setting raises a number of challenges. First, overlap in the network may not fully characterize perceptual correlation between paths, due to their interpretation as activity schedules. Second, the large number of states that are needed to represent all possible locations, times and activity combinations imposes major computational challenges to estimate the model. We combine recent methodological developments to build on previous work by Blom Västberg et al. (2016) and allow to model complex and realistic correlation patterns in this type of network. We use sampled choices sets in order to estimate a mixed recursive logit model in reasonable time for large-scale, dense time-space networks. Importantly, the model retains the advantage of fast predictions without sampling choice sets. In addition to estimation results, we present an extensive empirical analysis which highlights the different substitution patterns when the IIA property is relaxed, and a cross-validation study which confirms improved out-of-sample fit.     

Traffic and emissions impact of congestion charging in the central Beijing urban area: A simulation analysis

Congestion charging is being considered as a potential measure to address the issue of substantially increased traffic congestion and vehicle emissions in Beijing. This study assessed the impact of congestion charging on traffic and emissions in Beijing using macroscopic traffic simulation and vehicle emissions calculation. Multiple testing scenarios were developed with assumptions in different charging zone sizes, public transit service levels and charging methods. Our analysis results showed that congestion charging in Beijing may increase public transit use by approximately 13%, potentially reduce CO and HC emissions by 60–70%, and reduce NOx emissions by 35–45% within the charging zone. However, congestion charging may also result in increased travel activities and emissions outside of the charging zone and a slight increase in emissions for the entire urban area. The size of charging zone, charging method, and charging rate are key factors that directly influence the impact of congestion charging; improved public transit service needs to be considered as a complementary approach with congestion charging. This study is used by Beijing Transportation Environment and Energy Center (BTEC) as reference to support the development of Beijing’s congestion charging policy and regulation.