米勒循环结合可变涡轮增压优化柴油机性能的仿真与试验研究

在开发一款机车柴油机过程中,利用AVL BOOST软件对柴油机工作过程进行了仿真计算,计算了不同米勒强度和不同喷油正时条件下柴油机的性能参数。根据计算结果,排除了弱米勒的方案。针对强米勒和中米勒,开展了试验研究,通过调整喷油定时、增压压力设定、共轨喷射压力,进行了多方案试验研究,试验结果表明,强米勒方案虽然可以有效降低Nox排放,但是带来PM排放升高和涡轮前排气温度升高的问题,中米勒虽然降低Nox排放的效果弱于强米勒,但是能获得比较满意的PM排放,且涡轮前排气温度远低于强米勒,综合各方面性能参数的比较结果,在满足排放要求的前提下,中米勒为优选方案。     

考虑健康损失的路阻模型的构建

运用高斯烟羽模型计算机动车尾气排放量,然后利用支付意愿法定量分析健康损失,同时考虑延误和健康损失构建考虑健康损失的路阻模型。根据实例,分别使用Transcad和新的路阻模型计算出2个路阻,并进行交通分配。结果显示2次交通分配的路网流量不同,表明考虑健康损失的路阻模型影响了人们的出行选择,可有效解决主干路拥挤,增加次干路车流量,协调整个路网车流量均衡,提高路网交通效率。     

涌浪条件下斜坡式防波堤堤脚块石稳定性

海外港口工程大部分位于以涌浪为主的海域,防波堤在涌浪作用下的稳定性尚未得到全面认识。对于斜坡堤,除了护面对其稳定性至关重要外,堤脚对其稳定性也很重要。以某一具体港口防波堤工程为例,通过波浪断面和局部整体物理模型试验,对涌浪作用下斜坡堤堤脚块石的稳定性进行了研究。根据试验结果,对比正向和斜向波浪作用下斜坡堤堤脚块石的稳定性结果,重点分析了斜向波浪作用下斜坡堤堤头圆弧段堤脚块石发生破坏的原因及其随入射波浪周期和水位的变化关系,并对原方案堤脚进行了优化。     

重庆市内河船舶污染物排放现状及LNG动力船舶推广效益分析

重庆地处长江上游经济带核心地区,水运发达,随着客货运量逐年增加,通行的内河船舶尾气排放严重影响港口及航道附近大气环境,已成为重庆大气污染的主要来源之一,颗粒物、NO_x的排放分别占重庆市总排放的4.3%、21.9%,SO_2占年排放的7.4%(14.8%。在大气环境问题日益严峻的情况下,LNG动力船舶因其可明显降低排气污染物,越发受到社会关注,对重庆市单LNG动力示范船舶尾气排放进行实测,对比柴油动力船舶,颗粒物、NO_x、SO_2减排显著,减排率分别达99.94%、72.69%、100%。因此,LNG动力船舶的推广表现出明显的环境效益,同时,综合分析了当前LNG动力船舶推广存在问题及困难。     

Efficiency evaluation and PM emission reallocation of China ports based on improved DEA models

The emission of particulate matter (PM) and other atmospheric pollutants in port operations and shipping have caused a huge negative impact on the environment. Consequently, how to evaluate the environmental efficiency of ports and put forward corresponding countermeasures on this basis is becoming a more important issue than ever before from the perspectives of the government, academia, and society. We construct three data envelopment analysis (DEA) models to evaluate the environmental efficiency of ports under the circumstances of environmental control, non-environmental control and PM emission through inter-ports cooperation. The innovation of the DEA models constructed in this paper lies in: (1) Setting environmental control parameters to uniformly manipulate the situations of environmental control and non-environmental control, etc.; (2) Allowing non-equal proportional change of input index, expected output and non-expected output index; (3) Setting preference coefficients for ports to admit favorable decisions; (4) Providing a distance formula of expected output for PM emission reallocation. Further, data from 11 major ports in China are collected to compare the expected output under different PM emission standards assuming the situation of environmental control and non-environmental control, port cooperation, and non-cooperative sewage discharge. The empirical results show that: (1) Ports in the eastern China (Shanghai, Ningbo, and Nanjing) have higher port efficiency; (2) Port cooperation can improve the overall expected output but it will lose its edge with the improvement of PM emission standards. (3) Ports follow the same trend of output loss regardless of favorable decisions. In the end, the author makes a summary, puts forward relevant policy suggestions and makes the recommendation for future research.     

Decouple transport CO2 emissions from China’s economic expansion: A temporal-spatial analysis

China’s transport industry is energy intensive and high-polluting. While with the surging urbanization and the development of service industry, China’s economic relies more and more on the transport sector. Therefore, exploring the relationship between transport energy-related carbon emission (TECE) and economic development is crucial to the realization of China’s “Post Paris” mitigation target. The paper carries out a decoupling research between TECE and Gross domestic product (GDP) at both national level and province level based on Logarithmic Mean Divisia Index (LMDI) decomposition analysis with the extended Kaya identity and Tapio decoupling model. The model quantifies eight factors’ effects on the relationship with focusing on external macro socio-economic related factors (i.e., spatial pattern, urbanization, per capita service industry output value, reciprocal of the service industry’s share of GDP, and demographic variable) successfully. The key conclusions are indicated as follows: (1) the national decoupling status was extensive coupling during 2004–2010 and then weak decoupling during 2010–2016. The progress can be attributed to the decline of energy intensity. (2) Per capita service output was always the prominent factor to promote carbon emissions growth in different time periods and provinces with inhibiting the advancement of decoupling process, followed by urbanization. (3) Scenario analysis shows that with the continuous growth of traffic demand and the promotion of urbanization, improving energy efficiency has become the key link to realize the decoupling between China’s TECE and its economy.     

汽车排放污染及净化对策研究

阐述汽车排放污染物的成分及其危害,介绍新排放法规Ⅰ型、Ⅲ型、Ⅳ型试验限值,重点分析汽车的5项排放影响因素及其净化措施。     

The effectiveness of a European speed limit versus an international bunker-levy to reduce CO2 emissions from container shipping

In the fight to reduce CO₂ emissions from international shipping, a bunker-levy is currently under consideration at the International Maritime Organization (IMO). Faced with the inability of the IMO to reach an agreement in the short term, the European Commission is now contemplating a unilateral measure of a speed limit for all ships entering European Union (EU) ports. This paper argues that this measure is counterproductive for two reasons. Firstly, because it may ultimately generate more emissions and incur a cost per ton of CO₂ which is more than society is willing to pay. Secondly, because it is sub-optimal compared to results obtained if an international bunker-levy was to be implemented. These elements are illustrated using two direct transatlantic services operated in 2010.     

固态胺纤维制备及在密闭舱内吸附CO2性能研究

以聚丙烯腈纤维(PAN)为基体,通过水解、酰氯化及与聚乙烯亚胺(PEI)接枝反应制备得到多胺基型固态胺纤维.应用红外光谱仪、热重分析仪及扫描电子显微镜表征了纤维的官能团结构、热稳定性及表面微观形貌.在温度25.0℃、相对湿度80%、初始CO2浓度1.0%的条件下,测得纤维在30 min内对CO2的吸附量可达154.4 g/kg;105℃ 水蒸气再生10 min,循环吸附再生50次,纤维的再生效率为98.3%.     

基于正交设计的船用柴油机燃烧系统参数匹配及优化

为研究柴油机燃烧系统参数匹配对柴油机动力和排放性能的影响,首先分别利用AVL_BOOST和AVL_FIRE仿真软件建立4190ZLC-2型船用柴油机整机模型和缸内燃烧高压循环模型,然后基于已建模型应用正交试验设计方法安排柴油机进气系统、喷油系统和燃烧室结构尺寸参数匹配仿真计算。研究结果表明,通过极差分析可以得出燃烧系统参数对4190ZLC-2型柴油机性能的影响主次顺序。以柴油机指示功率为评价指标时,参数组合0.26 mm-28°CA-160°-0.9-145 mm-2.6 mm-22 mm(喷孔直径-喷油提前角-油束夹角-涡流比-喉口直径-凸台高度-凹坑半径)对应的指示功率为63.40 k W,比原机仿真值高15%;以NOX排放为评价指标时,参数组合0.30 mm-24°CA-140°-0.4-135 mm-6.6 mm-14 mm(喷孔直径-喷油提前角-油束夹角-涡流比-喉口直径-凸台高度-凹坑半径)对应的NOX排放质量分数为0.015 7%,比原机仿真值低30.2%。