微机控制点火系的检修方法

微机控制点火系的种类有3种,然而根据其结构设计不同又可以把点火系统分为6种,其检修方法各有不同,本文重点介绍点火系统的具体检测维修方法。     

广州本田雅阁轿车空调系统的检修

给出广州本田雅阁轿车空调系统在车上的布置情况及控制电路图,具体介绍其电动机的检修、继电器的检测、功率晶体管与电子控制器的检修及空调系统的故障自诊断,并围绕这4部分内容分别展开探讨。     

汽车防追尾碰撞数学模型研究

为了提高车辆在高速行驶状态下的主动安全性能,研究了处于追尾行驶状态的本车与前车的运动学特征;针对前车的不同运动状态分别推导出了跟车距离的计算模型并分析了模型中3个关键参数的随机性和动态性,对制动迟滞时间提出了基于模糊推理的确定方法,对本车制动减速度和前车的运动加速度提出了比较实用的动态测算公式;另外,研究了防追尾碰撞的控制与执行,建立了动态调整安全制动停车距离的神经网络模型,提出了基于危险裕度判别的安全控制方法。     

喷射混凝土在隧道支护中的应用

根据隧道合同段的具体实际情况及施工工艺,通过合理选择喷射混凝土的原材料,精确的配合比设计,正确选择喷射机械和工艺流程,严格控制喷射施工质量,使喷射混凝土作为围岩开挖后的主要支护构件,达到设计的作用效果.     

基于WBS与多层次模糊综合评估的桥梁检测评估方法的研究

介绍了WBS方法在桥梁检测评估中的应用,提出了WBS方法与多层次模糊综合评估相结合的桥梁检测评估方法,并用实际工程加以了分析及验证.将WBS方法与多层次模糊综合评估相结合,使桥梁评估既便捷又科学,提高了桥梁检测评估的可靠度.     

车辆折算系数的分类及算法

提出了标准车的选择原则:车长等于约定的长度;当交通流密度很小时,以道路设计速度行驶;驾驶员遵守交通规则。定义了微观车辆折算系数:交通流全部由标准车组成时的流量与交通流全部由某种车组成时的流量之比。定义了聚类车辆折算系数:组成该类车型的所有自然车的微观折算系数与组成比例的乘积之和。定义了宏观车辆折算系数:组成混合交通流的所有自然车的微观折算系数与组成比例的乘积之和。计算了这三种车辆折算系数。     

赣江大桥公路桥病害检测与安全评估

首先对赣江大桥公路桥进行病害调查,评定全桥各部位损伤状态。根据评定结果,再对材料退化、结构损伤与受力性能进行实桥测试。应用断裂力学方法,采用观测和超声波探测方法确定初始裂纹尺寸,通过裂纹扩展模拟得出临界杆件的剩余寿命。综合实测数据与理论分析,评估该桥使用安全性和剩余寿命,并建议维护加固措施。     

工程测量课程实训环节教学改革及质量控制方法探讨

如何在有限的课内实训环节教学过程中,有效地组织开展实训项目,充分完成好实训环节任务布置、方案设计、素材准备、组织实施、成果检查和质量控制等问题,如何实现"教学过程"和"生产过程"的准确对接,如何真正地实训"教、学、做一体化",是提高课程实训环节教学效果、提高测绘专业实训教学效果的重要途径。本文针对工程测量课程,主要探讨课内实训环节教学方法改革和质量控制方法。     

Autonomous cars: The tension between occupant experience and intersection capacity

Systems that enable high levels of vehicle-automation are now beginning to enter the commercial marketplace. Road vehicles capable of operating independently of real-time human control under an increasing set of circumstances will likely become more widely available in the near future. Such vehicles are expected to bring a variety of benefits. Two such anticipated advantages (relative to human-driver vehicle control) are said to be increased road network capacity and the freeing up of the driver-occupant’s time to engage in their choice of leisurely or economically-productive (non-driving) tasks.In this study we investigate the implications for intersection capacity and level-of-service of providing occupants of automated (without real-time human control), autonomously-operating (without vehicle-to-X communication) cars with ride quality that is equivalent (in terms of maximum rates of longitudinal and lateral acceleration) to two types of rail systems: [urban] light rail transit and [inter-urban] high-speed rail. The literature suggests that car passengers start experiencing discomfort at lower rates of acceleration than car drivers; it is therefore plausible that occupants of an autonomously-operating vehicle may wish to instruct their vehicle to maneuver in a way that provides them greater ride comfort than if the vehicle-control algorithm simply mimicked human-driving-operation.On the basis of traffic microsimulation analysis, we found that restricting the dynamics of autonomous cars to the acceleration/deceleration characteristics of both rail systems leads to reductions in a signalized intersection’s vehicle-processing capacity and increases in delay. The impacts were found to be larger when constraining the autonomous cars’ dynamics to the more-restrictive acceleration/deceleration profile of high-speed rail. The scenarios we analyzed must be viewed as boundary conditions, because autonomous cars’ dynamics were by definition never allowed to exceed the acceleration/deceleration constraints of the rail systems. Appropriate evidence regarding motorists’ preferences does not exist at present; establishing these preferences is an important item for the future research agenda.This paper concludes with a brief discussion of research needs to advance this line of inquiry.     

Travel time estimation from sparse floating car data with consistent path inference: A fixed point approach

Estimation of urban network link travel times from sparse floating car data (FCD) usually needs pre-processing, mainly map-matching and path inference for finding the most likely vehicle paths that are consistent with reported locations. Path inference requires a priori assumptions about link travel times; using unrealistic initial link travel times can bias the travel time estimation and subsequent identification of shortest paths. Thus, the combination of path inference and travel time estimation is a joint problem. This paper investigates the sensitivity of estimated travel times, and proposes a fixed point formulation of the simultaneous path inference and travel time estimation problem. The methodology is applied in a case study to estimate travel times from taxi FCD in Stockholm, Sweden. The results show that standard fixed point iterations converge quickly to a solution where input and output travel times are consistent. The solution is robust under different initial travel times assumptions and data sizes. Validation against actual path travel time measurements from the Google API and an instrumented vehicle deployed for this purpose shows that the fixed point algorithm improves shortest path finding. The results highlight the importance of the joint solution of the path inference and travel time estimation problem, in particular for accurate path finding and route optimization.