Hadoop在客票日志处理系统中的应用

借助Hadoop技术提出了一种新的架构,用于处理客票系统中产生的海量交易日志.首先将多个业务的数据收集起来并以一定的格式存储在hase与hive中,然后对平台中的数据进行建模分析从中提取出有价值的关键业务信息.目前该系统已经开发完成,切实提高了客票系统维护与运营的水平和效率.     

Recycling of aluminum from fibre metal laminates

Recycling of aluminum alloy scrap obtained from delaminated fibre metal laminates (FMLs) was studied through high temperature refining in the presence of a salt flux. The aluminum alloy scrap contains approximately mass fraction w(Cu) = 4.4%, w(Mg) = 1.1% and w(Mn) = 0.6% (2024 aluminum alloy). The main objective of this research is to obtain a high metal yield, while maintaining its original alloy compositions. The work focuses on the metal yield and quality of recycled Al alloy under different refining conditions. The NaCl-KCl salt system was selected as the major components of flux in the Al alloy recycling. Two different flux compositions were employed at NaCl to KCl mass ratios of 44:56 and 70:30 respectively, based on either the eutectic composition, or the European preference. Different additives were introduced into the NaCl-KCl system to study the effect of flux component on recycling result. Although burning and oxidation loss of the alloying elements during re-melting and refining take place as the drawbacks of conventional refining process, the problems can be solved to a large extent by using an appropriate salt flux. Experimental results indicate that Mg in the alloy gets lost when adding cryolite in the NaCl-KCl salt system, though the metal yield can reach as high as 98%. However, by adding w(MgF₂) = 5% into the NaCl-KCl salt system (instead of using cryolite) all alloying elements were well controlled to its original composition with a metal yield of almost 98%.     

Effect of Gr Content and Hot Extrusion on Tensile Properties of （Nano-SiCp~-Gr）/Cu Composites Fabricated by Powder Metallurgy

Novel hybrid Cu matrix composites reinforced by graphite (Gr) particle with volume fraction of 5%?C15% and nano-SiC particle (nano-SiCp) with volume fraction of 3% have been prepared by powder metallurgy. The results show that Gr and nano-SiCp distribute uniformly in the Cu matrix. With increasing the volume fraction of Gr, the tensile strength of the composites decreases from 114 to 51MPa and the elastic modulus decreases from 75 to 60GPa. Compared with the sintered composites, the tensile properties including elastic modulus, tensile strength, yield strength and tensile elongation of the hot-extruded (nano-SiCp+Gr)/Cu composites are improved greatly due to higher relative density of the composites and more uniform distribution of Gr and nano-SiCp, in addition to finer grain size of the matrix as a result of dynamic recovery and recrystallization which occur during hot extrusion process.     

Fabrication of a Novel Porous Poly（Vinylidene Fluoride） Blend Five-Bore Membrane for Wastewater Treatment

Porous poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) blend five-bore hollow fiber membranes are prepared by wet phase inversion methods. In spinning these PVDF hollow fibers, N, N-dimethylacetamide (DMAc) and polyvinyl pyrrolidone (PVP) are used as the solvent and the non-solvent additive, respectively. The external coagulant uses water. The internal coagulants use water and DMAc-water solutions. The membranes are characterized in terms of water flux and molecular weight cut-off for the wet membranes. The cross-sectional structures are examined by scanning electron microscopy (SEM). The effects of polymer concentration and the internal coagulant on the permeation properties and membrane structures are examined keeping the bore liquid flow and air-gap constants. Relative high flux, rejection and strengh PVDF five-bore hollow fiber membranes could be prepared from the polymer concentration in dope solution at 17% of mass fraction, the air gap distance of 14 cm, and using 10% of mass fraction of DMAc solution as the internal coagulant at 13mL/min of flow.     

Photothermal effect for Fe3O4 nanoparticles contained in micelles induced by near-infrared light

Near infrared (NIR) light induced photothermal effect for Fe₃O₄ nanoparticles, contained in Pluronic F127 micelles, has been studied and it exhibits high photothermal converting efficiency. Heat is found to be rapidly generated in micelles containing Fe₃O₄ nanoparticles by NIR laser irradiation. Upon irradiation at 808 nm light and with mass concentration of Fe₃O₄ nanoparticles in 4 g/L, the micelle temperature increase is higher than 34°C for 10min irradiation. The maximum temperature of micelles containing Fe₃O₄ nanoparticles in 4 g/L reaches 62°C.     

Survey on arteriovenous fistula in maintenance hemodialysis patients with type 2 diabetic nephropathy

This paper summed up the characteristics of native arteriovenous fistulas (AVFs) in maintenance hemodialysis patients with type 2 diabetic nephropathy (DN) in Chinese hemodialysis centers. A survey was conducted on AVF in maintenance hemodialysis patients with type 2 DN. A total of 224 cases of maintenance hemodialysis patients were included in this study, among which, 65 cases in DN group, 33 cases in diabetes mellitus (DM) group and 126 cases in non-diabetic control (C) group. Hemoglobin, albumin, blood urea nitrogen, parathyroid hormone and calcium-phosphate product of the three groups of patients were not significantly different. Glycated hemoglobin A1c of DN group and DM group was not significant different. AVF life of (28.7 ± 10.0) months in DN group was significantly shorter than that of (36.5 ± 19.4) months in C group (statistic probability P <0.01), and AVF life of (32.5 ± 10.1) months in DM group (P <0.05) was also shorter than that in C group, while there was no significant difference in AVF life between DN group and DM group. Proportion of upper arm fistula in DN patients (11/65) was significantly higher than that in C group (6/123, P < 0.01). Life of AVF in patients with DN was relatively short, with more times of angioplasty and greater possibility of selecting upper arm internal fistula.     

基于拟T-S模糊模型的网络化控制系统稳定性分析

综合考虑网络化控制系统（NCS）出现时延和丢包问题,提出一种基于拟T-S模糊模型.以时延和丢包出现的概率作为隶属度,并根据丢包出现在系统中的不同环节,分别构造相应的系统模型,再利用线性矩阵不等式（LMI）方法证明系统的稳定性,并通过对一个二阶倒立摆系统的数值分析说明方法的可行性,从而为网络化控制系统的分析与设计提供了新方法.