Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

铁路货物追踪系统的构建

铁路货物运输组织是铁路工作的一个核心内容,铁路货物追踪系统的设计与实现能够为货主提供更好、更快的服务,同时加快和保障铁路货运工作的组织。通过对铁路整车货物运输的流程分析,制定货物追踪系统的目标,分析系统功能。通过数据的采集和信息共享平台的建立,提出货物追踪系统的实现途径。     

A new model for temporal–spatial stochastic analysis of vehicle–track coupled systems

The vehicle–track coupled system has a random nature in the time–space domain. This paper proposes a computational model to analyse the temporal–spatial stochastic vibrations of vehicle–track systems, where the vehicle–track system is divided into a vehicle subsystem, track subsystem, and interfacial subsystem between the wheel and rail. In this model, the time-varying randomicity of dynamical parameters of the vehicle system, correlation, and randomness of the track structural parameters in the time–space joint dimensions, and randomness of the track random irregularities are considered. A probability dimension-reduction method was used to randomly combine different random variables. Furthermore, the probability density evolution method was applied to solve the delivery problem of probabilities between excitation inputs and response outputs. The temporal–spatial stochastic vibrations of the vehicle–track system with different coefficients of variation were studied, in which we assumed that the dynamic parameters obeyed the normal distribution, and the stochastic simulation method of the track random irregularities is probed into. The calculated results from this model are consistent with the actual measured results and physical conceptions. Thus, the temporal–spatial stochastic evolutionary mechanism can be explored, and the limits of dynamic indices can be formulated by using this developed model.     

客运专线轨道板悬臂门吊起升机构设计

针对京津城际轨道交通工程博格轨道板铺设过程中要求精确对位和平整度微调的要求,介绍了悬臂门吊起升机构总体结构型式的确定、起升机构采用的“四点起吊三点平衡”技术及起重小车和吊具结构形式的确定。实践证明,博格板门吊起升机构技术性能指标达到设计要求,大大提高了施工工效。     

低温独立液舱曲面外板加工减薄量评估

基于耐低温合金材料的非线性特性,以某液化气船的低温独立液舱曲面外板加工成形过程为研究对象,研究其塑形变形过程及机理。利用ABAQUS作为计算分析工具,建立了板材原料及上、下加工模具的分析模型,给定冲压成形的时间和初始速度,并设定时间步长,考察每个时间步长的计算结果,分析了其加工过程中的弹塑性变形过程,评估了低温合金材料在加工过程中的板厚变化情况,并与实际加工测量值进行对比,验证了模型和计算分析过程的准确性。为各类低温独立液舱的设计和材料尺寸选用提供了技术支持和指导。     

合福铁路客专CRTSI型双块式无砟轨道道床板施工技术

结合合福铁路客专闽赣段CRTSI型双块式无砟轨道道床板的施工,介绍CRTSI型双块式无砟轨道轨道精调、道床板施工工艺、创新施工方法,为类似工程提供借鉴。     

某商用车散热器面罩开裂分析与改进

为解决散热器面罩开裂问题,提出了焊点优化方案和散热器面罩加强板外置/加强板内置方案,并进行了模块化设计,制定了2组改进措施。有限元分析结果表明:2种改进措施与原状态相比,均有良好应力改善效果,满足应力要求。     

基于多种失效模式SPS复合钢板替换船用钢板的优化设计

在SPS复合钢板的设计中获取不同的失效模式。以减重为目标,应用序列二次规划法对SPS复合钢板进行等效船用钢板的优化设计,同时对SPS复合钢板进行多目标优化,应用层次分析法定各目标的权重。在这两种优化方法的基础上,对船用钢板与SPS复合钢板进行了屈曲、弯曲对比数值分析,同时将结果与理论计算结果对比分析。结果表明,SPS复合钢板重量能够减轻37%以上,刚度增加两倍多,但厚度增加70%。     

两种大型集装箱船绑扎桥结构强度的对比计算浅析

以大型集装箱船常见的剪力墙式绑扎桥和A型斜撑式绑扎桥为研究对象,基于通用大型有限元分析软件PATRAN/NASTRAN及CCS规范的相关要求,对两种绑扎桥的结构强度进行了对比计算分析。结果表明：两种型式的绑扎桥在结构强度方面相差不大,相比而言,剪力墙式绑扎桥略优于A型斜撑式。     

循环载荷下考虑累积塑性影响的含中心穿透裂纹板CTOD研究

裂纹尖端张开位移(CTOD)是评估结构材料韧性以及分析低周疲劳破坏引起的裂纹扩展的重要参量。结合Dugdale模型,以裂纹尖端累积塑性应变为控制参量,提出了一个循环载荷下含裂纹船体板的CTOD计算模型;利用有限元法模拟了裂纹尖端累积塑性应变、平均应力、裂纹长度等相关因素影响;结合最小二乘法拟合出了基于累积塑性塑性应变、平均应力比以及裂纹长度的两阶多项式。研究表明,基于累积塑性应变的CTOD计算模型为正确评估循环载荷下船体板的累积塑性破坏提供了一种新途径。