交通出行统一帐号的电子支付MaaS运营探索

交通出行已经定位为民生实事,要求2019年全国260个地级以上城市交通出行城际无障碍互联互通,同时交通出行在不断创新的服务推动下已经悄然升级到MaaS一体化智慧出行新时代,电子支付已经成为交通出行MaaS服务的强力推手,必须对各类电子支付实现集约化运营。提出了基于统一帐号的金融级安全+电信级通信能力的交通出行聚合支付体系架构,基于该体系架构交通运营机构可利用自身优势资源,向用户提供多种账户,多种接入方式的出行全业务聚合支付服务,在完成交通运输部城市交通出行互联互通的同时构建了基于资金信息流的出行“数据链”,向云计算和大数据的智慧服务和运营体系推进。     

涌浪条件下斜坡式防波堤堤脚块石稳定性

海外港口工程大部分位于以涌浪为主的海域,防波堤在涌浪作用下的稳定性尚未得到全面认识。对于斜坡堤,除了护面对其稳定性至关重要外,堤脚对其稳定性也很重要。以某一具体港口防波堤工程为例,通过波浪断面和局部整体物理模型试验,对涌浪作用下斜坡堤堤脚块石的稳定性进行了研究。根据试验结果,对比正向和斜向波浪作用下斜坡堤堤脚块石的稳定性结果,重点分析了斜向波浪作用下斜坡堤堤头圆弧段堤脚块石发生破坏的原因及其随入射波浪周期和水位的变化关系,并对原方案堤脚进行了优化。     

加强航海人员VTS意识的必要性

文中首先阐述了VTS的重要性,为进一步发挥VTS作用,提出了加强航海人员VTS意识的必要性,并结合案例进一步论证航海人员VTS意识的重要性,最后结合国际公约及国家的相关规则,对现有航海人员的培训提出细化及增添的建议,提出了通过岸基管理、航海人员的培训及港口国监督等方法来提升航海人员的VTS意识。     

宜昌市夜明珠路总体方案研究

结合宜昌BRT(快速公交系统)建设对宜昌市夜明珠路进行改造,受众多因素控制,道路改造难度较高。介绍了工程建设条件及总体设计方案。总体方案结合路线两侧现状地形、控制因素等不同特点,将路线分为沿河线段和合流线段两个典型路段,并进行方案比选,综合各方面因素,得出了推荐方案。     

Bayesian network for red-light-running prediction at signalized intersections

Abstract

Red-light-running (RLR) is an important reason for the large number of intersection-related fatalities, injuries, and other losses. The accurate RLR prediction can effectively reduce crashes caused by RLR behavior. The RLR prediction is usually composed of two parts: the vehicle’s stop-or-go behavior and the arrival time when the vehicle reaches the stop line. Previous stop-or-go prediction models are usually based on embedded traffic sensors using machine learning algorithms. While based on the continuous trajectories collected by radar sensors, RLR prediction can be conducted more effectively. In this paper, a probabilistic stop-or-go prediction model based on the Bayesian network (BN) is proposed for RLR prediction. We extend the deterministic output into the probabilistic output, which provides decision-makers with greater autonomy. The causality of BN improves the interpretability of the prediction model. The BN model is calibrated and tested by the continuous trajectories data measured by radar sensors installed at a signalized intersection. We not only consider the movement measurements of individual vehicles (e.g., speed and acceleration), but also take into account the car-following behavior. As a comparison, different machine learning models and the model based on the inductive loop detection (ILD) are adopted. The results show that the proposed BN model has a high prediction accuracy and performs better in the feature interpretation. This paper provides a new way for probabilistic RLR prediction based on continuous trajectories, which will significantly improve traffic safety of signalized intersections.     

Railway reforms: do they influence operating efficiency?

This paper considers railway operations in 23 European countries during 1995–2001, where a series of reform initiatives were launched by the European Commission, and analyses whether these reform initiatives improved the efficiency of the railway systems. Efficiency is measured using Multi-directional Efficiency Analysis, which enables investigation of how railway reforms affect the inefficiencies of specific cost drivers. The main findings are that the reform initiatives generally improve technical efficiency but potentially differently for different cost drivers. Specifically, the paper provides empirical evidence that accounting separation is important for improving the efficiency in the use of both material and staff costs, whereas other reforms only influenced one of these factors.

Developing an enhanced weight-based topological map-matching algorithm for intelligent transport systems

Map-matching (MM) algorithms integrate positioning data from a Global Positioning System (or a number of other positioning sensors) with a spatial road map with the aim of identifying the road segment on which a user (or a vehicle) is travelling and the location on that segment. Amongst the family of MM algorithms consisting of geometric, topological, probabilistic and advanced, topological MM (tMM) algorithms are relatively simple, easy and quick, enabling them to be implemented in real-time. Therefore, a tMM algorithm is used in many navigation devices manufactured by industry. However, existing tMM algorithms have a number of limitations which affect their performance relative to advanced MM algorithms. This paper demonstrates that it is possible by addressing these issues to significantly improve the performance of a tMM algorithm. This paper describes the development of an enhanced weight-based tMM algorithm in which the weights are determined from real-world field data using an optimisation technique. Two new weights for turn-restriction at junctions and link connectivity are introduced to improve the performance of matching, especially at junctions. A new procedure is developed for the initial map-matching process. Two consistency checks are introduced to minimise mismatches. The enhanced map-matching algorithm was tested using field data from dense urban areas and suburban areas. The algorithm identified 96.8% and 95.93% of the links correctly for positioning data collected in urban areas of central London and Washington, DC, respectively. In case of suburban area, in the west of London, the algorithm succeeded with 96.71% correct link identification with a horizontal accuracy of 9.81 m (2σ). This is superior to most existing topological MM algorithms and has the potential to support the navigation modules of many Intelligent Transport System (ITS) services.     

Understanding the impacts of a combination of service improvement strategies on bus running time and passenger’s perception

Transit agencies implement many strategies in order to provide an attractive transportation service. This article aims to evaluate the impacts of implementing a combination of strategies, designed to improve the bus transit service, on running time and passenger satisfaction. These strategies include using smart card fare collection, introducing limited-stop bus service, implementing reserved bus lanes, using articulated buses, and implementing transit signal priority (TSP). This study uses stop-level data collected from the Société de transport de Montréal (STM)’s automatic vehicle location (AVL) and automatic passenger count (APC) systems, in Montréal, Canada. The combination of these strategies has lead to a 10.5% decline in running time along the limited stop service compared to the regular service. The regular route running time has increased by 1% on average compared to the initial time period. The study also shows that riders are generally satisfied with the service improvements. They tend to overestimate the savings associated with the implementation of this combination of strategies by 3.5-6.0 min and by 2.5-4.1 min for both the regular route and the limited stop service, respectively. This study helps transit planners and policy makers to better understand the effects of implementing a combination of strategies to improve running time and passenger’s perception of these changes in service.     

The effectiveness of a European speed limit versus an international bunker-levy to reduce CO2 emissions from container shipping

In the fight to reduce CO₂ emissions from international shipping, a bunker-levy is currently under consideration at the International Maritime Organization (IMO). Faced with the inability of the IMO to reach an agreement in the short term, the European Commission is now contemplating a unilateral measure of a speed limit for all ships entering European Union (EU) ports. This paper argues that this measure is counterproductive for two reasons. Firstly, because it may ultimately generate more emissions and incur a cost per ton of CO₂ which is more than society is willing to pay. Secondly, because it is sub-optimal compared to results obtained if an international bunker-levy was to be implemented. These elements are illustrated using two direct transatlantic services operated in 2010.     

结构分割转换工法在地下空间开发中的应用及设想

为了更加快速、安全、高效地完成城市地下空间开发,以结构分割转换工法（CC工法）为研究内容,从工法内涵、工程实践和应用推广3个角度展开研究。首先,基于ＣＣ工法的最新研究成果,从结构分割、建造方案及节点处理3个方面详细介绍CC工法的核心内容;然后,结合工程实践对该工法进行验证性研究,重点比较跨中设缝与柱顶设缝方案的优缺点,介绍该工程地下结构分割、转换的过程,最终证实CC工法建造地下空间的合理性、灵活性及适用性;最后,进行CC工法在富水地层中应用的可行性研究,通过对CC工法与明挖法、暗挖法、型钢混凝土、地面预制装配式结构等技术进行结合应用研究,得出在特定的工程条件下,CC工法也具有与其他先进工法结合应用的价值。