基于ARM单片机的汽车模拟驾驶器设计

在汽车驾驶模拟器中,传感控制系统的性能直接影响到整个汽车驾驶模拟系统的交互性和实时性,是衡量汽车驾驶模拟器实用性能的重要指标,而数据采集和处理系统又是整个传感控制系统的核心。文章介绍了汽车模拟驾驶系统的工作原理和单片机系统的设计思路。结果表明,由于单片机的数据采集系统成本相对较低,接口的可扩展性好,模拟量和开关量的预处理工作也可以由单片机来完成,因此系统完全可以满足汽车驾驶模拟器的交互性和实时性要求,在实际应用中取得了较好的效果。     

一种基于GPS和IC卡数据的城市公交出行分布推算方法

城市公交规划、管理工作迫切需要信息化技术给予定量的决策数据支持.公交出行分布数据通常基于居民出行调查获得,然而因其调查代价巨大不能作为常态化调查手段.短期的公交线网调整工作更依赖于现状的公交出行分布需求,本文由此提出了一种利用公交GPS和IC卡(含老年卡)数据推算现状公交出行分布的实用方法.当前在大城市常住人口使用IC卡作为公交支付手段已得到相当普及,采用基于车载GPS和乘客IC卡记录能够推断得到全日公交OD数据并用于公交出行量回归模型的标定.模型检验通过后,可结合人口数据和就业岗位资料用标定模型计算以投币作为主要付费方式的流动人口公交OD;叠加两部分OD得到完整的城市公交出行分布结果.该模型的有效性通过2010年郑州市综合交通调查实践得以验证,对其它城市具有借鉴意义.     

Decision Support Systems for Public Transport Management: The Athens Public Transport Authority Project

This article reports on an implementation study of a computerised decision support system for public transport management for the Athens Public Transport Authority (APTA). The study analysed the current situation, specified user requirements, determined system functionality, designed the system architecture, organised the project and, finally, planned dissemination activities. The decision support system covers the main public transport management activities of APTA - transport service provision, economic and financial planning, passenger complaints and suggestions, and personnel management - offering its users the possibility to study the potential effects of their decisions before implementation. To achieve this, the system will consist of a data warehousing system, for the integrated management of a wide variety of data sources, and of online analytical processing tools, for information analysis and scenario testing. The system architecture has been designed to offer robustness, flexibility, rich functionality and open connectivity. The system aims to help APTA reduce operational costs and provide a better transport service, attracting more passengers to public transport and reducing, in the process, congestion and pollution.     

Speed variation during peak and off-peak hours on urban arterials in Shanghai

Increased speed variation on urban arterials is associated with reductions in both operational performance and safety. Traffic flow, mean speed, traffic control parameters and geometric design features are known to affect speed variation. An exploratory study of the relationships among these variables could provide a foundation for improving the operational and safety performance of urban arterials, however, such a study has been hampered by problems in measuring speeds. The measurement of speed has traditionally been accomplished using spot speed collection methods such as radar, laser and loop detectors. These methods can cover only limited locations, and consequently are not able to capture speed distributions along an entire network, or even throughout any single road segment. In Shanghai, it is possible to acquire the speed distribution of any roadway segment, over any period of interest, by capturing data from Shanghai’s 50,000+ taxis equipped with Global Positional Systems (GPS). These data, hereafter called Floating Car Data, were used to calculate mean speed and speed variation on 234 road segments from eight urban arterials in downtown Shanghai. Hierarchical models with random variables were developed to account for spatial correlations among segments within each arterial and heterogeneities among arterials. Considering that traffic demand changes throughout the day, AM peak, Noon off-peak, and PM peak hours were studied separately. Results showed that increases in number of lanes and number of access points, the presence of bus stops and increases in mean speed were all associated with increased speed variation, and that increases in traffic volume and traffic signal green times were associated with reduced speed variation. These findings can be used by engineers to minimize speed differences during the road network planning stage and continuing through the traffic management phase.     

A mathematical programming technique for matching time-stamped records in logistics and transportation systems

Time-stamped data for transportation and logistics are essential for estimating times on transportation legs and times between successive stages in logistic processes. Often these data are subject to recording errors and omissions. Matches must then be inferred from the time stamps alone because identifying keys are unavailable, suppressed to preserve confidentiality, or ambiguous because of missing observations. We present an integer programming (IP) model developed for matching successive events in such situations and illustrate its application in three problem settings involving (a) airline operations at an airport, (b) taxi service between an airport and a train station, and (c) taxi services from an airport. With data from the third setting (where a matching key was available), we illustrate the robustness of estimates for median and mean times between events under different random rates for “failure to record”, different screening criteria for outliers, and different target times used in the IP objective. The IP model proves to be a tractable and informative tool for data matching and data cleaning, with a wide range of potential applications.     

Mining missing train logs from Smart Card data

This paper shows how to recover the arrival times of trains from the gate times of metro passengers from Smart Card data. Such technique is essential when a log, the set of records indicating the actual arrival and departure time of each bus or train at each station and also a critical component in reliability analysis of a transportation system, is missing partially or entirely. The procedure reconstructs each train as a sequence of the earliest exit times, called S-epochs, among its alighting passengers at each stations. The procedure first constructs a set of passengers, also known as reference passengers, whose routing choices are easily identifiable. The procedure then computes, from the exit times of the reference passengers, a set of tentative S-epochs based on a detection measure whose validity relies on an extreme-value characteristic of the platform-to-gate movement of alighting passengers. The tentative S-epochs are then finalized to be a true one, or rejected, based on their consistencies with bounds and/or interpolation from prescribed S-epochs of adjacent trains and stations. Tested on 12 daily sets of trains, with varying degrees of missing logs, from three entire metro lines, the method restored the arrival times of 95% of trains within the error of 24 s even when 100% of logs was missing. The mining procedure can also be applied to trains operating under special strategies such as short-turning and skip-stop. The recovered log seems precise enough for the current reliability analysis performed by the city of Seoul.     

From Twitter to detector: Real-time traffic incident detection using social media data

The effectiveness of traditional incident detection is often limited by sparse sensor coverage, and reporting incidents to emergency response systems is labor-intensive. We propose to mine tweet texts to extract incident information on both highways and arterials as an efficient and cost-effective alternative to existing data sources. This paper presents a methodology to crawl, process and filter tweets that are accessible by the public for free. Tweets are acquired from Twitter using the REST API in real time. The process of adaptive data acquisition establishes a dictionary of important keywords and their combinations that can imply traffic incidents (TI). A tweet is then mapped into a high dimensional binary vector in a feature space formed by the dictionary, and classified into either TI related or not. All the TI tweets are then geocoded to determine their locations, and further classified into one of the five incident categories.We apply the methodology in two regions, the Pittsburgh and Philadelphia Metropolitan Areas. Overall, mining tweets holds great potentials to complement existing traffic incident data in a very cheap way. A small sample of tweets acquired from the Twitter API cover most of the incidents reported in the existing data set, and additional incidents can be identified through analyzing tweets text. Twitter also provides ample additional information with a reasonable coverage on arterials. A tweet that is related to TI and geocodable accounts for approximately 5% of all the acquired tweets. Of those geocodable TI tweets, 60–70% are posted by influential users (IU), namely public Twitter accounts mostly owned by public agencies and media, while the rest is contributed by individual users. There is more incident information provided by Twitter on weekends than on weekdays. Within the same day, both individuals and IUs tend to report incidents more frequently during the day time than at night, especially during traffic peak hours. Individual tweets are more likely to report incidents near the center of a city, and the volume of information significantly decays outwards from the center.     

Virtual 3D city model as a priori information source for vehicle localization system

This paper aims at demonstrating the usefulness of integrating virtual 3D models in vehicle localization systems. Usually, vehicle localization algorithms are based on multi-sensor data fusion. Global Navigation Satellite Systems GNSS, as Global Positioning System GPS, are used to provide measurements of the geographic location. Nevertheless, GNSS solutions suffer from signal attenuation and masking, multipath phenomena and lack of visibility, especially in urban areas. That leads to degradation or even a total loss of the positioning information and then unsatisfactory performances. Dead-reckoning and inertial sensors are then often added to back up GPS in case of inaccurate or unavailable measurements or if high frequency location estimation is required. However, the dead-reckoning localization may drift in the long term due to error accumulation. To back up GPS and compensate the drift of the dead reckoning sensors based localization, two approaches integrating a virtual 3D model are proposed in registered with respect to the scene perceived by an on-board sensor. From the real/virtual scenes matching, the transformation (rotation and translation) between the real sensor and the virtual sensor (whose position and orientation are known) can be computed. These two approaches lead to determine the pose of the real sensor embedded on the vehicle. In the first approach, the considered perception sensor is a camera and in the second approach, it is a laser scanner. The first approach is based on image matching between the virtual image extracted from the 3D city model and the real image acquired by the camera. The two major parts are: 1. Detection and matching of feature points in real and virtual images (three features points are compared: Harris corner detector, SIFT and SURF). 2. Pose computation using POSIT algorithm. The second approach is based on the on–board horizontal laser scanner that provides a set of distances between it and the environment. This set of distances is matched with depth information (virtual laser scan data), provided by the virtual 3D city model. The pose estimation provided by these two approaches can be integrated in data fusion formalism. In this paper the result of the first approach is integrated in IMM UKF data fusion formalism. Experimental results obtained using real data illustrate the feasibility and the performances of the proposed approaches.     

Prioritization of failure risk in subsea flexible pipes via data envelopment analysis

Risk-based inspection is nowadays the predominant approach to structural integrity assurance in complex engineering systems, such as those designed for and operated in deepwater environments. One of the major tasks in risk-based planning is risk ranking of the components comprising an engineering system. In this paper, a mathematical model based on data envelopment analysis is developed for this purpose, whereby two types of weights are employed: subjective judgmental weights which are provided as input, and objective which constitute the output of the model. The use of the mathematical model is illustrated in a real world system of subsea flexible pipes, which operational in the south Atlantic Shelf off the Southeast Coast of Brazil.     

船舶结构振动自动测试与数据处理系统

本文介绍船舶结构振动自动测试与数据处理系统的组建及相关的计算机软硬件。使用本系统替代传统的光电和磁带记录仪进行实船结构振动测试，具有实时分析强、操作灵活、便于组成数据库等优点。