船闸引航道异重流淤积分析计算

根据异重流运动的特点,从水体重率沿程变化的机理出发,运用能量原理,推导出异重流淤积计算公式,并用于大源渡船闸引航道淤积计算。所得成果与已有3种公式计算结果的平均值相当,通过类比分析,所得淤积量分布与实测资料一致。     

Optimizing the locations of electric taxi charging stations: A spatial–temporal demand coverage approach

Vehicle electrification is a promising approach towards attaining green transportation. However, the absence of charging stations limits the penetration of electric vehicles. Current approaches for optimizing the locations of charging stations suffer from challenges associated with spatial–temporal dynamic travel demands and the lengthy period required for the charging process. The present article uses the electric taxi (ET) as an example to develop a spatial–temporal demand coverage approach for optimizing the placement of ET charging stations in the space–time context. To this end, public taxi demands with spatial and temporal attributes are extracted from massive taxi GPS data. The cyclical interactions between taxi demands, ETs, and charging stations are modeled with a spatial–temporal path tool. A location model is developed to maximize the level of ET service on the road network and the level of charging service at the stations under spatial and temporal constraints such as the ET range, the charging time, and the capacity of charging stations. The reduced carbon emission generated by used ETs with located charging stations is also evaluated. An experiment conducted in Shenzhen, China demonstrates that the proposed approach not only exhibits good performance in determining ET charging station locations by considering temporal attributes, but also achieves a high quality trade-off between the levels of ET service and charging service. The proposed approach and obtained results help the decision-making of urban ET charging station siting.     

水工模型试验的流速测量方法与数据处理程序

在水工模型试验中,基础数据的准确度与精确度直接关系到科研成果的质量。流速是模型试验中观测的主要数据之一。模型流速的测量方法有许多种,如示踪物法、光电法、声学多普勒法等。光电法是目前水工模型试验中应用最多的流速测量方法。文章所述的模型测杆流速处理程序实现的功能就是计算流速测杆采集流速的平均值并直观地以流速过程线图显示。通过应用于上海国际航运中心洋山港区整体物理模型试验的实践表明,程序采用微调方法,解决了判断涨落潮时存在的问题,提高了水工模型试验工作的精度和效率,为科学决策提供了依据。     

Real-time model predictive control of connected electric vehicles

ABSTRACT

Electric Vehicles (EVs) motors develop high torque at low speeds, resulting in a high rate of acceleration with the added advantage of being fitted with smaller gearboxes. However, a rapid rise of torque in EVs fitted with central drive powertrains can create undesired torsional oscillations, which are influenced by wheel slip and flexibility in the halfshaft. These torsional oscillations in the halfshaft lead to longitudinal oscillations in the vehicle, thus creating problems with regard to comfort and drivability. The significance of using wheel slip in addition to halfshaft torsion for design of anti-jerk controllers for EVs has already been highlighted in our previous research. In this research, we have designed a look-ahead model predictive controller (LA-MPC) that calculates the required motor torque demand to meet the dual objectives of increased traction and anti-jerk control. The designed LA-MPC will improve drivability and energy consumption in connected EVs. The real-time capability of the LA-MPC has been demonstrated through hardware-in-the-loop experiments. The performance of the LA-MPC has been compared to other controllers presented in the literature. A validated high-fidelity longitudinal-dynamics model of the Rav4EV, which is the test vehicle of our research has been used to evaluate the controller.     

车载娱乐总成的静态电流分析

本文对车载娱乐总成的静态电流进行测试,找出其在室温、低温、高温下的分布规律,为车载娱乐总成生产厂家提供优化静态电流的思路。     

温州状元岙化工码头工程潮流泥沙数模研究

采用水动力泥沙条件、底床冲淤演变分析及二维潮流泥沙数值模拟手段,对拟建的温州港状元岙港区化工码头工程方案进行了研究。研究结果表明:(1)工程海区潮汐属于正规半日潮类型,为强潮海区;(2)工程海区潮流性质属于不规则半日浅海潮流,潮流运动呈往复流形式;(3)工程海域深槽多年来在波浪潮流作用下一直处于稳定状态;(4)规划的化工码头走向与涨落潮流走向基本一致;(5)规划的化工码头实施后工程附近海区的涨落潮流速呈增加趋势,码头前沿会略有冲刷;(6)化工码头建设对锚地流场没有影响;(7)化工码头工程方案是合理可行的。     

电动助力转向系统滑模变控制技术研究

以电动助力转向系统中直流助力电机的控制器为研究对象，依据助力电机的数学模型，应用带观测器补偿的滑模变结构控制方法，设计了滑模变控制器，通过调节助力电机的电压，获得预期的输出电流。仿真结果表明，所设计的滑模变控制器使助力电机具有很好的动态性能，系统基本无抖动现象，实现了助力电机输出电流对目标电流的跟踪特性。     

脉宽调制逆变器—异步电动机系统电压,电流的计算机模拟

交—直—交电压型脉宽调制逆变器是牵引领域中很有发展前途的一种逆变器。本文对该种逆变器—异步电动机系统建立了一个通用的数学模型,它具有运算速度快、精度高及对计算机内存容量要求低的特点。从原则上来说可在系统的整个调频范围内,在微型计算机上对任何稳态工况时的逆变器输出电压、电机定、转子电流的基波及谐波分量进行分析,从而为该种系统的研制和改进提供了一个有力的工具。     

电渗法处治过湿土路基填料现场模型试验

电渗法处治过湿土路基填料是一项土工新技术。通过河北省大广高速公路京衡段电渗法处治过湿土现场模型试验,揭示过湿土现场含水量、电流密度和温度随电渗法处治时间而变化的规律,得出施工可行性结论,可为电渗技术在路基中的应用奠定基础。